621836
8
Zoom out
Zoom in
Previous page
1/82
Next page
CAMIP16
V. 02 10/12/2014 8 ©Velleman nv
b
alarm in (yellow): for external alarm connection
c
GND (brown): ground wire
d
RESET (red): remove the insulation from the wire, and twist it together
with a ground wire to reset the camera to the default settings.
e
GND (black): ground wire
f
alarm out (pink): for external alarm connection
g
power cable
Power Supply using PoE (Power over Ethernet)
The camera features PoE (Power over Ethernet). If your router or hub
supports PoE, you do not need to connect the camera to a power socket.
You can then connect the camera as shown in illustration [X]:
1. Use a network cable [14] to connect your camera to a PoE port of your
router/hub [12].
2. Make sure your router/hub is connected to a power socket [15].
If your router/hub does not support PoE, you can use a PoE injector (not
included) to use the PoE feature. You can then connect the camera as
shown in illustration [Y].
For connecting to a network video recorder (NVR), refer to illustration [Z].
9. Configuration with PC
1. For advanced camera configuration, make sure that your camera is
connected to a PC via the network. Refer to illustrations [X] and [Y].
2. Download and install the “IPscan.exe” program. You can download the
program from:
http://www.surveillance-download.com/user/IPscan.zip
3. Run the program to scan for available devices.
4. Set your PC in the same network segment as the camera that you want
to configure. Example: 192.168.2.xxx (where xxx = 0-255).
5. Note down the IP address and port number of the camera. In this
example, the IP address is 192.168.2.1 and the port number is 88.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVTech - Velleman CAMIP16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVTech - Velleman CAMIP16 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVTech - Velleman CAMIP16

AVTech - Velleman CAMIP16 Additional guide - English, German, Dutch, French, Spanish - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info