Manual AVTech - Velleman DVR16T1 (page 9 of 107) (English, German, Dutch, French, Spanish)

621879

Zoom out

Zoom in

1/107

DVR8T1/DVR16T1

V. 02 – 09/10/2015 9 ©Velleman nv

 LAN: Connect to internet by LAN cable.

 EXTERNAL I/O: This port is used to connect external devices (such as speed dome cameras, external

alarms, etc.).

 HDMI: Connect to the HDMI port of a monitor that supports HDMI video output.

Note: You can use the HDMI and VGA output ports simultaneously for dual video output.

 eSATA: Connect to a storage device that supports the eSATA interface. For example, an external hard disk

or a disk array.

Note: Make sure that the disk array supports Linux® to ensure proper functioning.

 VGA: Connect to the VGA port of a monitor that supports HDMI video output.

Note: You can use the HDMI and VGA output ports simultaneously for dual video output.

 IR: Connect the IR receiver extension line for remote control.

 DC 19V: Connect to the supplied adapter.

8. Connection and Setup

8.1 Connecting a Monitor and Camera

1. Obtain a suitable monitor (not included) and connect it to the HDMI video output port on the back of

the DVR.

2. Obtain at least one suitable camera (not included). Each camera needs its own power supply.

3. Connect the video output of the camera to a video input at the back of the DVR (INPUT 1-8/1-16). The

numbers next to the input connectors represent the channel number. Connector type is BNC.

4. Power on the camera(s).

8.2 Switching On

Caution:

 Before the DVR is powered on, make sure that (1) the cameras are connected and powered on for the

detection of the camera video system to be correct, and (2) an HDMI monitor is connected to the DVR for

correct video output detection.

 This device should be operated only with the type of power source indicated on the manufacturer’s label.

Use only the included adapter.

To switch on the DVR:

1. Plug the DC output connector of the included power adapter into the power input (DC 19V) at the back of

the DVR.

2. Plug the included power cable into the adapter input connector and plug the other end into the mains.

3. Switch on the DVR with the power switch on the back of the device. The power LED lights on the front of

the DVR.

Note: To ensure that your DVR works constantly and properly, it is recommended to use an UPS

(Uninterruptible Power Supply, not incl.), for continuous operation.

8.3 Date and Time Setting

Before operating your DVR, please set the date and time on your DVR first.

Note: DO NOT change the date or time of your DVR after the recording function is activated. Otherwise, the

recorded data will be disordered and you will not be able to find the recorded file from backup by time search.

If users change the date or time accidentally when the recording function is activated, it is recommended to

clear all HDD data, and start recording again.

Note: When using the DVR for the first time, leave it powered on for at least 48 hours continuously after the

date and time is set correctly. It prevents DVR time from resetting if the DVR power is disconnected. If the DVR

time resets after power disconnection (for example caused by a power outage), the internal battery may run

down. In that case, you have to replace the internal battery. Please refer to the appendices in the full user

manual for more information.

1. Right-click to enter the DVR password with the password keypad. The default administrator password

is admin.

The status will change from (key lock) to (unlock).

2. Right-click to show the main menu, and select (QUICK START) > TIME SETUP to set the date and time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AVTech - Velleman DVR16T1 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AVTech - Velleman DVR16T1 Manual

Product: