559560
23
Zoom out
Zoom in
Previous page
1/55
Next page
23
3 Driver Software Installation – MS-DOS
/L#xxxx sets the interface card’s I/O address
/I#xx sets the interface card’s interrupt level (xx is a
hexadecimal number from 08 to 0F; see table)
Note: The value of the command line parameter “/I#” is
not itself the interrupt (IRQ) level! To determine the value
for this parameter that corresponds to the desired inter-
rupt level, refer to the following table:
Table Choosing a valid interrupt
The program AFSERVER.EXE runs a test routine on the
AVM ISDN-Controller T1/T1-B. Please note that the
first argument, “-:l”, is formed with a lower-case L, not with
the numeral 1!
Example:
@cta2.exe /N#01 /L#220 /I#0D /SP#05
@afserver -:l #220 -:b worm.b4
The first command sets the PC interface card with the
board number “01” to the I/O address “220” and the
interrupt 11. The second command tests the ISDN-Con-
troller that is set to the I/O address 220.
The argument “/SP#xx” sets the serial link speed. The
preset value, “05”, must not be changed.
xx#I/nixxfoeulaVxx#I/nixxfoeulaV
xx#I/nixxfoeulaV
xx#I/nixxfoeulaVxx#I/nixxfoeulaV
tpurretnisteStpurretnisteS
tpurretnisteS
tpurretnisteStpurretnisteS
level
3tiB3tiB
3tiB
3tiB3tiB2tiB2tiB
2tiB
2tiB2tiB1tiB1tiB
1tiB
1tiB1tiB0tiB0tiB
0tiB
0tiB0tiBxeHxeH
xeH
xeHxeH
1000 803QRI
100 1 905QRI
10 10 A07QRI
10 11 B09QRI
1100 C001QRI
1101 D011QRI
1110 E021QRI
1111 F051QRI
.0ottesdnadesutonera7ot4stiB
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN-Controller T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN-Controller T1 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM ISDN-Controller T1

AVM ISDN-Controller T1 User Manual - German - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info