Manual AVTech - Velleman CAMIP17 (page 3 of 37) (English, German, Dutch, French, Spanish)

621839

Zoom out

Zoom in

1/37

CAMIP17

V. 01 – 08/08/2013 3 ©Velleman nv

5. Installation: Hardware

1. Fasten the round base of the bracket to where you want to install the camera with the supplied

three screws. For details about viewing angle and infrared range, refer to the documentation on the

included CD-ROM.

2. Connect the camera with the joint lock connected to the bracket. Next, secure the joint lock.

6. Installation: Power Supply and PoE (Power over Ethernet)

Connection

Power Supply

8P8C network cable

alarm in (yellow)

GND (brown)

RESET (red)

GND (black)

alarm out (pink)

power cable

For your camera to work properly, you need to connect the camera cables as follows:

1. Connect the network cable [1] to your network.

2. Plug the camera’s power cable [7] in a suitable power adapter (12 Vdc 1 A, for example PSSE1210,

not incl.) and connect it to a power socket.

PoE (Power over Ethernet) Connection

The camera features PoE (Power over Ethernet). If your router or hub supports PoE, you do not need to

connect the camera to a power socket. You can then connect the camera as shown below:

PoE router/hub

LAN cable

camera

power

1. Use a network cable [9] to connect your camera [10] to a PoE port of your router [8].

2. Make sure your router is connected to a power socket [11].

Note: If your router does not support PoE, you can use a PoE injector (not included) to use the PoE

feature.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AVTech - Velleman CAMIP17 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AVTech - Velleman CAMIP17 Manual

Product: