559563

AVM ISDN MultiProtocol Router for Windows 2000 ADSL Manual

99
Zoom out
Zoom in
Previous page
1/134
Next page
CAPI 2.0 and Euro-ISDN Messages
NT/MPRI – 7 Messages 98
0x34D2 Identified channel does not exist[#34D2]
The equipment returning this message has received a request
to use a channel not activated to accept calls on the interface.
This message is generated if, for example a primary interface
user has subscribed to channels 1 through 12 and the user’s
equipment or the network attempts to use channels 13 through
23.
0x34D3 A suspended call exists, but this call identity does not[#34D3]
This message indicates an attempt to resume a call with a call
identity which does not match that of any currently suspended
calls.
0x34D4 Call identity in use[#34D4]
The network received a request to resume a call. The suspend
call request contains a call identity which is already in use for
another suspended call.
0x34D5 No call suspended[#34D5]
The network received a request to resume a call. The request
contains call identity elements which do not indicate any cur-
rently suspended call.
0x34D6 Call with the requested call identity has been cleared[#34D6]
The network has received a request to resume a call. The re-
quest contains call identity elements which once indicated a
suspended call; however, that call was cleared down while
suspended (either by network time-out or by one of the parties
to the call).
0x34D8 Incompatible destination[#34D8]
The equipment returning this message received a request to
establish a connection. However, the call has low-layer, high-
layer compatibility or some other attributes which cannot be
accommodated.
0x34DB Invalid transit network selection[#34DB]
This message indicates that a transit network was identified in
an incorrect format.
0x34DF Invalid message, unspecified[#34DF]
This message is returned for an invalid message only when no
other error message in the “invalid message” class applies.
Number Messages/Explanations
ntmpri-e.book Seite 98 Donnerstag, 28. Februar 2002 11:26 11
… 99 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN MultiProtocol Router for Windows 2000 ADSL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN MultiProtocol Router for Windows 2000 ADSL in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info