559563
46
Zoom out
Zoom in
Previous page
1/134
Next page
Internet Access via ADSL
45 NT/MPRI – 3 Configuration and Operation of the NT/MPRI: The Basics
Step 1:
Open the pre-configured call destination “UUNet over ADSL”. A mask
opens in which the pre-configured data can be changed. Check the in-
formation and add the following if necessary:
The pre-set budget is set to a low monthly value. This value should
probably be changed for normal operation. The status of this setting is
set to “Only configured, not active”. Set this setting to “Active”.
To ensure that the ADSL access is used when a connection to this call
destination is established, the ADSL-Controller must be linked to this
call destination. The ADSL-Controller is linked by reserving the PPPoE
channel of the ADSL-Controller for the call destination “UUNet over
ADSL” under “Configuration / Server Settings / ISDN- and ADSL-Con-
trollers”.
If you have made any changes to the configuration, save them now.
Then select the menu command “Special / Restart Service” and click
the button “Restart Service”.
Step 2:
Next select the menu command “Connection Management”. In the
destination “UUNet over ADSL”, click the “IP” button in the “Action”
column.
A connection to the Internet provider is established. Use the web
browser to visit any Internet sites of interest. Click the “IP” button
again to clear the connection.
Parameter Action
Name:
Enter “UUNet over ADSL”
Number: Enter the [Telephone number the PoP of
UUNet]
Authentication at Remote
Site:
Enter the [line ID][telephone no.][co-user
suffix]
Password: Enter [UUNet Password of the co-user]
Inactivity Timeout: Enable “Always after 60 seconds”
Status of this configura-
tion:
Active
ntmpri-e.book Seite 45 Donnerstag, 28. Februar 2002 11:26 11
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN MultiProtocol Router for Windows 2000 ADSL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN MultiProtocol Router for Windows 2000 ADSL in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info