559547
39
Zoom out
Zoom in
Previous page
1/47
Next page
Error Messages
Controller C4 – 8 Troubleshooting 39
8.2 Error Messages
Error Messages in Windows 2000
Upgrade from Windows NT 4.0 to Windows 2000
Before you switch your computer over from Windows NT 4.0
to Windows 2000, both the hardware and the software of the
Once the computer has been updated, the ISDN-Controller
hardware and software are re-installed and configured as de-
scribed below.
All other instances of errors and problems
Please refer to the Microsoft Windows 2000 documentation.
Error Messages in Windows NT
Error Message on loading the ISDN-Controller with
“C4 Load”: “Installation Error. Interrupt <xx> not available”
Possible cause: There are no IRQs (interrupts) available to
the PCI bus.
Remedy: Run your BIOS setup (see the PC or mainboard
manual) and allocate at least one free IRQ for use by PCI ad-
apters.
Example (Award BIOS): In the BIOS main menu, select
“PnP/PCI Configuration”, then set “IRQ x assigned to:
PCI/ISA PnP”.
If you combine adapters without Plug-and-Play support in a
system equipped with PCI or ISA Plug-and-Play cards, then
the resources (I/O addresses and IRQ levels) used by the
hardware without Plug-and-Play support should be so desig-
nated in the computer’s BIOS. Otherwise, system resources
may be allocated to more than one adapter, resulting in mal-
functions. Please see your PC or mainboard manual.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN-Controller C4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN-Controller C4 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM ISDN-Controller C4

AVM ISDN-Controller C4 User Manual - German - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info