621868
12
Zoom out
Zoom in
Previous page
1/71
Next page
CAMCOLD24 - CAMCOLD24W
V. 02 30/05/2013 12 ©Velleman nv
AUTO
The camera switches from day to night and the other way
round along with the amount of light through the lens. The
camera makes colour images during the day and black and
white images during the night. The following extra settings
are used:
BURST: you can switch burst on or off to improve the
image quality. The burst function sends a colour signal to
the monitor in B/W mode. This may degrade the clarity
of the image.
DELAY CNT: delay counter. Defines the delay before the
camera switches from day to night mode or vice versa.
This prevents the camera from switching over too quickly
if the light conditions change only briefly.
DAYNIGHT: sets the threshold for switching from day
to night mode. The lower the setting, the less light is
required to switch to night mode. Recommended settings
are 40-75 for indoors, and 150 for outdoors.
NIGHTDAY: sets the threshold for switching from
night to day mode. The higher the setting, the more light
is required to switch to day mode. Recommended
settings are 50-85 for indoors, and 175 for outdoors.
Remarks:
The DAYNIGHT setting must always be lower than the
NIGHTDAY setting.
Make sure that the difference between the two settings is
large enough. If the settings are too close together, the
camera will switch too often between the two modes.
Note: The AUTO setting should only be used for a camera
not equipped with IR LEDs.
7.10 Noise reduction
Use this function to set the noise reduction mode.
Display: 2DNR
OFF
Noise reduction is switched off.
Y
Use only luminance noise reduction (Y level).
C
Use only colour noise reduction (C level).
Y/C
Use both luminance and colour noise reduction (recommended
setting). Set Y LEVEL for luminance and C LEVEL for colour
noise reduction.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVTech - Velleman CAMCOLD24W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVTech - Velleman CAMCOLD24W in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info