559279
11
Zoom out
Zoom in
Previous page
1/56
Next page
11
2 Hardware Installation
2 Hardware Installation
2.1 Instructions for Various Operating
Systems
The AVM ISDN-Controller A1 can be operated on a
variety of software platforms. The exact installation
procedure for the ISDN-Controller varies according to the
operating system in question.
If you work with Windows NT, Windows 3.x or MS-DOS,
first check which I/O address is available in your PC and
change the jumper position on the Controller if necessary
(see Section 2.2). Then install the Controller and the
driver software.
A different sequence of steps is valid for installation in
Windows 95/98. See the instructions for these operat-
ing systems in Chapter 3, Driver Software Installation.
2.2 Adjusting the I/O Address
In order to manage and use the ISDN-Controller, the
system must communicate with it through an I/O (input/
output) address.
The default values set on the AVM ISDN-Controller A1 are
an I/O address of 300 and an interrupt (IRQ) level of 5.
If the I/O address is already being used by another
adapter, change the setting before installing the Control-
ler. The ISDN-Controller has one jumper row; the position
of the jumper determines the I/O address. The I/O
address corresponding to each jumper position is listed
in Chapter 4, Technical Specifications, and also is
marked beside the jumper contacts on the ISDN-Control-
ler itself. The interrupt can be changed using the A1
Setup program after completion of the software installa-
tion.
Windows NT, Windows
3.x and MS-DOS
Windows 95/98
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN-Controller A1 v3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN-Controller A1 v3.0 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM ISDN-Controller A1 v3.0

AVM ISDN-Controller A1 v3.0 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info