559279

AVM ISDN-Controller A1 v3.0 Manual

31
Zoom out
Zoom in
Previous page
1/56
Next page
31
3 Driver Software Installation – MS-DOS
US only: Has your SPID or ISDN directory number
changed? To change the ISDN directory number or the
SPID for the AVM ISDN-Controller A1, run the installa-
tion program again and enter the new number and SPID.
You can also edit the file ISDNLOAD.CFG in the installa-
tion directory by using a text editor. Enter the directory
number(s) and SPID value(s) in the [ISDN-Controller-XX]
section:
:DN = X
:SPID = X
:DN2 = X
:SPID2 = X
3.4.2 Configuring the Controller
The I/O address defined by the jumper position must
correspond with the I/O address entered in the Controller
software. To enter the I/O address, run the program A1
Setup. The following dialog appears on the screen:
A1Setup Version 1.2
Hardware configuration for AVM ISDN-Controller A1
Controller I/O adress: 300
(Values permitted are 200, 240, 300, 340, default is 300)
Controller IRQ level: 5
(Values permitted are 2, 3, 4, 5, 6, 7, 10, 11, 12, 15, default is 5)
Press Ctrl + Home to save
(c) Copyright AVM GmbH, Berlin 1997 Press Esc or Ctrl A to cancel
Space = Change value Tab = List
Figure 6 The A1 Setup Program in MS-DOS
Enter the I/O address you chose in the first input field.
The given value can be changed by pressing the space
bar. Press the Tab key to view a list of all possible values.
Select the desired I/O address by moving the highlighted
bar to the desired entry and then press Return.
Enter a new value for the interrupt in the second input
field. Press the space bar or use the Tab key to choose
another value.
Save your entries by pressing Return.
Changing SPID or
Directory No. after
Installation
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN-Controller A1 v3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN-Controller A1 v3.0 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM ISDN-Controller A1 v3.0

AVM ISDN-Controller A1 v3.0 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info