559563

AVM ISDN MultiProtocol Router for Windows 2000 ADSL Manual

79
Zoom out
Zoom in
Previous page
1/134
Next page
Cost/Connection Analysis
NT/MPRI – 5 Connection Management and Monitoring 78
l
Direction of the call (incoming, outgoing) and the cost assignment
setting (call destination or LAN)
l CAPI number of the controller through which the connection was
established
l Connection charges for the NT/MPRI and calculation method:
– “AOCD” if charge information is transmitted on your ISDN line
or PBX during connections
– “Charge Profile” if a charge profile for the inactivity timeout or
for charge estimation (“ISDN Settings”) has been selected in
the call destination settings. The NT/MPRI then estimates the
charges based on the selected charge profile
l Duration of the physical connections
An excerpt from the NT/MPRI event log is displayed in the lower frame
so that events can be monitored as they occur.
Cost/Connection Analysis
The following options are available with the “Cost/Connection Analy-
sis” menu command:
l Daily Report of detailed connection information:
The daily report contains exact details on all connections set up
by the NT/MPRI on the given day. The report includes the call des-
tination, number, charges (including the AOCD or charge profile
calculation method), data volume and connection duration, as
well as the number of outgoing and incoming calls.
The cost/connection information is summarized by Call Destina-
tion.
Active logical ISDN connections are not included. These can be
monitored in the “Connection Management” window.
l Selection of a connection and reporting period:
This command allows you to specify which cost/connection infor-
mation should be displayed. Information can be requested by Call
Destination or Number, and queries may be restricted to any giv-
en time period. The “Break down” option determines whether the
cost/connection information for each call destination is summa-
rized by day, week or month. The same details are displayed as in
the daily report.
ntmpri-e.book Seite 78 Donnerstag, 28. Februar 2002 11:26 11
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN MultiProtocol Router for Windows 2000 ADSL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN MultiProtocol Router for Windows 2000 ADSL in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info