559563
29
Zoom out
Zoom in
Previous page
1/134
Next page
Joint Installation of AVM Network Services
29 NT/MPRI – 2 Installation and First Steps
Joint Installation of AVM Network Services
If multiple products from the AVM Network Services series are installed
on your system, for instance, the NT/MPRI and the ISDN Access Server,
the joint start page of both products can be used. Access this page at
the following URL:
http://<Name> or <IP address>:4000
For a joint installation of the NT/MPRI and the ISDN Access Server, two
different program icons are generated in the Windows XP/2000/NT
Start menu, but the programs have the same interface. A number of the
menus are valid for both products, including “Server Status”, “Settings
for the ISDN-Controllers” and “Charge Profiles”. Other menus are valid
for only one of these products, like “User” for the ISDN Access Server
and “Call Destinations” for the NT/MPRI.
Changes made in a menu shared by both products thus are implement-
ed for both the NT/MPRI and the ISDN Access Server.
If both program windows are opened at the same time, closing one
window closes the other as well.
2.5 Test Connection with the AVM Data Call Cen-
ter
Once the NT/MPRI has been installed and the Windows XP/2000/NT
computer has been restarted, follow the instructions below to estab-
lish a test connection to a master router at the AVM Data Call Center
(ADC):
1. Start the NT/MPRI Manager.
2. Check the settings for your ISDN-Controller(s) at “Configuration /
Server Settings / ISDN-Controllers”.
By default, the first ISDN-Controller is registered as “Used”. If ad-
ditional ISDN-Controllers are installed in your computer, add them
here. It may be necessary to define additional settings for the
ISDN-Controllers, if you work at a PBX, for instance. See the On-
line Help for more instructions.
3. Check the pre-configured destination “ADC-IP” at “Configuration /
Call Destinations / Configured Call Destinations / ADC-IP”.
The following settings may require modification:
ntmpri-e.book Seite 29 Donnerstag, 28. Februar 2002 11:26 11
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN MultiProtocol Router for Windows 2000 ADSL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN MultiProtocol Router for Windows 2000 ADSL in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info