Manual AVM ISDN MultiProtocol Router for Windows 2000 ADSL (page 84 of 134) (English)

559563

Zoom out

Zoom in

1/134

Problems Connecting

83 NT/MPRI – 6 Tips and Troubleshooting

In addition to destination-specific budgets, the configuration of

global thresholds also can be checked here. Check the “Monitor-

ing / Server Status” window.

The thresholds are listed. If the global threshold for the budget,

connection duration or the number of outgoing calls has been

reached, the corresponding value can be adjusted with the follow-

ing command: “Configuration / Server Settings / Thresholds”.

l Check whether the NT/MPRI is able to connect to the AVM Data

Call Center (ADC). Pre-configured call destinations are provided

for the network protocols TCP/IP and IPX. For instructions on set-

ting up these call destinations and adjusting the configuration if

necessary, please see the section “Test Connection with the AVM

Data Call Center” on page 29.

l If this connection is not successful, install the file transfer pro-

gram Connect32 on the Windows

XP/2000/NT computer and use

it to try connecting to the AVM Data Call Center (number:

+49 (0)30 / 39 98 43 00).

l With dial-up connections, the ISDN error messages 3303 and

3302 indicate a problem with your ISDN line. The ISDN error mes-

sage 3403 means that the service “data” is not enabled on your

ISDN line. In either case, contact your ISDN provider.

l If the problem is not being caused by your ISDN line, use the

NT/MPRI’s packet trace function to trace all PPP over ISDN negoti-

ation packets. To do this, set the “Layer” option to “ISDN-Control-

ler / Network Adapter” and select the desired call destination.

Then click the “REC.” button.

No ADSL Connection to the Internet.

Check the protocol binding of the second network adapter:

While a network adapter is responsible for connecting the NT/MPRI

computer with a local network, the other network adapter is used ex-

clusively for communication with the ADSL modem. The PPPoE (RFC

2516) protocol (included in the Service Wrapper) is used for this com-

munication. Because this protocol transmits the information required

for registration with the ADSL provider via the ADSL modem, this proto-

col must be bound to the network adapter responsible for communica-

tion with the ADSL modem. The protocol is bound automatically to this

network adapter during the NT/MPRI installation. No other protocol is

ntmpri-e.book Seite 83 Donnerstag, 28. Februar 2002 11:26 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN MultiProtocol Router for Windows 2000 ADSL in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AVM ISDN MultiProtocol Router for Windows 2000 ADSL Manual

Product: