621860

AVTech - Velleman CAMCOLBUL36 Manual

4
Zoom out
Zoom in
Previous page
1/47
Next page
CAMCOLBUL36
V. 01 – 10/03/2014 4 ©Velleman nv
4. Features
This camera is equipped with a Sony EXMOR CMOS image sensor and a high performance image DSP.
The EXMOR high-speed CMOS sensor has enhanced noise reduction and A/D conversion speed. This new
chipset gives a video signal up to 1000 TV lines. The IR-cut filter will filter the IR light, so it cannot
distort the colour image. When it gets dark, the camera automatically switches to night mode. In night
mode, the camera enables the IR LEDs and disables the IR-cut filter.
weatherproof
with B/W night vision (IR LEDs)
super high resolution
vandal-proof bracket
special functions via On-Screen Display (OSD) set-up menu:
o shutter/AGC
o white balance
o 3D noise reduction
o mirror and flip function.
5. Overview
Refer to the illustrations on page 2 of this manual.
1
sun shield
4
bracket
7
screws for fixing the camera
position
2
IR LEDs
5
zoom screw
8
3
lens
6
focus screw
9
6. Hardware Installation
1. Choose a location for the camera, keeping the following guidelines in mind:
o Do not install the camera in locations where extremely high or low temperatures or excessive
vibrations may occur. Do not install near heating or cooling devices.
o Avoid mounting the camera near high electro-magnetic fields.
o Do not aim the camera at the sun or other extremely bright objects or reflections (e.g. metal
doors). This may damage the image sensor.
2. Use the mounting bracket [4] to determine the location of the mounting holes. Drill the holes and
secure the bracket using 3 screws.
3. Connect the power connector [B] to a 12 VDC power supply (not incl.).
4. Connect the BNC connector [A] to a monitor (not incl.).
Note: for optimal image quality, keep the power and video cables as short as possible.
5. To ensure the camera is sufficiently protected against moisture, cover the power and video connectors
(for example using insulating tape).
6. Use a hex key to loosen the positioning screws in the joint [7,8,9]. Point the camera towards the field
of interest and then tighten all the screws again.
7. Use a hex key to adjust the zoom [5] and focus [6].
8. Slide the sun shield [1] over the camera and fix it with the screw.
7. OSD Settings
7.1 Control Buttons
There is a small joystick in the camera cable that allows you to adjust the settings of the camera using
an on-screen display (OSD).
Press and hold the button during ± 2 seconds to access the menu, or press
briefly to select an option.
Press the button upward and downward to move up and down in the menu.
Press the button to the left and to the right to modify the menu parameters.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVTech - Velleman CAMCOLBUL36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVTech - Velleman CAMCOLBUL36 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info