621859

AVTech - Velleman CAMCOLBUL35 Manual

7
Zoom out
Zoom in
Previous page
1/47
Next page
CAMCOLBUL35
V. 01 – 10/03/2014 7 ©Velleman nv
AREA NO 0–7
To define up to 8 areas. Select the desired area and use the settings below.
STATUS: select ON to activate the selected masked area; select OFF to deactivate
the selected masked area.
HORIZON SIZE: set the width [a] (in pixels) of the
masked area.
VERTICAL SIZE: sets the height [b] (in pixels) of the
masked area.
HORIZON MOVE: sets the distance (in pixels) from the
left side of the screen [c] for the masked area.
VERTICAL MOVE: sets the distance (in pixels) from the
top of the screen [d] for the masked area.
7.11 Motion Detection
Use this function to see motion detection during live monitoring. You can define up to 4 separate areas
for motion detection. If the camera detects motion in an area, the outer edge of that area will ‘flash’.
Menu: DIRECTION
SENSITIVITY
Set the motion detection sensitivity. With a higher sensitivity, slighter movements will
be detected. Available options for sensitivity: WEAK (weak); LOW (low); MIDDLE
(medium), and HIGH (high).
AREA NO 0–3
To define up to 4 areas. Select the desired area and use the settings below.
STATUS: select ON to activate the selected detection area; select OFF to deactivate
the selected detection area.
COLOR: set the colour of the detection area. The outer edge of the area will flash in
this colour when the camera detects motion.
HORIZON SIZE: set the width [a] (in pixels) of the
detection area.
VERTICAL SIZE: sets the height [b] (in pixels) of the
detection area.
HORIZON MOVE: sets the distance (in pixels) from the
left side of the screen [c] for the detection area.
VERTICAL MOVE: sets the distance (in pixels) from the
top of the screen [d] for the detection area.
7.12 Language
Use this function to set the language of the OSD menu.
8. Troubleshooting
No image
Check the power supply voltage and polarity. Check if all cables are connected properly. Check if the
correct input channel is selected on the monitor.
Interference/ripples in the image
Interference/ripples can have many causes. Check if the power supply is stable. Keep the camera’s video
and power cables away from existing mains and data cables. Use good quality cables only. If the camera
and monitor are powered from sources with different grounds, this may cause ground loops. In this case,
install a ground loop corrector, or power the camera and the monitor from the same source.
Picture background colour changes continuously
The electromagnetic field from fluorescent lamps may cause colour roll in the image. Either reduce the
number of fluorescent lamps, or increase the distance between the camera and the lamps.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVTech - Velleman CAMCOLBUL35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVTech - Velleman CAMCOLBUL35 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info