559214

AVM FritzBox 7113 Fon WLAN Manual

109
Zoom out
Zoom in
Previous page
1/122
Next page
Installation,
Configuration
and Operation
FRITZ!Box
Fon 5113
FRITZ!Box Fon WLAN 7113 2
Legal Notice
Legal Notice
FRITZ!Box Fon WLAN 7113
This documentation and the software it describes are protected by copyright. AVM grants the non-
exclusive right to use the software, which is supplied exclusively in what is known as object code
format. The licensee may create only one copy of the software, which may be used exclusively for
backup use.
AVM reserves all rights that are not expressly granted to the licensee. Without previous approval
in writing, and except for in cases permitted by law, it is particularly prohibited to
copy, propagate or in any other manner make this documentation or this software publicly ac-
cessible, or
process, disassemble, reverse engineer, translate, decompile or in any other manner open
the software and subsequently copy, propagate or make the software publicly accessible in
any other manner.
Please consult the “License.txt” file on the product CD included in the package for specifics about
the licensing conditions.
This documentation and software have been produced with all due care and checked for correct-
ness in accordance with the best available technology. AVM GmbH disclaims all liability and war-
ranties, whether express or implied, relating to the AVM product’s quality, performance or suitabi-
lity for any given purpose which deviates from the performance specifications contained in the
product description. The licensee bears all risk in regard to hazards and impairments of quality
which may arise in connection with the use of this product.
AVM will not be liable for damages arising directly or indirectly from the use of the manual or the
software, nor for incidental or consequential damages, except in case of intent or gross negli-
gence. AVM expressly disclaims all liability for the loss of or damage to hardware or software or
data as a result of direct or indirect errors or destruction and for any costs (including connection
charges) related to the documentation and the software and due to incorrect installations not per-
formed by AVM itself.
The information in this manual and the software are subject to change without notice for the pur-
pose of technical improvement.
We offer a manufacturer’s warranty for this original product. The conditions of this warranty are
contained in the “Warranty.pdf” file in the “Info” folder on the product CD included with delivery.
© AVM GmbH 2009 – 2010. All rights reserved. Documentation release 07/2010
AVM in the Internet: www.avm.de/en
Unless otherwise indicated, all trademarks mentioned are legally protected trademarks owned by
AVM. This includes product names and logos in particular. Microsoft, Windows and the Windows
logo are trademarks owned by Microsoft Corporation in the USA and/or other countries. Bluetooth
is a trademark of Bluetooth SIG, Inc. licensed to AVM GmbH. All other product and company
names are trademarks of their respective owners.
AVM Audiovisuelles Marketing
und Computersysteme GmbH
Alt-Moabit 95
D 10559 Berlin
AVM Computersysteme
Vertriebs GmbH
Alt-Moabit 95
D 10559 Berlin
FRITZ!Box Fon WLAN 7270 3
Table of Contents
Symbols and Highlighting . . . . . . . . . . . . . . . . . . . . . . . . . 6
I CONNECTING AND OPERATION . . . . . . . . . . . . . . . . . . . . . . 7
1 Security and Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 FRITZ!Box Fon WLAN 7113 . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.2 Operation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.1 Launching Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2 Connecting to Electrical Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.3 Connecting to the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.4 Connecting Computers to the LAN Port . . . . . . . . . . . . . . . . . . . . . . . . 15
3.5 Connecting Computer(s) Wirelessly via WLAN . . . . . . . . . . . . . . . . . . 17
3.6 Connecting DSL and the Telephone Line. . . . . . . . . . . . . . . . . . . . . . . 20
3.7 Connecting with the Analog Telephone Line. . . . . . . . . . . . . . . . . . . . 21
3.8 Connecting Telephone, Fax, or Answering Machine. . . . . . . . . . . . . . 22
4 Opening the User Interface. . . . . . . . . . . . . . . . . . . . . . . . 23
4.1 Password Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4.2 Save Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5 Internet Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.1 Configuring the Internet Connection Using the Wizard . . . . . . . . . . . 25
5.2 Configuring the Internet Connection Manually. . . . . . . . . . . . . . . . . . 25
5.3 Surfing the Net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6 Telephone Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.1 Entering your Phone Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.2 Setting Up Telephony Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.3 Telephony Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
FRITZ!Box Fon WLAN 7270 4
7 Configuration and Operation on the Telephone . . . . . . . 32
7.1 Instructions for Operation at the Telephone. . . . . . . . . . . . . . . . . . . . 33
7.2 Audible Signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
7.3 Configuring on the Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
7.4 Operation at the Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
8.1 Errors Opening the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
8.2 The WLAN Adapter Cannot Find FRITZ!Box . . . . . . . . . . . . . . . . . . . . . 59
8.3 WLAN Connection Is Not Established . . . . . . . . . . . . . . . . . . . . . . . . . 61
8.4 Obtaining an IP Address Automatically. . . . . . . . . . . . . . . . . . . . . . . . 64
9 Uninstalling the FRITZ!Box . . . . . . . . . . . . . . . . . . . . . . . . 69
II PRODUCT DETAILS AND USEFUL INFORMATION . . . . . . . . 70
1 Product Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
1.1 Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
1.2 LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
1.3 WLAN Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
1.4 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
1.5 Declaration of CE Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
1.6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
2 More about WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
2.1 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
2.2 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
2.3 Frequency Ranges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
2.4 Increasing the WLAN Range Using WDS . . . . . . . . . . . . . . . . . . . . . . . 83
FRITZ!Box Fon WLAN 7270 5
3 More about Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
3.1 Network Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
3.2 IP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
3.3 UPnP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
3.4 IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
3.5 DHCP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
3.6 Subnetwork. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
3.7 Changing the Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
4 More about Internet Telephony . . . . . . . . . . . . . . . . . . . . 96
4.1 Telephony Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
4.2 Bandwidth Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
5 More Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
5.1 Night Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
5.2 Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
6 Customer Service Guide . . . . . . . . . . . . . . . . . . . . . . . . . 100
6.1 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
6.2 information in the Internet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
6.3 Updates and Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
6.4 Support from the Service Team . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
FRITZ!Box Fon WLAN 71130 6
Symbols and Highlighting
Symbols and Highlighting
The following sections present explanations about the symbols and
highlighting used in this manual.
The table below explains the highlighting used in this
manual.
This symbol indicates useful hints to assist you in work-
ing with the FRITZ!Box.
This symbol indicates important instructions that must be
observed to avoid malfunctions.
Highlighting Function Examples
Quotation marks Keys
Buttons
Settings pages
Menus
Commands
File paths
File names
“F1” key
“Help”
“Advanced”
“Edit/Paste”
“Copy”
“C:/My Documents”
“Documentation”
Underlined text Text input fritz.box
Pointed brackets Joker <MSN>
Bold Emphasis Do not click the but-
ton...
For detailed information about the numerals and function
keys used in the manual, see the section “Operation at
the Telephone” on page 42.
Security and Handling
FRITZ!Box Fon WLAN 71130 7
I CONNECTING AND OPERATION
1 Security and Handling
What to Watch out for
Safety Instructions When working with the FRITZ!Box Fon WLAN 71130, ob-
serve the following security instructions in order to protect
yourself and the FRITZ!Box from harm.
Do not install the FRITZ!Box during an electrical
storm.
Disconnect FRITZ!Box from the power supply during
electrical storms.
Never let liquids get inside the FRITZ!Box. Otherwise,
electric shocks or short circuits may result.
The FRITZ!Box is intended for indoor use only.
Do not open the FRITZ!Box housing. The device con-
tains hazardous components and should only be
opened by authorized repair technicians.
Handling the
FRITZ!Box
You can either place FRITZ!Box on a horizontal surface or
mount it on a wall. Please note the following:
Place or hang the FRITZ!Box in a dry location that is
free of dust and protected from direct sunlight.
Do not place the FRITZ!Box on excessively heat-sensi-
tive surfaces, as the base of the device can heat up
during normal operation.
Make sure that the ventilation slits are unobstructed.
For this reason the FRITZ!Box should not be placed on
a carpet or on upholstered furniture. The ventilation
slits provide for air cooling of the FRITZ!Box.
When connecting FRITZ!Box to your computer using
the network, remember to take the length of the ca-
ble into account.
FRITZ!Box Fon WLAN 71130 8
Security and Handling
If you would like to establish wireless connections
between the FRITZ!Box and the computer, position
the device at a central location.
Make sure to keep sufficient distance from potential
sources of interference like microwave devices or
electric devices with large metal housings.
For detailed information about the symbols, numerals
and function keys used in the manual, see the sections
“Symbols and Highlighting” on page 6 and “Instructions
for Operation at the Telephone” on page 33.
FRITZ!Box Fon WLAN 7113
FRITZ!Box Fon WLAN 7113 9
2 FRITZ!Box Fon WLAN 7113
An Overview
The FRITZ!Box is a DSL modem that connects your computers directly
with your DSL line. Each connected computer can establish an Internet
connection over the FRITZ!Box. As a WLAN access point, FRITZ!Box of-
fers you the possibility of connecting your computer to the DSL line
wirelessly.
The FRITZ!Box is a Private Branch Exchange (PBX) for making telephone
calls via the Internet and the fixed-line network.
Possibilities for connecting FRITZ!Box
PBX Two analog telephones, fax machines and answering ma-
chines can be connected to FRITZ!Box to take advantage of
the features of ISDN.
Connecting
Computers
A computer can be connected directly to FRITZ!Box’s LAN
port.
You can also connect a network hub or switch to the LAN
ports so that even more computers can be connected to
FRITZ!Box.
WLAN Access Point The FRITZ!Box is a WLAN access point. All computers
equipped with a WLAN adapter can be wirelessly connect-
ed to the FRITZ!Box.
FON 1 FON 2
FON 1 FON 2
ADSL line
with telephone line
Analog phone, fax
Computer, game console,
network
Notebook, computer,
PDA
FRITZ!Box Fon WLAN 7113 10
Package Contents
Local Network All of the computers connected with the FRITZ!Box consti-
tute a network and can share access to any files released
for file sharing.
Internet All of the computers connected to the FRITZ!Box can ac-
cess the Internet.
The FRITZ!Box works as a DSL router, making the Internet
connection available to all connected computers. All con-
nected computers can then use the Internet connection at
the same time.
Firewall The FRITZ!Box is equipped with an integrated firewall. The
integrated firewall protects your network from attacks
from the Internet as long as the FRITZ!Box is operated as a
router.
Network Devices Other network devices can also be connected to the net-
work port of the FRITZ!Box, for instance game consoles.
Operating Systems
Supported
The FRITZ!Box can be connected to computers with Win-
dows operating systems, the Linux operating system or
Apple computers with the Mac OS X operating system.
2.1 Package Contents
The following is included in the FRITZ!Box Fon WLAN 7113
package:
FRITZ!Box Fon WLAN 7113
one power supply unit with a cable for connection to
the power mains
one DSL/telephone cable for connecting the
FRITZ!Box to your DSL line
one network cable for connection to a computer or a
network
one FRITZ!Box CD with
– Installation Help
– documentation for all enclosed AVM components
one quick guide
Operation Requirements
FRITZ!Box Fon WLAN 7113 11
2.2 Operation Requirements
In order to operate the FRITZ!Box, you must have the fol-
lowing:
a Web browser that supports Java script (for instance,
Internet Explorer version 6.0 or higher, or Firefox
version 1.5 or higher)
Internet connection:
– DSL line, ITU G.992.1 standard Annex A,
ITU G.992.3 standard Annex A, ITU G.992.5 stan-
dard Annex A
– or a cable line with cable modem
– or another Internet connection
for connection via WLAN:
computer with a WLAN adapter compliant with
IEEE 802.11n draft 2.0, IEEE 802.11g, or IEEE 802.11b,
for example a FRITZ!WLAN USB Stick
for connection via network cable:
computer with a network port (network adapter
standard Ethernet 10/100 Base-T)
for fixed-line telephony:
one analog telephone line
FRITZ!Box Fon WLAN 7113 12
Connection
3Connection
Connecting FRITZ!Box
This chapter contains instructions on the following topics:
Launching FRITZ!Box Operation
Connecting FRITZ!Box to electrical power
Connecting one or several computers to the FRITZ!Box
connecting FRITZ!Box to DSL.
Connecting FRITZ!Box to the Analog Telephone Line
Connecting analog terminal devices to the FRITZ!Box
3.1 Launching Operation
Using the Installation Help on the CD
On computers with Windows operating systems you can
use the Installation Help on the FRITZ!Box CD. The Installa-
tion Help presents instructions on the screen, guiding you
through the steps required to launch operation of the
FRITZ!Box.
1. Insert the FRITZ!Box CD in the CD-ROM drive of your
computer.
The Installation Help starts automatically.
2. Follow the instructions in the Installation Help to pre-
pare the FRITZ!Box for operation.
At the conclusion of the Installation Help, you will be rout-
ed directly to the FRITZ!Box user interface.
Please see the instructions about setting up the
FRITZ!Box in section “Security and Handling” on page 7.
We recommend using the Installation Help on the
FRITZ!Box CD when launching operation of the FRITZ!Box
for the first time.
Launching Operation without the Installation Help CD
FRITZ!Box Fon WLAN 7113 13
Launching Operation without the Installation Help CD
If you do not want to use the Installation Help on the
FRITZ!Box CD, then work through the instructions below in
the recommended order:
1. Mounting FRITZ!Box; see the section “Security and
Handling” from page 7.
2. Connecting FRITZ!Box to the power supply; see the
section “Connecting to Electrical Power” on page 13.
3. Connecting FRITZ!Box to the computer(s); see the
section “Connecting to the Computer” on page 14.
4. Connecting FRITZ!Box to DSL; see section “Connect-
ing DSL and the Telephone Line” from page 20.
5. If you want to make telephone calls with the fixed-
line network using FRITZ!Box: see the section “Con-
necting with the Analog Telephone Line” on page 21.
6. If you want to make telephone calls and fax using the
FRITZ!Box over the Internet and/or the fixed-line net-
work, connect your analog equipment to the
FRITZ!Box: See the section “Connecting Telephone,
Fax, or Answering Machine” on page 22.
3.2 Connecting to Electrical Power
Connecting to the power supply
FRITZ!Box Fon WLAN 7113 14
Connecting to the Computer
Connecting Set aside the power supply unit out of the FRITZ!Box
package.
1. Connect the power supply unit to the socket on the
FRITZ!Box labeled “Power”.
2. Plug the other end into an AC power outlet.
The green “Power/DSL” LED will light up after a few sec-
onds to indicate that the device is ready for operation.
3.3 Connecting to the Computer
If you would like to surf the web using the FRITZ!Box or to
open the FRITZ!Box user interface, then you must connect
a computer with the FRITZ!Box.
A computer can be connected with the FRITZ!Box in two
different ways:
via a LAN port
wirelessly via WLAN
Properties Note the following when connecting computers to the
FRITZ!Box:
One computer can be connected to the FRITZ!Box by
only one of these means.
At the network port of the FRITZ!Box, a computer can
be connected directly or via a hub/switch.
Using WLAN you can connect multiple computers wi-
th the FRITZ!Box at the same time.
The way a computer is connected to the FRITZ!Box is
the same regardless of the operating system on the
computer.
All of the computers connected with the FRITZ!Box
constitute a network.
Connecting Computers to the LAN Port
FRITZ!Box Fon WLAN 7113 15
3.4 Connecting Computers to the LAN Port
If you would like to connect a computer to the LAN port of
the FRITZ!Box, make sure the computer is equipped with a
LAN port (network adapter). A LAN port is usually desig-
nated by the icon at left or labeled “LAN”.
Connecting a computer to a LAN port on the FRITZ!Box
Connecting Set aside the network cable (red) from the FRITZ!Box
package.
1. Switch on your computer.
2. If you work with a Linux operating system, use YaST
to configure your network card with the setting
“DHCP”, if this setting is not already configured.
3. Insert one end of the LAN cable to the computer’s
network adapter.
4. Connect the other end of the network cable to one of
the sockets on FRITZ!Box labeled ”LAN”.
Now the FRITZ!Box and computer are connected to each
other.
FRITZ!Box Fon WLAN 7113 16
Connecting a Network Hub or Switch
Connecting a Network Hub or Switch
You can connect a network hub or switch to the LAN port if
you would like to connect multiple computers to the
FRITZ!Box via LAN.
Connecting FRITZ!Box to a network hub
Connecting Set aside the network cable (red) from the FRITZ!Box
package.
1. Connect one end of the LAN cable to the uplink port
of the network hub or switch.
2. Connect the other end of the cable to the socket on
the FRITZ!Box labeled LAN.
The FRITZ!Box and network hub are now connected with
each other.
Connecting Computer(s) Wirelessly via WLAN
FRITZ!Box Fon WLAN 7113 17
3.5 Connecting Computer(s) Wirelessly via WLAN
Using WLAN you can connect one or multiple computers
with the FRITZ!Box wirelessly.
The wireless WLAN connection is independent of the operat-
ing system used. Each computer to be connected to the
FRITZ!Box via WLAN must support WLAN, by means of a com-
patible WLAN adapter, for instance the FRITZ!WLAN USB
Stick.
Presettings in the FRITZ!Box
The FRITZ!Box is delivered with preset values for WLAN se-
curity. These values must also be entered on the computer
with the WLAN adapter in order to be able to establish a
successful WLAN connection.
The following values are configured in the FRITZ!Box facto-
ry settings:
For more information on WLAN, see the section “More
about WLAN” from page 77.
Setting Preset Value
SSID (name of the radio
network)
FRITZ!Box Fon WLAN 7113
Encryption methods WPA (TKIP) and WPA2 (AES-
CCMP)
Encryption WPA PSK
Key The key is printed on the
sticker attached to the base of
the device.
Network mode Infrastructure
FRITZ!Box Fon WLAN 7113 18
Connect Using a WLAN Adapter
Connect Using a WLAN Adapter
You can connect computers with the FRITZ!Box wirelessly
as soon as you have installed a WLAN adapter and config-
ured WLAN software.
Installing 1. Switch on your computer.
2. Install a WLAN adapter, for instance the FRITZ!WLAN
USB Stick, on your computer along with the appropri-
ate software. Please take note of the instructions in
the documentation of the adapter.
Once installation has been completed, you generally have
software available to control your WLAN connections. In
the Windows operating systems you can open the user in-
terface of the WLAN software by clicking an icon in the
taskbar (specific to each manufacturer) or from the start
menu.
Alternatively, you can use the WLAN software supplied wi-
th the operating system to establish a WLAN connection to
the FRITZ!Box.
Establishing a
Connection
This description uses the values given in the section
“Presettings in the FRITZ!Box” on page 17.
If you would like to establish a WLAN connection using
these preset values, then your WLAN adapter must
support the WPA encryption procedure.
1. Start the WLAN software.
2. Select the SSID (WLAN radio network) “FRITZ!Box Fon
WLAN 7113” in the user interface.
If the radio network is not displayed, follow the
instructions in the section “The WLAN Adapter
Cannot Find FRITZ!Box” from page 59.
3. Set “Infrastructure” as the network mode.
4. Select “WPA PSK” as encryption or authentication.
5. Enter the preset key in the “Network Key” field. The
key is printed on the sticker on the base of your
FRITZ!Box.
Connect Using a WLAN Adapter
FRITZ!Box Fon WLAN 7113 19
Sticker with sample values
6. Confirm your entries using the relevant button in the
user interface (for instance, “OK” or “Connect”).
The WLAN connection is established.
7. Now read the security instructions in the section “Se-
curity” from page 79.
Further WLAN settings can be configured in the user inter-
face of your FRITZ!Box. See the section “Opening the User
Interface” on page 23 for instructions on how to open the
interface.
WLAN Adapter Does
Not Support WPA
If your WLAN adapter does not support the WPA security
mechanism, you must change the WLAN settings in the
FRITZ!Box to WEP.
Proceed as follows to change the encryption method:
1. Connect the FRITZ!Box and the computer using the
network cable (see the section “Connecting Comput-
ers to the LAN Port” from page 15).
2. Start a web browser.
3. Enter fritz.box
in the address field.
The FRITZ!Box user interface opens.
From today’s perspective, WEP encryption does not offer
adequate protection. Contact the manufacturer of your
WLAN adapter for an update that makes the adapter able
to support WPA. We strongly advise against using WEP for
encryption in the long term!
FRITZ!Box Fon WLAN 7113 20
Connecting DSL and the Telephone Line
4. In the “WLAN / WLAN Security” menu, select WEP en-
cryption and enter the network key you have chosen.
5. Click the “Apply” button.
A window is displayed with the WLAN security settings.
Print out the page by clicking “Print Page”. The data in the
printout will be needed for the WLAN configuration of your
WLAN adapter.
6. Close the user interface.
7. Remove the network cable connecting the computer
and the FRITZ!Box.
3.6 Connecting DSL and the Telephone Line
Connecting to the DSL splitter
Connecting If you have a DSL line and a telephone line, then connect
the FRITZ!Box using the DSL/telephone cable (gray-black).
Connecting with the Analog Telephone Line
FRITZ!Box Fon WLAN 7113 21
1. Connect the longer of the two gray ends of the cable
to the port labeled “DSL/TEL”.
2. Then connect the shorter, gray end of the cable to the
socket on the DSL splitter labeled “DSL”.
The green “Power” LED stops flashing after a short time
and remains lit to signalize that FRITZ!Box is ready for In-
ternet connections over DSL.
3.7 Connecting with the Analog Telephone Line
Your telephone line is either an analog line or an ISDN
line.
If you have an analog telephone line, read here about how
to connect the FRITZ!Box with the analog telephone line.
Connecting to the analog telephone line via the DSL splitter
The black branch of the Y-shaped cable is for connec-
tion to the telephone line (see the sectionspage 21).
FRITZ!Box Fon WLAN 7113 22
Connecting Telephone, Fax, or Answering Machine
Connecting Set aside the Y-shaped cable (gray-black) delivered in the
package. This cable is a combined DSL/telephone cable.
1. Connect the longer gray end of the cable to the sock-
et on the FRITZ!Box labeled “DSL/TEL”.
2. Then insert the black plug into the appropriate jack
of your DSL splitter.
Now the FRITZ!Box and the analog telephone line are con-
nected.
3.8 Connecting Telephone, Fax, or Answering Machine
The FRITZ!Box provides Internet and/or fixed-line telepho-
ny for analog terminal devices.
You can connect two analog terminal devices like tele-
phones, fax machine or answering machine to the
FRITZ!Box.
Analog devices with RJ11 plugs are connected to the RJ11
sockets“FON 1” and “FON 2”. These two sockets are locat-
ed on the back panel of the FRITZ!Box.
Connecting an analog telephone to an RJ11 jack
Now your analog device is connected with the FRITZ!Box.
Opening the User Interface
FRITZ!Box Fon WLAN 7113 23
4 Opening the User Interface
fritz.box
The FRITZ!Box has a user interface that can be used in a web browser.
The user interface presents information about the FRITZ!Box product,
terminals and connections. This is where you configure all of the set-
tings for operating the FRITZ!Box.
The user interface can be opened from any computer con-
nected with the FRITZ!Box. The settings you configure are
saved in the FRITZ!Box.
Starting 1. Start a web browser on your computer.
2. Enter “fritz.box”
in the address line of the browser.
The “fritz.box” address entry in the address field of an Internet
browser
The FRITZ!Box user interface opens.
4.1 Password Protection
Use the password protection set up for the user interface
to protect your settings and all information in the
FRITZ!Box from unauthorized access.
Here is how to set up the password protection in the
FRITZ!Box:
1. Open the FRITZ!Box user interface.
2. Select “Advanced Settings / System / FRITZ!Box
Password” in the FRITZ!Box Settings” area.
3. Enable password protection and enter a password.
4. Save your settings by clicking “Apply”.
If the user interface does not open, please see the in-
structions in the section “Errors Opening the User Inter-
face” on page 53.
FRITZ!Box Fon WLAN 7113 24
Save Settings
Be sure to use a password you can remember easily. If you
forget the password, the only way to access the FRITZ!Box
is to restore the factory settings. All settings made during
operation will be overwritten. Then you can open the user
interface again in order to reconfigure your settings or re-
store the settings you saved during previous operation.
4.2 Save Settings
The settings you made in the FRITZ!Box can be saved as a
file on your computer. This file contains all user-defined
settings, including the account information for the Inter-
net and telephony connections. This settings file can be
loaded back into your FRITZ!Box at any time.
The FRITZ!Box features a Wizard to accompany you step by
step through the process of saving and restoring your set-
tings.
Internet Connections
FRITZ!Box Fon WLAN 7113 25
5 Internet Connections
Setting Up Internet Connections
In order to allow Internet access with the FRITZ!Box, you must first con-
figure the Internet connection in the FRITZ!Box user interface.
The FRITZ!Box can be operated directly at the DSL line. Alternatively, it
can be connected to a cable modem, a DSL modem, or a DSL router, or
integrated into an existing network.
If no DSL line is available, the Internet connection can be established
over the mobile telephone network using a USB modem.
5.1 Configuring the Internet Connection Using the Wizard
If the FRITZ!Box is connected directly to the DSL line, the
account information from your Internet Service Provider is
required to configure the Internet connection in the
FRITZ!Box.
Use the Wizard to configure the Internet connection:
1. Open the FRITZ!Box user interface.
2. In the “Settings” area, please select the “Wizards”
menu.
3. Click the “Configure Internet Connection” Wizard and
follow the instructions.
Once configuration has been completed, all of the com-
puters connected with the FRITZ!Box can be used to surf
the Internet without any further settings required.
5.2 Configuring the Internet Connection Manually
Changes to the Internet connection settings can be made
in the FRITZ!Box user interface.
Proceed as follows:
1. Open the FRITZ!Box user interface.
2. Select the “Advanced Settings” menu in the “Set-
tings” area.
3. Select “Internet / Account Information”.
FRITZ!Box Fon WLAN 7113 26
Surfing the Net
4. Select the setting “Use one Internet connection for
all computers (router)” if this setting is not already
configured.
5. Enter in these fields the Internet account information
you received from your Internet Service Provider. Take
advantage of the Help available in the FRITZ!Box user
interface for more information and instructions.
6. As a final step, click “Apply”.
If the FRITZ!Box is connected to a cable modem, a DSL mo-
dem or a router, or integrated into an existing network,
you must also configure your Internet connection as de-
scribed above. To do so, enable the expert view in the
“System / Expert Mode” menu.
5.3 Surfing the Net
Once you have set up the Internet connection in your
FRITZ!Box, you can surf the Internet with any computer
connected to the FRITZ!Box.
1. Start a web browser on your computer.
2. Enter in the address field the URL of the Internet page
you would like to visit, for instance
“http://www.avm.de/en”.
Telephone Connections
FRITZ!Box Fon WLAN 7113 27
6 Telephone Connections
Configuring FRITZ!Box for Telephony
Using the FRITZ!Box you can make telephone calls via the Internet and
the fixed-line network.
Once you have connected the FRITZ!Box as described in the chapter
“Connection” from page 12, you can configure the FRITZ!Box for making
telephone calls.
The configuration is performed in two consecutive steps:
entering your phone numbers
configuring the connected telephony equipment
6.1 Entering your Phone Numbers
The “Enter Your Phone Numbers” Wizard supports you in
performing the following tasks:
entering Internet telephone numbers
entering fixed-line telephone numbers
changing numbers already entered
deleting entered numbers
In the “Settings“ area of the FRITZ!Box user interface
there are various Wizards for the configuration of your
FRITZ!Box. We recommend using these step-by-step in-
structions.
If you used the Basic Configuration Wizard after connect-
ing your FRITZ!Box and entered numbers then, these num-
bers are already entered in your FRITZ!Box. In this case
you can start right away with the configuration of the con-
nected telephony devices.
FRITZ!Box Fon WLAN 7113 28
Entering New Internet Telephone Numbers
Entering New Internet Telephone Numbers
In order to be able to make calls via the Internet with the
FRITZ!Box, you will need an Internet telephone number
from an Internet telephony carrier. Enter the Internet tele-
phone number in the FRITZ!Box.
You can enter multiple Internet numbers in the FRITZ!Box.
The Internet numbers can be from one or from multiple dif-
ferent Internet telephony providers.
Entering Fixed-line Numbers
In order to make calls via the analog fixed-line network wi-
th the FRITZ!Box, enter your telephone numbers in the
FRITZ!Box.
6.2 Setting Up Telephony Devices
For the configuration of telephony equipment, the “Con-
figure Telephony Devices” Wizard is available in the
FRITZ!Box.
Telephony Devices Supported
The following telephony devices are supported by the
FRITZ!Box:
Telephones
– analog telephones
– analog telephones with an integrated answering
machine
Answering machine
If you have connected an analog answering machine
(to the “FON 1” or “FON 2” jack, for instance), config-
ure it as an answering machine.
Fax machines
The FRITZ!Box supports:
– analog fax machines
– analog fax-telephone combinations
Settings for Telephony Devices
FRITZ!Box Fon WLAN 7113 29
Settings for Telephony Devices
Telephony equipment like telephones, faxes and answer-
ing machines can be connected to the FRITZ!Box. The “Con-
figure Telephony Devices” Wizard can assist you in config-
uring the necessary settings for all telephony devices.
Devices Connected to
the FRITZ!Box
Telephone
– kind of connection used to connect the telephone
with the FRITZ!Box
– internal name for the telephone
– number used to conduct outgoing calls: With this
entry you specify whether outgoing calls should
be conducted via the Internet or the fixed-line net-
work.
– Call acceptance: Specify here whether the tele-
phone should react to all calls or only to calls for
certain telephone numbers.
Fax machine
– Kind of connection used to connect the fax
machine with the FRITZ!Box
– internal name for the fax machine
– Number used to send faxes: This entry defines
whether outgoing faxes are sent via the Internet
or the fixed-line network.
– Call acceptance: Here you define the numbers to
which the fax machine should react.
Answering machine
– Kind of connection used to connect the answering
machine with the FRITZ!Box.
– internal name for the answering machine
– Call acceptance: Enter here whether the answer-
ing machine should react to all calls or only to
calls for certain numbers.
FRITZ!Box Fon WLAN 7113 30
Telephony Functions
6.3 Telephony Functions
Call List
The Call List displays outgoing calls and sent faxes, in-
coming calls and faxes, as well as incoming calls in ab-
sence.
If the number of a caller or someone called is entered in
the Telephone Book, the Call List will display the name
from the Telephone Book.
The Call List can be saved as a file.
Menu The Call List is found in the “Settings / Advanced Set-
tings” area, in the “Telephony / Calls” section.
Telephone Book
A Telephone Book is at your disposal in the FRITZ!Box.
Menu The “Telephone Book” is found in the “Settings / Advan-
ced Settings” area, in the “Telephony” menu.
Block Calls
The telephone number block of the FRITZ!Box offers you
the following options:
Numbers and number ranges can be blocked for out-
going calls
From the FRITZ!Box no outgoing calls to a blocked
number range are possible. In this manner you can
block connections to certain mobile networks, for in-
stance.
blocking telephone numbers for incoming calls
For incoming calls you can block certain numbers to
avoid receiving calls from unwanted callers.
More functions and settings options for telephony are
available in the “Settings / Advanced Settings” area, in
the “Telephony” menu.
Alarm
FRITZ!Box Fon WLAN 7113 31
Menu The command for blocking calls is located in the “Settings
/ Advanced Settings” area, in the “Telephony / Calls”
menu.
Alarm
With the alarm function you can use the telephones con-
nected to the FRITZ!Box as alarm clocks.
You can specify several different times for the alarm
to go off.
An individual telephone can be selected for the alarm
function.
Menu The “Alarm” function is located in the “Settings / Advan-
ced Settings” area, in the “Telephony” menu.
Dialing Rules
Dialing rules specify when calls are conducted on the
fixed-line network, and when they take place over the In-
ternet.
All connections to number ranges for which a dialing rule
has been defined are established using the specified con-
nection type.
Menu The “Dialing Rules” menu is located in the “Settings / Ad-
vanced Settings / Telephony” area.
FRITZ!Box Fon WLAN 7113 32
Configuration and Operation on the Telephone
7 Configuration and Operation on the Telephone
FRITZ!Box Keypad Sequences
Many of the FRITZ!Box functions and features can be con-
figured and used over a telephone connected to a
FRITZ!Box extension. Only tone-dialing (dual-tone multi-
frequency = DTMF) telephones can be used in configura-
tion and operation. Pulse dialing telephones are not suit-
able.
Acknowledgment
Tone
Entries input on the telephone are confirmed with ac-
knowledgement tones (see also “Audible Signals” on
page 34):
Entries made correctly are confirmed with a positive
acknowledgement tone (a single tone of one second
in length).
If the entry was not successful, because of an incor-
rect key sequence, for instance, you hear a negative
acknowledgment tone (an intermittent tone broken
into intervals of about 0.25 seconds).
The telephone network features can be used only if they
are supported by your telephone network carrier and en-
abled on your telephone line.
Instructions for Operation at the Telephone
FRITZ!Box Fon WLAN 7113 33
7.1 Instructions for Operation at the Telephone
The table explains the symbols used in this chapter:
M Dial a number.
N Pick up the handset.
O Hang up the handset.
P Talk.
D Three-party conference call
Q Wait for the acknowledgement tone.
K You hear the ring tone.
<Ext.> Enter an extension number (Ext.).
In the place of the abbreviation <Ext.> used
here, enter the number 1, 2 or a higher
number, corresponding to the extension
you would like to configure.
<MSN> Enter an ISDN number (MSN).
In place of the abbreviation <MSN> used
here, enter the complete MSN desired, wit-
hout any dialing prefix.
<DNo> Enter an external telephone number (desti-
nation number).
In the place of the abbreviation <DNo>, en-
ter the complete number of the external
line.
<DNo./Ext.> Enter the external telephone number (des-
tination number) or extension number
(Ext.) to which your calls are to be diverted.
FRITZ!Box Fon WLAN 7113 34
Audible Signals
7.2 Audible Signals
The following diagram illustrates the duration and inter-
vals of the various audio signals and ring tones of the tele-
phones connected to the FRITZ!Box Fon WLAN 7113.
Audio signals and ring tones of the connected telephones
Configuring on the Telephone
FRITZ!Box Fon WLAN 7113 35
7.3 Configuring on the Telephone
Saving New Settings
In this section, saving refers to all current settings made in
the FRITZ!Box. It is not necessary to save the configuration
immediately after every change. You may first configure all
of your settings as desired, and then save them perma-
nently.
Restoring Factory Settings
The FRITZ!Box can be reset to its condition upon delivery
by restoring factory settings.
After restoring factory settings, the FRITZ!Box is restarted.
Permanent saving cannot be reversed. However, you can
change the settings by using new commands or restore
the FRITZ!Box to its factory settings.
Saving Permanently
N Pick up the handset.
r91ss Save all settings permanently by dialing the
sequence shown at left.
O Hang up the handset.
All settings you made in the FRITZ!Box—including the con-
figured Internet connection—are deleted when the factory
settings are restored.
Restoring Factory Settings
r991s159
01590s
resets the FRITZ!Box to its condition upon
delivery
FRITZ!Box Fon WLAN 7113 36
Enabling/Disabling WLAN
Enabling/Disabling WLAN
The WLAN function can be switched on and off using the
telephone keypad. This is especially convenient when the
WLAN function has been switched off. Simply use your
telephone to turn it back on. This means that the WLAN
function can be enabled without having use a wired con-
nection to open the user interface.
Do Not Disturb
You can enable a Do Not Disturb function for any tele-
phone connected to FRITZ!Box in the user interface. When
Do Not Disturb is enabled, the telephone will not ring. In
configuring this function you can choose between en-
abling the function immediately and selecting a specific
time period.
Immediately When Do Not Disturb is enabled immediately, no incoming
calls will be signaled at the specified extension. The Do
Not Disturb setting will remain enabled until it is disabled.
Period Alternatively, you can enter a Do Not Disturb period during
which the telephone will not ring. At the extension for
which a Do Not Disturb period is to be configured, define
the period during which the phone should not ring and
save your entries. Then enable Do Not Disturb. Do Not Dis-
turb then automatically will be switched on daily at the
time entered in the “Start” field and switched off again at
the time defined in the “End” field.
Example: Do Not Disturb should be configured from 20:00
p.m. until 07:00 a.m. daily. Enter the value “2000” for
<Start> and “0700” for <End>.
Enabling and Disabling WLAN
r96s1s enables the WLAN function
r96s0s disables the WLAN function
Enabling Do Not Disturb Effective Immediately
r81<Ext.>s0s immediately enables Do Not Disturb for
the extension entered as <Ext.>
Alarm
FRITZ!Box Fon WLAN 7113 37
Disabling the
Function
Both kinds of Do Not Disturb settings can be disabled by
means of a keypad sequence.
Alarm
The FRITZ!Box includes an alarm function. The alarm can
be configured individually for each connected telephone.
First enter on the telephone the time at which you would
like to be awakened and save this entry. Then enable the
alarm function.
Example: The telephone should ring at 07:00 a.m. Enter
the value “0700” as the <Time> and save this setting.
Enabling Do Not Disturb for a Prescribed Period
r80<Ext.>s
<Start>s<End>s
defines the period for Do Not Disturb at
extension <Ext.>
r91ss saves the settings
r81<Ext.>s6s enables Do Not Disturb for the defined
period
Disabling Do Not Disturb
r81<Ext.>s6s disables Do Not Disturb for extension
<Ext.>
Configuring the Alarm for a Telephone
r881s<time>s
<Ext.>s
defines for the extension <Ext.> the
time at which the telephone should
ring
r91ss saves the settings
Enabling/disabling the Alarm Function
r881ss enables the alarm function for all ex-
tensions on which a time was set
r881r disables the alarm function for all ex-
tensions
FRITZ!Box Fon WLAN 7113 38
Call Waiting
Call Waiting
Call waiting can be switched on or off for each extension.
Some older terminal equipment connected to extensions
may misinterpret the call waiting signal. This is especially
true of fax machines and modems. If communication er-
rors occur, you should disable call waiting for fax and mo-
dem extensions.
See section “Waiting Calls” on page 44 for information
about how to accept a call while another connection is ac-
tive.
When Call Waiting is enabled, modem and fax connec-
tions may be interrupted.
Enabling Call Waiting
N Pick up the handset.
r2 <Ext.> s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing the
sequence shown at left.
O Hang up the handset.
Disabling Call Waiting
N Pick up the handset.
r2 <Ext.> s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing the
sequence shown at left.
O Hang up the handset.
Suppressing Caller ID for Outgoing Calls (CLIR)
FRITZ!Box Fon WLAN 7113 39
Suppressing Caller ID for Outgoing Calls (CLIR)
The CLIR (Calling Line Identification Restriction) function
prevents your telephone number being displayed on the
other party’s phone during outgoing calls.
The CLIR function is disabled in the factory settings. You
have the option of enabling this function permanently and
then disabling it again. CLIR can also be used for
individual connections. When CLIR is permanently en-
abled, this setting is saved for the extension and always
enabled for outgoing connections.
If you would like to conduct only certain calls with the Call-
er ID suppressed, prefix the number dialed with a keypad
sequence. This enables CLIR only for the current connec-
tion.
Enabling CLIR Permanently
N Pick up the handset.
r51<Ext.>s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dial-
ing the sequence shown at left.
O Hang up the handset.
Disabling CLIR Permanently
N Pick up the handset.
r51<Ext.>s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dial-
ing the sequence shown at left.
O Hang up the handset.
CLIR on a Case-by-Case Basis
N Pick up the handset.
s31r Dial the sequence shown at left. Now
you hear the external dial tone.
M Dial the number you want to call.
FRITZ!Box Fon WLAN 7113 40
Displaying the Incoming Caller ID (CLIP)
Displaying the Incoming Caller ID (CLIP)
The CLIP (Calling Line Identification Presentation) function
makes the number of callers –external and internal– visi-
ble on your telephone display.
The CLIP function is enabled in the factory settings. This
function can be permanently disabled and enabled again.
Disabling Automatic Outside Dialing
The FRITZ!Box offers the possibility of disabling automatic
outside dialing. This means that you will receive an inter-
nal dialing tone when you lift the handset at the corre-
sponding extension. This makes sense at any extension
which is used to make many internal calls, for instance,
between the extensions of the FRITZ!Box. When automatic
outside dialing is disabled, for an external call the 0
must be dialed before the telephone number.
This feature is only effective if your telephone supports
CLIP.
Enabling Display of Incoming Caller ID (CLIP)
N Pick up the handset.
r50<Ext.>s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing
the sequence shown at left.
O Hang up the handset.
Disabling Display of Incoming Caller ID (CLIP)
N Pick up the handset.
r50<Ext.>s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing
the sequence shown at left.
O Hang up the handset.
Call Rejection on Busy (Busy on Busy)
FRITZ!Box Fon WLAN 7113 41
Call Rejection on Busy (Busy on Busy)
Calls for an extension can be rejected using the “Busy on
Busy” feature. This means that the user receives a busy
signal whenever the extension is busy.
Disabling Automatic Outside Dialing
N Pick up the handset.
r1<Ext.>s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing
the sequence shown at left.
O Hang up the handset.
Enabling Automatic Outside Dialing
N Pick up the handset.
r1<Ext.>s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing
the sequence shown at left.
O Hang up the handset.
Enabling Busy on Busy
N Pick up the handset.
r52<Ext.>s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing
the sequence shown at left.
O Hang up the handset.
Disabling Busy on Busy
N Pick up the handset.
r52<Ext.>s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing
the sequence shown at left.
O Hang up the handset.
FRITZ!Box Fon WLAN 7113 42
Operation at the Telephone
7.4 Operation at the Telephone
This section describes how you can use the FRITZ!Box fea-
tures via your telephone keypad.
Shortening the Dialing Procedure
The FRITZ!Box automatically recognizes when a number
has been entered, but not until a few seconds after the fi-
nal digits are entered.
You have the possibility of shortening the dialing proce-
dure by closing your entry with the r key.
Selecting the Outgoing Number and the Type of
Connection
For outgoing connections you can specify the kind of con-
nection to be used for the next dialing procedure. For this
entry you can use settings already made, or circumvent
the settings currently configured. In this case the dialing
rules are suspended for the given dialing procedure.
By entering precisely which Internet telephony account
should be used it is possible to have the dialing proce-
dure conducted via a certain Internet telephone number,
even though this number was never previously configured
for the extension used.
Shortening the Dialing Procedure
<number> r indicates that a number has been dialed
to shorten the dialing procedure
Making Internal Calls
FRITZ!Box Fon WLAN 7113 43
Making Internal Calls
All calls conducted between telephones connected to the
FRITZ!Box, be they analog or ISDN/DECT phones, are inter-
nal telephone calls. These calls are free of charge.
Selecting the Outgoing Number and the Type of Connection
s111r
<Phone number>
dials up this connection using the fixed line
s12r
<Phone number>
establishes a connection for this dialing pro-
cedure using the first Internet telephone
number
s12<P>r establishes an Internet telephony connec-
tion via the specified Internet telephone
number. For <P> enter the position of the In-
ternet telephone number in the List of Inter-
net Telephone Numbers.
Dialing Internal Calls with Automatic Outside Dialing
N Pick up the handset. You can hear the exter-
nal dial tone immediately, since the exten-
sion is set for automatic outside dialing.
ss<Ext.> If you would like to make an internal call to
one of the extensions, dial ss, followed by
the number of the extension, for instance 1
or 2.
Dialing Internal Calls without Automatic Outside Dialing
N Pick up the handset. You hear the internal di-
al tone.
<Ext.> Dial the desired extension number. for in-
stance 1 or 2.
FRITZ!Box Fon WLAN 7113 44
Group Call
Group Call
Place a group call to call all other extensions at the same
time. Your call is connected with whichever extension an-
swers first.
Picking up a Call from the Answering Machine
Use this function to pick up incoming calls on your tele-
phone that already have been taken by the answering ma-
chine.
Waiting Calls
When the “Call Waiting” feature is enabled and you are con-
ducting a call, you will be notified as soon as an external call
arrives on your your line. This call will be signaled by an
acoustic signal in the handset. You can accept the connec-
tion with the new caller within 30 seconds. If you ignore the
signal, the waiting call is rejected after 30 seconds.
For instructions on how to turn the Call Waiting function
on and off, see the section “Call Waiting” on page 38.
Group Call
N Pick up the handset.
ss9 Dial the keypad sequences listed here to call all
free extensions.
Picking up a Call
N Pick up the handset.
s09 Dial the sequence shown at left.
P The call is now connected to your extension. You
are now connected to the caller.
Alternating Between Calls
FRITZ!Box Fon WLAN 7113 45
Alternating Between Calls
Whenever you have one active connection and one caller
on hold, you can switch from one call to the other as often
as you want using the Hold button.
Accepting or Rejecting Waiting Calls
R2 To accept a waiting call, dial the sequence
shown at left. Your original call is now on hold.
R1 To return to your original connection, dial the se-
quence shown at left. You can also accept the
waiting call by hanging up your existing connec-
tion, i.e., by hanging up the handset. In this case
the phone rings as soon as you have hung up.
Pick up the handset again to accept the waiting
call.
R0 To reject a waiting call, dial the sequence shown
at left.
Alternating between Calls
Call 1
P
You are talking to Caller 1.
R Press the Hold button. Caller 1 is now on hold.
M To establish a second call, simply dial ss plus
the desired extension number for an internal
call, or the desired external number.
Call 2
P
If the call is answered, you can consult on this
line. The original caller is still on hold.
R2 To switch back from Caller 2 to Caller 1, dial the
sequence shown at left.
Call 1
P
Caller 1 is now active again and Caller 2 is on
hold.
R2 To switch back again from Caler 2 to Caller 1,
dial the same sequence. In this way you can al-
ternate between the two connections.
FRITZ!Box Fon WLAN 7113 46
Three-Party Conference Call
Three-Party Conference Call
FRITZ!Box allows you to hold telephone conferences with
two other people at once. Two external and one internal
party, or two internal and one external party can conduct a
conference call with each other.
Ending Hold
O The caller on hold hangs up. You can continue
talking on the active connection.
R1 You end the active connection by dialing the se-
quence shown at left and return to the conversa-
tion with Caller 1.
O
K
Call
P
You can also return to the call on hold by hang-
ing up the handset: this ends the currently ac-
tive connection. In this case the phone rings as
soon as you hang up. Pick up the handset again
to return to the last call that was on hold.
Three-Party Conference Call
FRITZ!Box Fon WLAN 7113 47
Conducting a Three-Party Conference Call
N Pick up the handset.
M Dial the external number of the first party. Talk.
R Press the Hold button.
M To establish a second call, simply dial ss plus
the desired extension number for an internal
call, or the desired external number.
You can now conduct a second conversation
while your first call is on hold.
R3 Dial the sequence shown at left to begin a three-
party conference call.
D Now all three participants can confer together. If
either of the other two parties hangs up, your
connection with the remaining participant re-
mains active.
O You can end the three-party call by hanging up
the handset.
R2 You can also switch from the three-party call
back to the original two-party connection. Dial
the sequence shown at left. This ends the three-
party conference. The connection that was active
last before you initiated the three-party confer-
ence is now active again. The other call is on
hold. You can alternate between the two connec-
tions by dialing the same sequence again.
FRITZ!Box Fon WLAN 7113 48
Consultation / Hold
Consultation / Hold
The Consultation/Hold feature allows you to place an ex-
isting call on hold. You then may consult with someone
else at your workplace or dial a second call. The party on
hold does not hear the second conversation. Once you
have finished the consultation, you can return to the origi-
nal connection.
Consultation / Hold
Call 1
P
You are talking to Caller 1.
R Press the Hold button. Caller 1 is now on
hold and you can consult someone else.
M To establish a second call, simply dial
ss plus the desired extension number
for an internal call, or the desired external
number.
Call 2
P
If the call is answered, you can consult on
this line. The original caller is still on hold.
R If the number you dialed is busy or the call
is not answered, press the Hold button
again to return to Caller 1.
R1 To switch back to Caller 1 after talking on
the second connection, dial the sequence
shown at left. Caller 1 is now active again.
If you return to Caller 1 by pressing the Hold button, the
connection to Caller 2 is not cleared down until Caller 2
hangs up.
Ending Consultation
Call 1
P
You can also return to Caller 1 by hanging up
the handset: this ends the connection to
Caller 2. In this case, your telephone rings as
soon as you hang up. Pick up the handset to
return to Caller 1 again.
O Hang up the handset to end the connection.
Transferring Calls
FRITZ!Box Fon WLAN 7113 49
Transferring Calls
The “Call Transfer” function allows you to transfer a con-
nection from one of FRITZ!Box’s extension to another.
Explicit Call Transfer (ECT)
Use the “Explicit Call Transfer” function to connect two ex-
ternal parties with each other while one connection is ac-
tive and the other is on hold. Then you can end your own
connection while the other two parties continue their con-
versation.
Transferring Calls
Call 1
P
You are talking to Caller 1.
R Press the Hold button. Caller 1 is now on
hold.
ss<Ext.> To establish a connection to Caller 2, dial the
star key twice and then her or his extension
number.
Call 2
P
You can now talk with the other Caller 2.
O To transfer the Caller 1 to Caller 2, simply
hang up the handset.
Explicit Transfer of One Active and One Held Connection
N Pick up the handset.
M Dial the external number of the first party. Talk.
R Press the Hold button.
M Dial the number for your second external call. You
can now conduct a second conversation while your
first call is on hold.
FRITZ!Box Fon WLAN 7113 50
Explicit Call Transfer (ECT)
To clear your connection while allowing the external
parties to continue the call, connect the parties with
each other.
R4 Dial the sequence shown at left. The connection on
hold and the active connection are connected with
each other. The external parties continue the call
while you clear the connection.
O Hang up the handset.
Explicit Call Transfer from a Three-party Conference Call
N Pick up the handset.
M Dial the external number of the first party. Talk.
R Press the Hold button.
M Dial the number for your second external call. You
can now conduct a second conversation while your
first call is on hold.
R3 Dial the sequence shown at left to begin a three-par-
ty conference call.
D Now all three participants can confer together. If eit-
her of the other two parties hangs up, your connec-
tion with the remaining participant remains active.
To clear your connections while allowing the exter-
nal parties to continue the call, connect the parties
with each other.
R2 You can also switch from the three-party call back to
the original two-party connection. Dial the sequence
shown at left. This ends the three-party conference.
The connection that was active last before you initi-
ated the three-party conference is now active again.
The second external call is on hold. You can alter-
nate between the two connections by dialing the
same sequence again.
R4 Dial the sequence shown at left. The connection on
hold and the active connection are connected with
each other. The external parties continue the call
while you clear the connection.
O Hang up the handset.
Explicit Transfer of One Active and One Held Connection
Room Monitoring (Baby Monitor)
FRITZ!Box Fon WLAN 7113 51
Room Monitoring (Baby Monitor)
The following key combination enables the function for
monitoring the sound level in a room. First enter the vol-
ume level (a value between 1 and 8). Enter a telephone
number. Do not hang up the handset! When the volume in
the room reaches the specified level, the number you en-
tered will be dialed. When the telephone rings and you
pick up the handset, you will be connected with the tele-
phone on which you enabled the room monitoring func-
tion.
Dial the number of the extension to listen in at an exten-
sion with room monitoring activated.
After initiating a room monitoring phone call, the PBX can-
not generate a new call until at least one minute has
lapsed.
You can disable the function by simply hanging up the
handset of the telephone at which you enabled it.
When using this feature, it is advisable to activate the
speaker phone function.
Enabling Room Monitoring
N Pick up the handset or activate the speaker
phone function of your telephone.
s4
<level>
s
<number>
r
Dial the sequence shown at left. For <Level>,
enter a number between 1 (the most sensi-
tive sound level) and 8. For <Number>, enter
the number to be called. This may be the
number of another internal extension, a 9
for an internal group call, or any external
number desired.
Q Wait for the acknowledgement tone. The ba-
by monitoring phone function is now en-
abled.
Do not hang up the handset!
FRITZ!Box Fon WLAN 7113 52
Using Keypad Messages
Using Keypad Messages
The Keypad function allows you to control services and
features on the telephone line by entering characters and
strings on the telephone keypad.
These keyboard entries are called keypad messages. Ask
your telephone carrier for the specific keypad messages to
access ISDN features.
Entering Keypad Sequences on an Extension with Automatic
Outside Dialing
N Pick up the handset.
sr<Seq> Dial the sequence shown at left. <Seq> stands for
the keypad sequence you received from your
telephone carrier.
Entering Keypad Sequences on an Extension without
Automatic Outside Dialing
N Pick up the handset.
0sr<Seq> Dial the sequence shown at left. <Seq> stands for
the keypad sequence you received from your
telephone carrier.
Troubleshooting
FRITZ!Box Fon WLAN 7113 53
8 Troubleshooting
Help for Errors
This chapter provides concrete assistance if you are not able to open
the user interface of your FRITZ!Box, if you are having problems with the
WLAN connection, or if you want to change the IP settings on your com-
puter.
8.1 Errors Opening the User Interface
If an error message is returned when you open the user in-
terface, this can have various causes. Check the possible
causes and attempt to resolve the error.
Restarting the FRITZ!Box
The user interface cannot be opened or does not react.
Inconsistencies within the FRITZ!Box.
1. Restart the FRITZ!Box.
Remove the power cable from the socket.
2. Wait about five seconds before reconnecting to the
power supply.
3. Try again to open the FRITZ!Box user interface by en-
tering fritz.box
in the address field.
Possible Cause
Remedy
FRITZ!Box Fon WLAN 7113 54
Checking the Cable Connections
Checking the Cable Connections
The user interface of the FRITZ!Box does not appear in the
window of your web browser.
The cable connections are not secure.
Make sure that all cable connections are plugged in se-
curely.
Checking Name Resolution
The user interface of the FRITZ!Box cannot be opened by
entering fritz.box.
The name resolution of the FRITZ!Box does not work.
1. In the web browser, enter the following IP address in
place of fritz.box
:
192.168.178.1
2. If the user interface cannot be reached via this ad-
dress, check the settings configured for your network
adapter as described in section “Obtaining an IP Ad-
dress Automatically” from page 64.
Possible Cause
Remedy
Possible Cause
Remedy
Checking the IP Address
FRITZ!Box Fon WLAN 7113 55
Checking the IP Address
The user interface of the FRITZ!Box cannot be reached at
the address fritz.box
nor at 192.168.178.1.
The IP address set on the connected computer is inappli-
cable.
Set the network adapter to DHCP so that the IP address
can be obtained via the DHCP server of the FRITZ!Box. Ad-
just the settings to those described in the section “Ob-
taining an IP Address Automatically” from page 64.
Disabling Dial-Up Connections
The user interface is not opened; a window for a dial-up
connection appears instead.
The browser must use the network connection between
the computer and FRITZ!Box when the user interface is
opened. For this the automatic establishment of a Dial-Up
Networking connection must be disabled.
You can disable the automatic attempt to establish a Dial-
Up Networking connection. The following example ex-
plains how to check the settings of Internet Explorer 6:
1. Select the “Connections” settings page under “Tools
/ Internet Options...”.
2. In the “Dial-up and Virtual Private Network settings”
section, enable the option “Never dial a connection”.
3. As a final step, click “OK”.
Possible Cause
Remedy
Possible Cause
Remedy
FRITZ!Box Fon WLAN 7113 56
Disabling Online Operation
Disabling Online Operation
The user interface does not appear in the window of your
web browser.
The web browser is set for offline operation.
Configure the web browser for online operation. Using the
example of Internet Explorer 6:
1. Open the “File” menu.
2. If a checkmark is displayed in front of “Work Offline”,
click this line.
The checkmark will be removed and Internet Explorer will
switch to online operation.
Checking the Proxy Settings
The user interface does not appear in the window of your
web browser.
The proxy settings of the web browser prevent the user in-
terface from being opened.
Enter the DNS name and the IP address of the FRITZ!Box as
an exception in the proxy settings of the web browser.
1. Select the “Connections” settings page under
“Tools / Internet Options...”.
2. Click the “LAN Settings...” button in the “Local Area
Network (LAN) settings” area, and in the next win-
dow, click the “Advanced...” button in the “Proxy
server” area.
3. Under “Exceptions” enter: “fritz.box
; 192.168.178.1;
169.254.1.1” and click “OK”.
Possible Cause
Remedy
Possible Cause
Remedy
Checking the CGI Settings
FRITZ!Box Fon WLAN 7113 57
Checking the CGI Settings
The user interface does not appear in the window of your
web browser.
The execution of CGI scripts is disabled in the web brows-
er.
Configure the web browser so that the execution of scripts
is allowed in the user interface. Using the example of the
Internet Explorer 6:
1. Select “Tools / Internet Options... / Security”.
2. If the “Default Level” button is not available for selec-
tion, the “Medium” security level is already config-
ured, which means that CGI scripts can be executed
in the Internet browser.
3. Proceed as follows if the “Default Level” button is
available for selection:
4. Select the “Local Intranet” icon and click the “Si-
tes...” button.
5. In the next window, click the “Advanced...” button
and enter in the “Add this Web site to the zone:”
field:
fritz.box
6. Disable the option “Require server verification
(https:) for all sites in this zone”.
Possible Cause
Remedy
FRITZ!Box Fon WLAN 7113 58
Checking the Security Software
Checking the Security Software
The user interface cannot be displayed in the web
browser.
Security software is blocking access to the user interface.
Security software like firewalls can prevent access to the
user interface of the FRITZ!Box. Configure exceptions for
the FRITZ!Box in all of the enabled security software.
Opening the User Interface of the FRITZ!Box
The FRITZ!Box is equipped with a fixed IP address that
cannot be changed. FRITZ!Box always can be reached at
this IP address. This fixed IP address is:
Proceed as follows to open the FRITZ!Box user interface
using this IP address:
1. Connect the FRITZ!Box to the computer using the net-
work cable (yellow). See the section “Connecting
Computers to the LAN Port” from page 15 for more in-
formation.
2. Make sure that the computer obtains its IP address
automatically. You can check this setting in the com-
puter’s IP settings (see section “Obtaining an IP Ad-
dress Automatically” from page 64).
3. Restart your computer.
Possible Cause
Remedy
If you would like to exit security software to test access to
the FRITZ!Box, remove the DSL cable first! After testing,
first start the security software before reinserting the DSL
cable and connecting to the Internet!
Fixed IP Address 169.254.1.1
The WLAN Adapter Cannot Find FRITZ!Box
FRITZ!Box Fon WLAN 7113 59
4. Start your Internet browser and enter FRITZ!Box's
fixed IP address:
169.254.1.1
The FRITZ!Box user interface opens.
8.2 The WLAN Adapter Cannot Find FRITZ!Box
If the “FRITZ!Box Fon WLAN 7113” radio network is not
found by the WLAN adapter of a computer, work through
the following steps to find the source of the error and re-
solve it.
Enabling the WLAN Adapter
The WLAN adapter cannot find a wireless network.
The WLAN adapter is not ready for operation.
Make sure that the WLAN adapter is ready for operation.
Some of the WLAN adapters installed in notebooks must
be activated by flipping a switch on the notebook.
Once you have reached the FRITZ!Box user interface
again, you should check the FRITZ!Box settings and cor-
rect them if necessary.
Possible Cause
Remedy
For questions on the WLAN adapter of your computer,
please contact the manufacturer.
FRITZ!Box Fon WLAN 7113 60
Enabling WLAN
Enabling WLAN
The wireless network of the FRITZ!Box is not found by the
WLAN adapter.
WLAN is not enabled in the FRITZ!Box. If the “WLAN” LED
on the FRITZ!Box is not lit up or is flashing, this means that
WLAN is not enabled.
Press the WLAN switch on the FRITZ!Box. The “WLAN” LED
begins flashing and then lights constantly. This means
that the WLAN function is enabled.
Announcing the Name of the Radio Network
The WLAN Adapter cannot find the wireless network of the
FRITZ!Box.
The name of the wireless network of the FRITZ!Box is con-
cealed.
Enable the setting “Announce name of the radio network
(SSID)” is enabled in the WLAN settings of the FRITZ!Box.
1. Connect the FRITZ!Box to a computer using a network
cable. Proceed as described in the section “Connect-
ing Computers to the LAN Port” on page 15.
2. Start a web browser.
3. Enter fritz.box
in the address field.
4. Select the “Settings” menu.
5. Select the “Advanced Settings / WLAN / Radio Set-
tings” menu and enable the setting “Announce name
of the radio network (SSID)”.
Possible Cause
Remedy
Possible Cause
Remedy
WLAN Connection Is Not Established
FRITZ!Box Fon WLAN 7113 61
6. Click the “Apply” button.
7. Remove the network cable and try again to establish
a connection via WLAN.
8.3 WLAN Connection Is Not Established
Comparing the Security Settings for WLAN
Make sure that the WLAN security settings registered in
the FRITZ!Box agree with the security settings of the WLAN
adapter.
Here is how to view the WLAN security settings of the
FRITZ!Box and print them out.
1. Connect the FRITZ!Box to a computer using a network
cable. Proceed as described in the section “Connect-
ing Computers to the LAN Port” from page 15.
2. Start a web browser.
3. Enter fritz.box
in the address field.
4. Select the “Settings” menu.
5. Select the “Advanced Settings / WLAN / Security”
menu.
6. Click the “Apply” button.
A window is displayed with the WLAN security
settings. Print out this page by clicking the “Print
Page” button at the upper left of the page.
7. Remove the network cable and check the configura-
tion of the WLAN adapter in the printout. Try again to
establish a connection.
FRITZ!Box Fon WLAN 7113 62
Testing the WLAN Connection Without Security Settings
Testing the WLAN Connection Without Security
Settings
Disable the WLAN security settings to test whether a WLAN
connection between the FRITZ!Box and the WLAN adapter
is possible at all.
1. Connect the FRITZ!Box to a computer using a network
cable. Proceed as described in the section “Connect-
ing Computers to the LAN Port” from page 15.
2. Open the user interface in a web browser. Proceed as
described in the section “Opening the User Inter-
face” on page 23.
3. In the “Advanced Settings / WLAN / Security” menu
and select “Enable Access without Encryption”. As a
final step, click “Apply”.
4. Remove the network cable and try again to establish
a connection.
If the attempt to connect to the WLAN using the non-en-
crypted connection is not successful either, check the in-
stallation of the WLAN adapter and contact the manufac-
turer of the WLAN adapter if necessary.
Enable WLAN encryption again after completing the tests.
Follow the steps listed above and then enable the kind of
encryption that was previously configured.
This non-secured condition should be used only for
testing, to find out whether a WLAN connection is
possible at all.
Installing the Patch for WPA2 with Microsoft WLAN Service
FRITZ!Box Fon WLAN 7113 63
Installing the Patch for WPA2 with Microsoft WLAN
Service
The WLAN connection to FRITZ!Box cannot be established
using the Microsoft WLAN Service (WZC) in Windows XP
with Service Pack 2.
The required Microsoft patch for WPA2 (IEEE 802.11i) may
not be not installed.
Support for WPA2 in Microsoft WLAN service was not avail-
able until the current patch for Windows XP with Service
Pack 2. Install the current patch from Microsoft:
support.microsoft.com/kb/917021/EN-US
Alternatively, you can install Service Pack 3 instead.
Ruling Out Interference Cause by Other Wireless
Networks
If there are other devices in the immediate vicinity of your
FRITZ!Box that use the 2.4-GHz band, simultaneous use of
frequencies can result in mutual interference (for exam-
ple, fluctuations or interrupted connections). Disruptions
can also be caused by other WLAN access points, or by
Bluetooth devices, garage door openers or wireless AV
bridges. In this case, please test a different radio channel
for your FRITZ!Box.
1. Connect the FRITZ!Box to a computer using a network
cable. Proceed as described in the section “Connect-
ing Computers to the LAN Port” from page 15.
2. Start a web browser.
3. Enter fritz.box
in the address field.
4. Select the “Settings” menu.
5. Open the “Advanced Settings / WLAN / Radio Set-
tings” menu.
Possible Cause
Remedy
FRITZ!Box Fon WLAN 7113 64
Obtaining an IP Address Automatically
6. Select a different radio channel from the “Select ra-
dio channel” list.
7. Click the “Apply” button.
8. Remove the network cable and check whether inter-
ference continues to occur.
8.4 Obtaining an IP Address Automatically
The FRITZ!Box is equipped with its own DHCP server. This
means that the connected computers obtain their IP ad-
dresses from the FRITZ!Box. The connected computers
must be configured such that they can receive their IP ad-
dresses automatically. The steps for checking and adjust-
ing this option differ among the operating systems. See
the relevant section for your operating system.
Obtaining an IP Address Automatically in
Windows Vista
1. Click the “Start” button in the task bar and select
“Control Panel / Network and Sharing Center”.
2. From the “Tasks”, select “Manage network connec-
tions”.
3. In the “LAN or High-Speed Internet” area, select the
LAN connection between your computer and the
FRITZ!Box. Click the right mouse button and select
“Properties”.
4. If the “User Account Control” window is displayed,
click “Continue” in this window.
5. Under “This connection uses the following items”,
select the “Internet Protocol Version 4 (TCP/IPv4)”
entry and click “Properties”.
6. Enable the options “Obtain an IP address automatical-
ly” and “Obtain DNS server address automatically”.
If FRITZ!Box is operated in a network, no other DHCP serv-
er may be activated in this network. If you need to operate
a DHCP server, please disable the DHCP feature in the
“Advanced System Settings”.
Obtaining an IP Address Automatically in Windows XP
FRITZ!Box Fon WLAN 7113 65
Properties of the Internet protocol (TCP/IP)
7. Confirm your selection by clicking “OK”.
If necessary, repeat steps 5 through 7 for the
“Internet Protocol Version 6 (TCP/IPv6)” as well.
The computer now receives an IP address from the
FRITZ!Box.
Obtaining an IP Address Automatically in
Windows XP
1. Go to “start / Control Panel / Network and Internet
Connections / Network Connections” and double-
click the LAN connection icon of the network adapter
connected to the FRITZ!Box.
2. Click the “Properties” button.
3. Select “Internet Protocol (TCP/IP)” in the list of items
used in this network connection and click “Properties”.
4. Enable the options “Obtain an IP address automatical-
ly” and “Obtain DNS server address automatically”.
FRITZ!Box Fon WLAN 7113 66
Obtaining an IP Address Automatically in Windows 2000
Properties of the Internet protocol (TCP/IP)
5. Confirm your selection by clicking “OK”.
The computer now receives an IP address from the
FRITZ!Box.
Obtaining an IP Address Automatically in
Windows 2000
1. Select “Start / Settings / Control Panel / Network and
Dial-up Connections”.
2. Double-click to select the Local Area Network con-
nection of the network adapter bound to the
FRITZ!Box.
3. Click the “Properties” button.
4. Double-click to select “Internet Protocol (TCP/IP)” in
the list of network components.
Obtaining an IP Address Automatically in Windows 2000
FRITZ!Box Fon WLAN 7113 67
Properties of the LAN connection of a network adapter
5. Enable the options “Obtain an IP address automatical-
ly” and “Obtain DNS server address automatically”.
Properties of the Internet protocol (TCP/IP)
6. Confirm your selection by clicking “OK”.
The computer now receives an IP address from the
FRITZ!Box.
FRITZ!Box Fon WLAN 7113 68
Obtaining an IP Address Automatically in Mac OS X
Obtaining an IP Address Automatically in Mac OS X
1. Select the “System Preferences” in the Apple menu.
2. In the “System Preferences” window, click the “Net-
work” icon.
3. In the “Network” window, select the “Built-in Ether-
net” entry from the “Show:” drop-down menu.
4. Switch to the “TCP/IP” settings page and select the
“Using DHCP:” option from the “Configure IPv4”
drop-down menu.
5. Click “Apply Now”.
The computer now receives an IP address from the FRITZ!Box.
Obtaining an IP Address Automatically in Linux
For comprehensive information and tips on the topic of
network settings in Linux, see, for example:
http://www.tldp.org/HOWTO/NET3-4-HOWTO-5.html
Uninstalling the FRITZ!Box
FRITZ!Box Fon WLAN 7113 69
9 Uninstalling the FRITZ!Box
Removing Program Entries
This chapter describes how to remove the FRITZ!Box from the computer
and uninstall the corresponding software.
Disconnecting the FRITZ!Box from the Computer
LAN Port If the computer is connected to one of the LAN ports on
the FRITZ!Box, simply remove the network cable.
If the computer is connected to the FRITZ!Box via a net-
work hub or switch, remove the network cable between
the FRITZ!Box and the network hub or switch.
WLAN If the computer is connected to the FRITZ!Box wirelessly
via WLAN, deactivate the WLAN connection to the
FRITZ!Box in the software of the WLAN adapter or the
WLAN module.
FRITZ!Box Fon WLAN 7113 70
Product Details
II PRODUCT DETAILS AND USEFUL INFORMATION
1Product Details
FRITZ!Box Fon WLAN 7113
This chapter provides you with product details on FRITZ!Box Fon
WLAN 7113. You receive information on the LEDs, the audible signals,
cables and adapters, technical data and further details.
1.1 Cable
See the information in the following section on the indi-
vidual cables and sockets on the FRITZ!Box Fon
WLAN 7113.
DSL/Telephone Cable
The DSL/telephone cable is a special combined cable de-
veloped by AVM to connect the FRITZ!Box Fon WLAN 7113
to the DSL splitter and the ISDN NT or analog telephone
line.
If you need a longer cable, you can extend one or multiple
ends of the combined cable using RJ45 double couplings.
Which ends of the cable you extend depends on the spa-
tial conditions at your location.
You will need the following components to extend the
length of one or more ends of your DSL/telephone cable:
1 standard network cable
1 standard RJ45 CAT5 double coupling
Both components are available from specialized vendors.
If you need to extend the cable by splicing a standard net-
work cable, AVM recommends a final length of no more
than 10 meters.
Remember that the quality of the line may be decrease as
the distance from the central switching station increases.
Network Cable
FRITZ!Box Fon WLAN 7113 71
Network Cable
The FRITZ!Box Fon WLAN 7113 network cable is a standard
Ethernet cable. If you need a replacement cable, a longer
cable or an extension, use a standard STP-type (Shielded
Twisted Pair, 1:1) CAT5 Ethernet cable. To extend the cable
you will also need a standard CAT5 double coupling link to
RJ45. You can use either straight cable or cross-link cable.
All components are available from specialized vendors.
AVM recommends using a network cable no more than
100 meters long.
Additional network cable is required if you would like to
use the FRITZ!Box Fon WLAN 7113 network port.
FRITZ!Box Fon WLAN 7113 72
LEDs
1.2 LEDs
Five LEDs are built into the top of the FRITZ!Box Fon
WLAN 7113, which flash or light up to display various con-
nection statuses.
1.3 WLAN Button
The FRITZ!Box is equipped with a WLAN switch on its rear
panel.
The WLAN button can be used to enable and disable
WLAN.
LED Status Meaning
Power/DSL lights up
FRITZ!Box on standby
the device has electrical power and the DSL line is
ready for operation
flashes the device has electrical power
the connection to DSL is being established or has
been interrupted
Internet lights up a telephone connection to the Internet is active
flashes there are messages in your mailbox (this function must
be supported by your telephony carrier)
Fixed Line lights up a telephone connection via the telephone line is active
flashes there are messages in your mailbox (this function must
be supported by your telephony carrier)
WLAN lights up the WLAN function is enabled
flashes the WLAN function is being enabled or disabled
INFO lights up
a telephone connection between two Internet
telephony subscribers is active; the call is free of
charge (this function must be supported by your
Internet telephony provider)
signals an event that can be configured freely by the
user
flashes updating the firmware
signals an event that can be configured freely by the
user
Technical Specifications
FRITZ!Box Fon WLAN 7113 73
1.4 Technical Specifications
Ports and Interfaces
DSL/Telephone port
– DSL modem in accordance with the standard
ITU G.992.1 Annex A, ITU G.992.3 Annex A
(ADSL2), ITU G.992.5 Annex A (ADSL2+),
ITU G.994.1 (G.hs)
– telephone port for connecting to the analog
network
two a/b ports for connecting two extensions via RJ11
sockets
one LAN port over RJ45 socket(standard Ethernet,
10/100 base-T)
WLAN
WLAN access point with support for radio networks in
accordance with IEEE 802.11b (11 Mbit/s) and
IEEE 802.11g (54 Mbit/s). The IEEE 802.11g++ stan-
dard is also supported and can be used when a com-
patible WLAN adapter is installed.
Router Function
DSL router
DHCP server
Firewall with IP masquerading/NAT
User Interface and Display
Settings and status messages via a web browser on a
connected computer
Five LEDs indicate the condition of the device
FRITZ!Box Fon WLAN 7113 74
Physical Specifications
Physical Specifications
Dimensions (w x h x d) approx. 123 x 125 x 31 mm
Supply voltage: 230 V / 50 Hz
Maximum power consumption: 8.5 W
Average power consumption: 5-7 W
Firmware can be updated
Conform to CE standards
Ambient conditions
– Operating temperature: 0° C – +40° C
– Storage temperature: -20° C – +70° C
– relative humidity (operation): 10 % – 90 %
– relative humidity (idle): 5 % – 95 %
Declaration of CE Conformity
FRITZ!Box Fon WLAN 7113 75
1.5 Declaration of CE Conformity
The
manufacturer
AVM GmbH
Alt-Moabit 95
D-10559 Berlin
herewith declares that the product
FRITZ!Box Fon WLAN 7113
Type: ADSL-WLAN Router
complies with the following directives:
1999/5/EC R&TTE Directive: Radio Equipment and
Telecommunications Terminal Equipment
2004/108/EC EMC Directive: Electromagnetic Compatibility
73/23/EEC Low Voltage Directive:Electrical equipment designed
for use within certain voltage limits
2005/32/EC EU directive: Ecodesign Requirements for Energy-using
Products
The following norms were consulted to assess conformity:
- EN 60950-1:2006
- CTR 3/1998.06.17
- ITU-T G.992.1
- ITU-T G.992.2
- ITU-T G.992.3
- ITU-T G.992.4
- ITU-T G.992.5
- ITU-T G.994.1
- EN 301 489-1 V1.8.1 (2008)
- EN 301 489-17 V1.3.2 (2008)
- EN 55024/9.98 + A1/10.01 +
A2/01.03
- EN 300 328 V1.6.1 (11.2004)
- ETSI ETR 328 (1996-11)
- ETSI TS 101 388 V1.4.1 (2007-08)
The CE symbol confirms that this product conforms with the above
mentioned norms and regulations.
Berlin, 2009-03-24 Peter Faxel, Technical Director
Indication of Countries
The radio technology of this device is designed for use in all countries
of the European Union and in Switzerland, Norway and Iceland. In
France only indoor operation is permitted.
FRITZ!Box Fon WLAN 7113 76
Disposal
1.6 Disposal
Electrical and electronic equipment must be disposed of
separately from household waste.
Labeling of electrical and electronic scrap
In accordance with European regulations, the FRITZ!Box
Fon WLAN 7113, as well as all devices and electronic com-
ponents contained in the FRITZ!Box Fon WLAN 7113 pack-
age may not be disposed with household waste. Please
bring these to your local collection points for disposal.
More about WLAN
FRITZ!Box Fon WLAN 7113 77
2More about WLAN
WLAN (Wireless Local Area Network) is a radio technology that allows
networks and access to the Internet to be provided without cable con-
nections. This allows multiple users to share one wireless Internet con-
nection.
2.1 Standards
The WLAN standards IEEE 802.11a, IEEE 802.11b,
IEEE 802.11g and IEEE 802.11n (on the basis of the pre-
liminary draft 2.0 of the standard) and IEEE 802.11i were
developed by the Institute of Electrical and Electronic En-
gineers (IEEE).
The standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g
and IEEE 802.11n define the transmission rate within a
wireless LAN. The IEEE 802.11i standard is a security stan-
dard.
Standards for the Throughput Rate
Data Throughput The FRITZ!Box supports your choice of the standards
IEEE 802.11b, IEEE 802.11g and the proprietary standard
IEEE 802.11g++. WLAN adapters based on one or more of
the standards listed can be used for WLAN connections
with the FRITZ!Box.
If you use a FRITZ!WLAN USB Stick from AVM as a WLAN
adapter with the FRITZ!Box, you can also establish WLAN
connections using the IEEE 802.11g++ standard.
The throughputs listed differentiate between gross and
net transmission rates. The net speed describes the trans-
mission rate of the user data.
Connection
type
Gross data throughput
up to
Net data throughput up
to
802.11b 11 Mbit/s 5 Mbit/s
802.11g 54 Mbit/s 25 Mbit/s
802.11g++ 125 Mbit/s 35 Mbit/s
FRITZ!Box Fon WLAN 7113 78
The Standard for Security
Range The range within a WLAN is highly dependent on the fol-
lowing factors:
the WLAN adapter used
the structural conditions
the amount of radio traffic on the same frequency
band. Other WLAN networks, microwave ovens or
Bluetooth transmitters (mobile telephones) may be
active.
IEEE 802.11b With a maximum throughput rate of 11 Mbit/s, this is the
oldest standard for radio networks. Older WLAN adapters
of the first generation can communicate with the
FRITZ!Box using 802.11b. However, if the WLAN adapter
supports newer standards such as 802.11g, the latest
standard should be used.
IEEE 802.11g This is currently the most common WLAN standard. It com-
municates with a maximum of 54 Mbit/s gross in the 2.4-
GHz frequency range (ISM) and guarantees broad compat-
ibility with many WLAN devices.
IEEE 802.11g++ The FRITZ!Box also supports the high-speed mode
802.11g++. The transmission rate within a wireless LAN
can be increased with this extension to as high as
125 Mbit/s gross and 35 Mbit/s net when the remote site
is connected to a WLAN access point compatible with this
mode (an FRITZ!WLAN USB Stick AVM, for example).
The Standard for Security
IEEE 802.11i The WPA2 security mechanism is defined in the
IEEE 802.11i standard. WPA2 is an extension of the famil-
iar security mechanism WPA (Wi-Fi Protected Access).
The main feature of the extension of WPA to WPA2 is the
AES-CCMP encryption process.
Security
FRITZ!Box Fon WLAN 7113 79
FRITZ!Box supports the AES encryption procedure as part of
the WPA2 mechanism, and the TKIP encryption procedure as
part of the WPA mechanism. This means that the FRITZ!Box
can be used in combination with any WLAN adapters that al-
so support WPA2 with AES or WPA with TKIP.
2.2 Security
Security is of utmost importance within radio networks.
Therefore it is important that no unauthorized users can
register in a WLAN to use its Internet access or shared net-
work resources.
FRITZ!Box includes settings on various levels that contrib-
ute to the security of your WLAN and thus to the security of
your computers.
Encryption
The most important security setting is encryption. The
FRITZ!Box supports the security mechanisms WEP (Wired
Equivalent Privacy), WPA (Wi-Fi Protected Access) and
WPA2 as follows:
Mechanism Encryption
WPA TKIP (Temporary Key Integrity Protocol)
WPA2 TKIP
AES-CCMP
based on the extremely secure AES
(Advanced Encryption Standard)
procedure. CCM (Counter with CBC-MAC)
defines how the AES procedure is applied
to WLAN packets.
Radio signals can also be received outside of office or res-
idential spaces and abused for criminal purposes.
FRITZ!Box Fon WLAN 7113 80
Encryption
As part of the WEP mechanism a static key is deter-
mined to serve for the encryption of the user data.
Enter the key in the WLAN Security settings of the
FRITZ!Box. All of the WLAN adapters in your wireless
network must also use this key.
The WPA and WPA2 mechanisms provide for authen-
tication while the connection is being established.
For this a WPA password must be defined.
When WPA is selected, the TKIP encryption method is
used to encrypt the user data. In WPA2 the AES-CCMP
encryption method is used.
The encryption method you configure here must also
be supported by your WLAN adapter.
The user data are encrypted using an automatically
generated key. This key is regenerated at regular in-
tervals.
The WPA password used may be 8 to 63 characters in
length. For increased security, however, the pass-
word should be at least 20 characters long. Use nu-
merals, letters and special characters and combine
capitals and lower-case letters.
Default Setting In the FRITZ!Box a WPA encryption with the TKIP encryption
method is preconfigured.
Recommendation If your WLAN adapter supports an encryption method that
is more secure than the one preconfigured in the
FRITZ!Box, you should select the more secure encryption
method in your FRITZ!Box.
To configure the best security settings possible with
FRITZ!Box and your WLAN adapter, please note the
following recommendations:
It is advisable to change the preconfigured WLAN key as
soon as possible. Changes to the settings can be config-
ured on the FRITZ!Box user interface.
WLAN Radio Network Name (SSID)
FRITZ!Box Fon WLAN 7113 81
If your WLAN adapter supports WPA2 in accordance
with the 802.11i standard:
– Enable WPA encryption.
– Select the WPA mode “WPA2 (CCMP)” or
“WPA+WPA2”.
– Replace the WPA network key with a new, unique
value.
If your WLAN adapter supports the WPA mechanism,
but not the WPA2 mechanism:
– Enable WPA encryption.
– Select the WPA mode “WPA (TKIP)” or
“WPA+WPA2”.
– Replace the WPA network key with a new, unique
value.
If your WLAN adapter supports neither the WPA nor
the WPA2 mechanism:
– Enable WEP encryption.
– Replace the WLAN key with a new, unique value.
WLAN Radio Network Name (SSID)
In the factory settings of FRITZ!Box a value of “FRITZ!Box
Fon WLAN 7113” is preset for the SSID (Service Set Identi-
fier).
We strongly recommend the use of a WLAN adapter that
supports WPA or WPA2 (for instance, the FRITZ!WLAN USB
Stick). WEP is out of date and data encrypted with WEP
can be deciphered within minutes.
If an additional device with the same network name is lo-
cated in the vicinity, it can occur that the WLAN adapter
attempts to register there. Therefore you should change
the SSID as soon as possible.
FRITZ!Box Fon WLAN 7113 82
Frequency Ranges
2.3 Frequency Ranges
WLAN uses the frequency range around 2.4 GHz in the ISM
band or, alternatively, the frequency range at 5 GHz.
You can use both frequency ranges with the FRITZ!Box.
2.4-GHz frequency
Band
In the 2.4-GHz frequency band WLAN works in the same
range as Bluetooth, microwave equipment and various
other devices like radio-controlled toys, garage-door
openers and video bridges. This means that interference
may occur within WLANs operated in the vicinity of such
devices. Generallythis has adverse effects on the trans-
mission rate, including aborted connections.
In the 2.4-GHz frequency range the European regulation
authorities have designated 13 channels for WLAN. One
channel has a bandwidth of 20 MHz.
A channel can have a bandwidth of 20 MHz (throughput
up to 130Mbit/s) or 40MHz (throughput of up to
300 Mbit/s).
Channels located directly next to each other in the 2.4-
GHz band may overlap and result in mutual interference.
For instance, if several WLANs are operated close to each
other in the 2.4-GHz frequency range with a bandwidth of
20 MHz, a distance of at least five channels should be left
empty between each two channels used. This means that
if channel 1 is selected for one WLAN, the channels 6
through 13 can be selected for a second WLAN. This main-
tains the minimum distance between channels.
WLAN Autochannel With the WLAN Autochannel function, the FRITZ!Box auto-
matically searches for the channel subject to the least in-
terference. Should problems with interference persist de-
spite this function, try to identify the source of interfer-
ence and switch it off manually.
Additional tips on interference in the WLAN radio network
are presented in the section “Ruling Out Interference
Cause by Other Wireless Networks” from page 63.
Increasing the WLAN Range Using WDS
FRITZ!Box Fon WLAN 7113 83
Allocation of the WLAN Channels in the 2.4-GHz Range
2.4 Increasing the WLAN Range Using WDS
WDS You can extend the range in your wireless network using
WDS (Wireless Distribution System). For this you need an-
other WLAN access point in addition to the FRITZ!Box. One
of the two WLAN access points works as the base station,
the other as a repeater. The base station and repeater are
connected to each other via WLAN. The base station then
can use the repeater to reach even computers that would
be located beyond its range without the repeater.
WDS: Expanding the WLAN range using a repeater
Please note:
In order to expand the range of your wireless net-
work, you need at least one additional WLAN access
point. The wireless network of your FRITZ!Box can be
expanded to a WDS (Wireless Distribution System)
with up to four WLAN access points.
Channel Frequency (MHz) Channel Frequency (MHz)
1 2412 8 2447
2 2417 9 2452
3 2422 10 2457
4 2427 11 2462
5 2432 12 2467
6 2437 13 2472
7 2442
FRITZ!Box Fon WLAN 7113 84
Increasing the WLAN Range Using WDS
All WLAN access points implemented in the WDS
must support WDS and be configured for this tech-
nology.
All WLAN access points implemented as repeaters in
the WDS must be located within the radio range of
the base station.
The FRITZ!Box can function as a base station to es-
tablish the Internet connection for other repeaters, or
as a repeater to expand the range of a base station.
Make sure that the WDS connections between the
WDS base station and the WDS repeaters are secured
using the same encryption (for instance,
WPA/WPA2). Note that the WPA2 encryption method
is available only when your network consists of AVM
devices.
Make sure that all WLAN access points in the WDS
use the same radio channel.
Every access point participating in the WDS fulfills
the tasks of a WLAN access point for its given WLAN
clients. This means that the WLAN clients see each
WLAN access point with an individual name (SSID)
and individual encryption settings.
If you use the WLAN control software provided in
Windows Vista or by the Windows XP Service Pack 2
on your WLAN clients, you can assign the same SSID
and the same encryption settings to different WLAN
access points. Each client can then automatically
register at the WLAN access point with the best
availability.
Make sure that each IP address is assigned only once
in the wireless network.
FRITZ!Box as a Base Station
FRITZ!Box Fon WLAN 7113 85
FRITZ!Box as a Base Station
The FRITZ!Box can be configured as a base station or as a
repeater:
As a base station, the FRITZ!Box establishes Internet
connections for other WLAN repeaters and WLAN cli-
ents.
As a repeater, the FRITZ!Box extends the range of a
base station in the wireless network.
To set up the FRITZ!Box as a base station, proceed
according to the following directions:
1. Start a web browser.
2. Enter fritz.box
in the address field.
The FRITZ!Box user interface opens.
3. Click on “Settings / Advanced Settings...”.
4. Make sure that the expert mode is enabled in the
“System / Expert Mode” menu.
5. Open the “WLAN / Radio Settings” menu.
6. If the wireless network (WLAN) is not enabled yet, en-
able the setting “Enable WLAN” and then click “Ap-
ply”.
7. Click the “WDS Repeater” menu command.
8. Enable the “Enable support for WLAN repeater (WDS
repeater mode)” setting.
9. Select “Base station” as the operating mode.
10. Select from the list of “Known WLAN Devices” the de-
vices that are to be used as repeaters.
11. In the “Security” area define how the repeater con-
nection should be encrypted.
12. Enter a password.
Please note that the WPA2 encryption method is only
available for AVM AVM devices.
FRITZ!Box Fon WLAN 7113 86
FRITZ!Box as a Repeater
13. Click “Apply”.
The “Repeater Settings” of the FRITZ!Box are dis-
played.
14. We recommend printing out these settings.
This concludes the configuration of the FRITZ!Box as a
base station.
FRITZ!Box as a Repeater
The FRITZ!Box can be configured as a base station or as a
repeater:
As a base station, the FRITZ!Box establishes Internet
connections for other WLAN repeaters and WLAN cli-
ents.
As a repeater, the FRITZ!Box extends the range of a
base station in the wireless network.
To set up the FRITZ!Box as a repeater, proceed as directed
below:
1. Start a web browser.
2. Enter fritz.box
in the address field.
The FRITZ!Box user interface opens.
3. Click on “Settings / Advanced Settings...”.
4. Make sure that the expert mode is enabled in the
“System / Expert Mode” menu.
5. Open the “WLAN / Radio Settings” menu.
6. If the wireless network (WLAN) is not enabled yet, en-
able the setting “Enable WLAN” and then click “Apply”.
7. Click the “WDS Repeater” menu command.
8. Enable the “Enable support for WLAN repeater (WDS
repeater mode)” setting.
Register the FRITZ!Box settings you printed out in each re-
peater operating in your wireless network.
FRITZ!Box as a Repeater
FRITZ!Box Fon WLAN 7113 87
9. Select the “Repeater” option as the operating mode.
10. Select from the “Known WLAN Devices” list the WLAN
device that should be used as the base station.
11. If the FRITZ!Box is to be operated as a repeater, you
must change its IP settings.
– IP address
– Enter here the IP address for this FRITZ!Box, tak-
ing the following into consideration:
– The FRITZ!Box must have a different IP address
than the base station.
– The IP address must be from the IP address range
of the base station.
– The IP address may not come from the address
pool of the DHCP server of the base station.
– Subnet mask
– Enter the value “255.255.255.0” in this field.
– Default gateway
– Enter the IP address of the base station here.
– Primary DNS server
– Enter the IP address of the base station here.
– Secondary DNS server
– Enter the IP address of a second DNS server here.
12. In the “Security” area define how the repeater con-
nection should be encrypted.
13. Enter a password.
14. Click “Apply”.
The “Repeater Settings” of the FRITZ!Box are dis-
played.
Please note that the WPA2 encryption method is only
available for AVM AVM devices.
FRITZ!Box Fon WLAN 7113 88
FRITZ!Box as a Repeater
15. We recommend printing out these settings.
This concludes the configuration of the FRITZ!Box as a
repeater.
Register the FRITZ!Box settings you printed out in the
base station operating in your wireless network.
More about Networks
FRITZ!Box Fon WLAN 7113 89
3 More about Networks
The FRITZ!Box is delivered with preconfigured network settings. Accord-
ing to these settings, all network devices connected with the FRITZ!Box
are located in a single network.
The network settings can be changed and adapted to your conditions
and needs. But you should do so only if you are well versed in network-
ing technology.
The Glossary explains concepts and terminology having to do with
IP networks.
The section “Network Overview” on page 89 introduces the net-
work overview of the FRITZ!Box.
The sections “IP Address” on page 91, “DHCP Server” on page 92
and “Subnetwork” on page 93 explain when it may make sense to
change the preconfigured network settings, what the effects of
these changes are, and how to make the changes.
3.1 Network Overview
The FRITZ!Box user interface shows an overview with all of
the devices and users connected with the FRITZ!Box.
The “Devices and Users” network overview is found in the
following two menus: “Start menu / Network” or
“Settings / Advanced Settings / System / Network”.
There is an entry in the network overview for each user
and each network device. The columns have the following
meanings:
Name This column displays the name under which
the user or the network device is known to
the FRITZ!Box. The name can be changed by
clicking the button to edit the entry.
IP Address Here the IP address is displayed with which
the device is integrated into the FRITZ!Box
network.
MAC Address This field shows the individual hardware ad-
dress of the given network device used to
control the devices in the network.
FRITZ!Box Fon WLAN 7113 90
IP Settings
3.2 IP Settings
The IP settings of the FRITZ!Box are preset upon delivery
with the following values:
The IP address and the corresponding subnet mask yield
the following values:
The following addresses are reserved for certain purpo-
ses:
3.3 UPnP Settings
The Universal Plug-and-Play (UPnP) service included in
your FRITZ!Box provides status information about the
FRITZ!Box to all connected computers. Programs with
UPnP support on these computers can receive this infor-
mation and use them to display the status of the
FRITZ!Box (e.g., DSL synchronization, connection status,
data transmission). UPnP service thus allows you to moni-
tor your FRITZ!Box from a connected computer.
The FRITZ!DSL software receives status information from
the FRITZ!Box via UPnP.
Factory Settings
All computers are located in the
same IP network
enabled
IP address 192.168.178.1
Subnet mask 255.255.255.0
DHCP server enabled
Network address of the subnet 192.168.178.0
Entire IP address range for the
computers
192.168.178.2 -
192.168.178.253
192.168.178.1 is used by the FRITZ!Box itself
192.168.178.254 reserved for internal use
192.168.178.255 broadcast address used to send messag-
es into the network
IP Address
FRITZ!Box Fon WLAN 7113 91
3.4 IP Address
Upon delivery the FRITZ!Box is assigned the following IP
address:
192.168.178.1
If you would like to change the IP address, please read
through the following sections. Also note the additional
information in the section “Reserved IP Addresses” on
page 91.
When Does It Make Sense to Change the IP Address?
You should change the IP address of the FRITZ!Box if the
following apply to your network:
You have an existing local IP network, one subnet
with several computers.
Fixed IP addresses are registered in the network set-
tings of the computer, and you do not want to or are
not permitted to change these addresses.
You want to connect the FRITZ!Box to the subnet in
order to make the FRITZ!Box features available to all
of the computers in the subnet.
Reserved IP Addresses
The entire IP network 192.168.180.0 in the FRITZ!Box is
reserved for internal purposes.
IP addresses from this network may not be assigned to the
FRITZ!Box.
FRITZ!Box Fon WLAN 7113 92
DHCP Server
3.5 DHCP Server
The FRITZ!Box is equipped with its own DHCP server. The
DHCP server is enabled by default in the factory settings.
The following range of IP addresses is reserved for the
DHCP server in the factory settings:
192.168.178.20 - 192.168.178.200
This IP address can be changed as needed.
Every time the operating system on a computer connected
with FRITZ!Box is started, the DHCP server assigns it an IP
address from the IP address range of the DHCP server.
Assigning the IP addresses via the DHCP server ensures
that all of the computers connected with the FRITZ!Box are
located in a single subnet.
Fixed IP Addresses when the DHCP Server Is Enabled
If you would like to configure fixed IP addresses on indi-
vidual computers connected with the FRITZ!Box despite
the enabled DHCP server, please note the following:
The IP addresses must be from the IP network of the
FRITZ!Box.
The IP addresses may not come from the address
range of the DHCP server.
Each IP address can be assigned only once.
Only one DHCP server may be active within any network.
The computers can receive their IP addresses from the
DHCP server only if the setting “Obtain an IP address au-
tomatically” is enabled in the their IP settings. For more
information, see the section “Obtaining an IP Address Au-
tomatically” from page 64.
Disabling the DHCP Server
FRITZ!Box Fon WLAN 7113 93
Disabling the DHCP Server
You can disable the DHCP server.
To make sure that all computers remain in the same IP net-
work as the FRITZ!Box, you must enter the IP addresses
manually in the computers’ network settings. First disable
the option “Obtain an IP address automatically” and then
enter the IP address manually in the appropriate field.
In the case of the preset IP address of the FRITZ!Box, the
following IP addresses are available for assignment to the
computers:
Each IP address can be assigned only once.
3.6 Subnetwork
By default the option “All computers are located in the
same IP network” is enabled in the FRITZ!Box.
If the factory settings were not changed, this setting has
the following effect:
The DHCP server of the FRITZ!Box assigns all of the com-
puters connected with the FRITZ!Box an IP address from
the address range of the DHCP server.
This means that all of the computers connected with the
FRITZ!Box are located in the same IP network.
Disabling “All computers are located in the same IP
network”
If you switch off the setting “All computers are located in
the same IP network”, the interfaces of the FRITZ!Box will
receive their own IP addresses.
192.168.178.2 - 192.168.178.253
FRITZ!Box Fon WLAN 7113 94
Changing the Network Settings
Factory Settings Upon delivery the interfaces of the FRITZ!Box are config-
ured as follows:
Thus the following address pools are available to the
DHCP server:
Computers connected with the FRITZ!Box via different in-
terfaces are located in different IP networks.
3.7 Changing the Network Settings
In order to change the network settings of the FRITZ!Box,
the Expert Mode must be enabled in the user interface:
1. Start a web browser on your computer and enter
fritz.box
in the address line of the browser.
2. Select the “Advanced Settings / System” menu in the
“Settings” area.
3. Click “Expert Mode” in the System menu, enable the
setting “Show expert settings” and confirm this
setting by clicking “Apply”.
Interface IP Address Subnet mask DHCP server
LAN 192.168.178.1 255.255.255.0 enabled
WLAN 192.168.182.1 255.255.255.0 enabled
Interface Address pool of the DHCP server at the
interface
LAN 192.168.178.20 - 192.168.178.200
WLAN 192.168.182.20 - 192.168.182.200
Interface network address of the IP network
LAN 192.168.178.0
WLAN 192.168.182.0
Changing the Network Settings
FRITZ!Box Fon WLAN 7113 95
Here is how to change the network settings:
1. Select the “Advanced Settings / System / Network”
menu in the “Settings” area.
2. Select the “IP Settings” tab.
3. Click the “IP Addresses” button.
The “IP Settings” page is opened.
4. Once all desired changes to the settings have been
configured, confirm by clicking “OK” to apply them.
Please note that changes to the network settings in the
FRITZ!Box may make it necessary to adjust the network
settings of your computer so that you can continue to ac-
cess the FRITZ!Box user interface.
FRITZ!Box Fon WLAN 7113 96
More about Internet Telephony
4 More about Internet Telephony
Voice over IP (VoIP)
Internet telephony has already been in use for years, but
today it allows even private customers the convenience fa-
miliar from conventional telephony, usually at significant-
ly lower prices.
Internet telephony has also made it considerably more
convenient to use applications like conference calls and
answering machines in networks. Further advantages
include global availability at a single telephone number,
and the development of new standards for security and
voice quality.
File Transfer All kinds of data transmission in the Internet use the Inter-
net Protocol (IP). IP is packet-oriented. This means that
the data are broken down into data packets for transmis-
sion and IP takes care of the transport of the individual da-
ta packets through the Internet. Language is also trans-
mitted in the Internet in this manner.
In opposition to this, fixed-line telephony transmits data
in a line-oriented manner. In this case data are transmit-
ted in a coherent data stream.
4.1 Telephony Scenarios
If you have configured both a fixed-line number and an In-
ternet telephone number in FRITZ!Box, you can make calls
in all directions:
from the fixed-line network into the fixed-line net-
work
from the Internet into the fixed-line network
from the Internet into the Internet
and receive calls from all directions as well.
Bandwidth Management
FRITZ!Box Fon WLAN 7113 97
4.2 Bandwidth Management
The FRITZ!Box is equipped with integrated bandwidth
management. This function ensures that the speech quali-
ty during telephone calls over the Internet is not reduced
by surfing activity. To do this, the FRITZ!Box adjusts all up-
loads and downloads to the currently available band-
width. Because the FRITZ!Box also places a higher priority
on Internet telephony connections over Internet data con-
nections, unwelcome interference is largely avoided. Just
as for any other analog call, once Internet telephony trans-
mission capacity has been reached, remote partners re-
ceive a busy signal.
FRITZ!Box Fon WLAN 7113 98
More Functions
5 More Functions
This chapter introduces additional useful functions and features of the
FRITZ!Box.
5.1 Night Service
In the FRITZ!Box you can set up Night Service for WLAN
and for the telephones connected to the FRITZ!Box.
Configure Night Service in the “Settings” area, using the
menu command “Advanced Settings / System / Night Ser-
vice”.
First define the period of time for which the Night Service
of the FRITZ!Box should be active. For instance, from
10:00 p.m. to 6:00 a.m.
The function must be enabled after you specify the settings.
“Switch off wireless network (WLAN)”
When this setting is selected, WLAN is switched off
during the Night Service period. This saves electrici-
ty. The wireless network can be switched back on at
any time manually by pressing the WLAN button.
Enable Do Not Disturb setting
When this setting is selected, the telephones con-
nected with the FRITZ!Box will not ring.
If you connected a fax machine to the FRITZ!Box, this
device is disabled during Night Service.
If you connected an answering machine to the
FRITZ!Box, this device is not active during Night Service.
Individual settings can be made for different devices;
for instance, different times for the Do Not Disturb
setting can be set for individual telephones. Or, you
can except individual devices entirely from the Do
Not Disturb setting. The individual settings can be
configured in the “Settings” area, in the “Advanced
Settings / Telephony / Telephony Devices” menu.
Alarm
FRITZ!Box Fon WLAN 7113 99
5.2 Alarm
The FRITZ!Box offers you the option of using connected
telephones as alarm clocks.
Configure the alarm function in the “Settings” area, using
the menu command “Advanced Settings / Telephony /
Alarm”.
Enable the alarm function, enter the time and (if relevant)
the day on which the alarm is to ring, and then select
which telephone should ring at the specified time. As a fi-
nal step, click the “Apply” button to save your settings in
the FRITZ!Box.
FRITZ!Box Fon WLAN 7113 100
Customer Service Guide
6 Customer Service Guide
Help on All Important Service Topics
AVM is there to help should any questions or problems arise. Here you
will find the important information you need, in the form of manuals,
updates and support.
Microsoft Updates In many cases problems which arise during operation can
be resolved by installing the current Microsoft Service
Pack or other Microsoft updates.
The current service packs and updates can be obtained
free of charge from Microsoft at the address:
www.microsoft.com
6.1 Documentation
To take advantage of all commands and features of your
FRITZ!Box Fon WLAN 7113, consult the following docu-
mentation:
Help In the FRITZ!Box user interface you can open the detailed
Help by clicking the “Help” buttons.
Readme The Readme file contains current information which was
not yet available at the time the manual was completed.
The Readme file is included on the FRITZ!Box CD.
Manual The manual of the FRITZ!Box Fon WLAN 7113 is included
in PDF format in the “Info” folder on the FRITZ!Box CD.
The current Adobe Acrobat Reader for reading PDF
documents can be downloaded from the Internet free of
charge at www.adobe.com
.
information in the Internet
FRITZ!Box Fon WLAN 7113 101
6.2 information in the Internet
On its web site AVM presents comprehensive information
on your AVM products as well as new product announce-
ments and new product versions.
Frequently Asked Questions (FAQs)
We would like to make our products as easy to use as pos-
sible. If you still have problems, sometimes a little tip is
all you need to resolve them. That is why we present you
with a selection of frequently asked questions.
The FAQs can be viewed at the following address:
www.avm.de/en/service/FAQs
6.3 Updates and Software
FRITZ!Box Fon WLAN 7113 provides firmware updates and
various software for the AVM for free downloading over the
Internet.
Firmware Use the “Firmware Update” Wizard on the FRITZ!Box user
interface to perform an update of your firmware.
In the “Settings” area, open the “Wizards / Firmware Up-
date” command to download the firmware from the Inter-
net and perform the update with a single mouse click.
Programs The “Software” menu in the “Settings” area shows all of
the software for your FRITZ!Box available for downloading
from the Internet.
The latest software is also available for download at the
following address:
www.avm.de/en/download
FTP Experienced users can also download updates from the
AVM FTP server. Click the “FTP Server” link in the down-
load area, or enter the following address:
ftp.avm.de
FRITZ!Box Fon WLAN 7113 102
Support from the Service Team
6.4 Support from the Service Team
Should problems with your FRITZ!Box arise, we
recommend taking the following steps:
1. If you have questions about starting operation of
your FRITZ!Box, please consult the chapter
“Connection” from page 12.
2. Please see the information in the section “Product
Details” from page 70.
3. If you have any problems, seek first aid by consulting
the chapter “Troubleshooting” from page 53.
This chapter also presents useful tips on problems
with establishing connections.
4. The next step is to consult the FAQs in the Internet:
www.avm.de/en/service/FAQs
This site contains answers to questions our
customers have frequently asked our Support team.
5. If you do not find the answer you need in the FAQs,
AVM Support will assist you. The support desk can be
reached by e-mail or by fax.
Support by E-mail
You can send us an English-language e-mail request at
any time using the Service area of our web site. The Ser-
vice area can be reached at:
www.avm.de/en/service
Select the product for which you need support from the
Support area. Click the “Mail Form” link to open the e-mail
form. Fill out the form and send it to AVM support by click-
ing the “Send” button. Our Support team will respond by
e-mail as quickly as possible.
Please take advantage of the information sources
described above before contacting AVM support.
Support by Fax
FRITZ!Box Fon WLAN 7113 103
Support by Fax
If necessary, you can reach AVM Support at the fax num-
ber:
+49 (0)30 / 39 97 62 66
The following information should be included in your fax
to the Support team:
Your name and address.
An e-mail address or fax number at which you can be
reached.
the serial number of the FRITZ!Box
The serial number is printed on the sticker attached
to the base of the device. Support staff will always
check this number to ensure that you are a registered
user.
Which operating system are you using (e.g.,
Windows Vista or Windows XP)?
How is the FRITZ!Box connected to your computer,
with a network cable or via WLAN?
At what step of the installation or in which
application does an error occur or an error message
appear? What is the exact wording of the message?
Which firmware does FRITZ!Box use? The firmware
version is displayed on the “Overview” page of the
FRITZ!Box user interface.
Once you have put together this information, please fax it
to AVM Support. The Support team will assist you in
resolving your problem.
FRITZ!Box Fon WLAN 7113 104
Glossary
Glossary
802.11g++ Term for an accelerated variant of WLAN based on
IEEE 802.11g.
The 802.11g++ procedure functions as a kind of “turbo
mode” for the IEEE 802.11g WLAN standard. By
implementing special accelerations methods (frame
bursting, packet aggregation), it increases the maximum
gross transmission rate to 125 Mbit/s - as opposed to
54 Mbit/s for radio communication compliant with
IEEE 802.11g. As a result, the maximum net data
transmission ´rate increases by around 35 percent, from
approximately 25 Mbit/s to approximately 34 Mbit/s.
If multiple devices that support the turbo mode
802.11g++ are located in the same WLAN radio cell, they
can communicate with each other at higher speeds.
However, this results in slight disadvantages for all other
devices within the WLAN radio cell that do not support the
turbo mode.
Since 802.11g++ is merely a non-standardized variant of
WLAN, the turbo mode works only between devices
designed for it by a single manufacturer, because even
when identical chip sets are used, the implementation of
the procedure defined in 802.11g++ differs slightly from
one manufacturer to the next.
ADSL abbreviation for Asymmetric Digital Subscriber Line
Designates a fast kind of file transfer that works with
standard copper cables and transports signals in both
directions at different speeds (upstream at 640 Kbit/s and
downstream at up to 9 Mbit/s).
ADSL2 abbreviation for Asymmetric Digital Subscriber Line 2
ADSL2 (G.992.3) is a further development of the ADSL
norm (G.992.1/G.992.2).
Glossary
FRITZ!Box Fon WLAN 7113 105
ADSL2 offers range much greater than did the first ADSL
generation, and is significantly more robust than ADSL, as
it can simply disable single carrier frequencies when they
produce interference. This feature allows ADSL2 to
prevent synchronization losses.
With a throughput rate of up to 12 Mbit/s downstream,
ADSL2 offers considerably greater bandwidth than ADSL.
ADSL2 is completely downward compatible, meaning that
terminal equipment compliant with ADSL can also be
operated on ADSL2 lines, although they cannot exploit the
advantages of ADSL2.
ADSL2+ abbreviation for Asymmetric Digital Subscriber Line 2 with
extended bandwidth
ADSL2+ (G.992.5) is a further development of the ADSL
norm (G.992.1/ G.992.2).
ADSL2+ offers a doubled frequency range used for
downstream transmission, and thus double the maximum
bandwidth achievable for downstream to 24 Mbit/s.
ADSL2+ is completely downward compatible, meaning
that terminal equipment compliant with ADSL and ADSL2
can also be operated on ADSL2+ lines, although they
cannot exploit the advantages of ADSL2+.
ADSL-Controller An ADSL-Controller is an electronic hardware module that
allows a computer to access an ADSL line. ADSL-
Controllers are stationary equipment, included on internal
ADSL cards (for the PCI bus) or in external ADSL modems
(with USB or Ethernet ports).
Context menu The context menu is a menu that is normally not visible.
The context menu opens only when you click with the right
mouse button on a button, a graphic or a word. Depending
on where you clicked, the context menu contains only the
most common menu commands for the given object.
If you are using an Apple computer, click the “Ctrl” while
clicking instead.
FRITZ!Box Fon WLAN 7113 106
Glossary
Default gateway see gateway
DHCP abbreviation for Dynamic Host Configuration Protocol
DHCP is a protocol for the dynamic negotiation of the
operating parameters for the TCP/IP protocol (TCP is a
transport protocol based on the Internet protocol).
The computers of a local IP network (DHCP clients) access
the DHCP server as part of their operating systems' start
procedure.
The central administration of the TCP/IP operation
parameters makes it possible to avoid address conflicts
caused by IP addresses accidentally assigned more than
once.
DHCP server The DHCP server assigns each client an IP address that is
has not yet been assigned at the present time. The DHCP
server also informs the client of the IP addresses of the
DNS server to be used and of the default gateway. In
assigning the IP addresses the DHCP server selects from a
prescribed pool of IP addresses.
DNS abbreviation for Domain Name System
Domain Name Service takes care of determining the IP
address for a given domain name. Domain Name Service
is running on every computer. It accepts the domain name
entered by a user and inquires about the corresponding IP
address at a DNS server known to the service. If a DNS
server cannot answer the inquiry itself, it can inquire
about the IP address (DNS resolution) at other DNS
servers.
If the Domain Name Service receives negative information
from the DNS server (domain name not known), it can
send inquiries to other DNS servers it knows or return a
corresponding error message to the user. If it receives the
desired IP address instead, the application can use the IP
address to retrieve the destination desired by the user.
Glossary
FRITZ!Box Fon WLAN 7113 107
This hierarchical system of DNS servers is known as the
Domain Name System. The addresses of the DNS servers
at which the Domain Name Service is to inquire by default
generally are handed over to the computer by the Internet
Service Provider automatically whenever a connection to
the Internet is established. In local networks addresses
can also be assigned via DHCP. Otherwise they must be
entered manually in the TCP/IP settings of the computer
by the user or the system administrator.
Download Downloading files from the Internet
DSL modem A DSL modem connects a computer to the Internet via the
DSL line. In contrast to the analog modem, a connection
via the DSL modem does not mean that the telephone line
is busy.
DSL router A combination of a DSL modem and a router is called a
DSL router.
Dynamic DNS abbreviation for Dynamic Domain Name System
Dynamic DNS is a service which allows a computer always
to be reached under the same domain name despite
constantly changing IP addresses. This means that even
private users have an economical way of placing their own
Internet offers on their computer at home.
It works by transmitting the current IP address to a special
DDNS server each time the IP address changes. Except for
the few seconds between the cancellation of the old IP
address and the notification of the new IP address, the
computer can always be reached at the selected domain
name.
Dynamic IP
address
A dynamic IP address is an IP address valid only for the
duration of one Internet or network session.
Every computer participating in the Internet must have a
uniquely assigned public IP address. Since only a limited
number of such IP addresses is available, they must be
used sparingly. That is why most of the Internet
participants who dial in to the Internet receive a dynamic
FRITZ!Box Fon WLAN 7113 108
Glossary
IP address. They are called dynamic because every
participant receives a new public address that has not
been assigned yet each time he or she dials in to the
Internet.
By contrast, dynamic addresses are usually used in local
IP networks because they are easy to handle, and because
using them avoids incorrect IP address entries or
unintentional double assignments. The DHCP service is
responsible for assigning unique dynamic IP addresses.
FAQ abbreviation for Frequently Asked Questions
FAQs are collections with answers to frequently asked
questions on a certain subject area.
Firewall A firewall protects a computer or local network against
attacks from the Internet.
Most firewalls work with packet filters, which merely
check the IP addresses and port numbers of incoming and
outgoing data packets and filter the packets according to
prescribed rules.
Some firewalls also integrate additional concepts like IP
masquerading and NAT to decouple data traffic by
distinguishing strictly between the internal and external
network.
Especially effective firewalls go even further, analyzing
and evaluating the contents of the packets and filtering
them according to prescribed rules. Such techniques may
also include a Stateful Packet Inspection Firewall, for
instance.
Firmware The firmware is saved in programmable components
within a device. Through the possibility of updating the
firmware by computer at any time, manufacturers enjoy
great flexibility in reacting to the demands of the
operational environment, integrating new functions
requested by customers, and eliminating errors
discovered after production,
Glossary
FRITZ!Box Fon WLAN 7113 109
Fixed IP address Fixed IP addresses are IP addresses which are
permanently assigned to a computer or another device
like a network printer.
Assigning fixed IP addresses makes sense in cases where
a local network has a sufficiently large pool of IP
addresses available, or when a computer is always
supposed to be accessible at a certain address (such as a
web server or e-mail server).
FTP abbreviation for File Transfer Protocol
The File Transfer Protocol allows files to be exchanged
between two computers operating in the Internet. Data
exchange takes place via an FTP server and what is known
as an FTP client. The more convenient FTP clients are
available as stand-alone software or are components of
some ISDN data transfer software; simple FTP clients are
now included in many web browsers.
Gateway Gateway is a general term designating an interface
between two computer networks. Such a network
interface can be realized using a router or a bridge, for
instance.
If a computer wants to transfer data packets to a computer
in another network, it must first transmit the packet to the
gateway. To do this, the computer must know the address
of the gateway.
If all packets that cannot be delivered in a local network
always are to be transmitted to their given recipients via
the same gateway, for this purpose the address of the
gateway must be saved as the default gateway in the
network settings of the computer.
Such a default gateway for the computer is negotiated
automatically by the operating system or the dialing
software whenever an ISDN-Controller or DSL-Controller
establishes a connection to the Internet. If a router is used
for the shared Internet access in a local network, the IP
address of the router must be entered as the default
gateway in the TCP/IP settings of each computer that
FRITZ!Box Fon WLAN 7113 110
Glossary
wishes to use the Internet connection. If the TCP/IP setting
is configured by means of a DHCP server, there is no need
to enter the gateway address manually.
IP abbreviation for Internet Protocol
The IP Internet Protocol is the most important basic
protocol for the control of data exchange in local networks
and in the Internet. The Internet protocol works without a
connection; in other words, data packets are transmitted
from the sender to the recipient without previous
consultation. The addresses of the recipient and the
sender in the data packets are given as IP addresses.
IP address abbreviation for Internet Protocol address
In IP-based networks, for instance in the Internet and local
networks, all connected devices are addressed via their IP
addresses. So that data packets are sure to be delivered
to the right address, each IP address may be assigned
only once within the Internet or a local IP network.
The IP address consists of four three-digit groups of
numbers (for instance, 192.168.178.247). Each group of
numbers can assume values between 000 and 255.
Every IP address contains two components: the network
address and the host address. These two components can
be read out of an IP address only if the subnet mask is
also specified.
IP addresses can be public or private, and also fixed or
assigned dynamically. See the corresponding entries in
the Glossary for more information.
IP addressing Addressing is one of the main functions of the Internet
Protocol (IP). Internet addresses can be written in
decimal, octal or hexadecimal notation. The FRITZ!Box
uses "dotted-decimal" notation: The four bytes of an
address are represented by decimal numbers separated
by dots. The total volume of Internet addresses, the
address space, is separated into classes (A, B, C, D, and
E). The full set of IP addresses, called the address space,
Glossary
FRITZ!Box Fon WLAN 7113 111
is grouped into address classes designated as A, B, C, D
and E. Only the first three of these five address classes are
actually used. These classes can be described as follows:
Properties of IP Address Classes
Every IP address consists of two parts: the network
address and the host address. The sizes of the network
address and the host address are variable, and
determined by the first four bits (of the first byte) of the IP
address.
IP
masquerading
By means of IP masquerading a computer or LAN can be
protected from unauthorized connection request from the
Internet. Masquerading works by converting the IP
addresses used in a network to one public IP address.
From the outside it appears that all requests are sent from
a single computer.
IP network A network in which data exchange takes place on the
basis of the Internet Protocol is called an IP network.
Outside dialing
prefix
The Outside Dialing Prefix is the digit dialed at an
extension line to obtain an outside line. Generally this is
“0”.
Port So that a single network connection on a computer can be
used by multiple applications to exchange data with
remote sites at the same time, a computer administers
what are known as ports for the IP-based protocols TCP
and UDP. Ports substantiate the point of access for the
data packets delivered via the IP Internet protocol. While
Classes Properties Network address
Decimal value
Class A
address
few networks, many hubs 0-127
Class B
address
intermediate distribution of
networks and hubs
128-191
Class C
address
many networks, few hubs 192-223
FRITZ!Box Fon WLAN 7113 112
Glossary
the IP address determines the destination computer quite
generally, the port addresses the communication interface
provided by an application for a certain communication
procedure.
The Internet protocol allots 16 bits for the specification of
the port number. Thus a total of 65,535 different port
numbers can be specified. Ports up to port number 1,024
are reserved for special system applications and typical
Internet applications. These include, for instance, the port
numbers 21 for FTP (File Transfer Protocol), 25 for SMTP
(Simple Mail Transfer Protocol), 53 for DNS (Domain Name
Service) and 80 for HTTP (Hypertext Transfer Protocol).
Ports are primarily of interest to users for their role in
protecting an Internet connection from external attacks.
Most firewalls offer the possibility of preventing data
traffic on certain ports. This means that certain port
numbers can be blocked to prevent data from being
delivered to system services. This is also a way of
preventing any Trojans that may have infected your
computer from receiving data on ports it created as means
of accessing your computer for potentially damaging
activities. A firewall blocks most atypical port numbers not
required for normal operation of an application and offers
specialized users the opportunity to forward specified
ports.
Port forwarding With port forwarding it is possible to specify ports that will
allow all incoming or outgoing data packets to pass
through a router or firewall.
If a computer from the local network offers server services,
for instance, the settings of a router using NAT or IP
masquerading must enable or forward the port used by
the server service for access to incoming data packets and
thus keep it open permanently. The private IP address of
the given computer must be saved as the destination
address for all of the packets arriving at the port.
Typical server applications which require port forwarding
are FTP and Web servers. To allow access to a computer via
remote management software like Symantec’s
Glossary
FRITZ!Box Fon WLAN 7113 113
pcAnywhere or Microsoft’s Remote Desktop, or even use
of a file-sharing program like eDonkey, the required ports
must be released for port forwarding. Port forwarding
settings for the most important application cases are
quite simple as long as the settings of the router or the
firewall already contain rules with a corresponding
preconfiguration.
Private IP
address
Private IP addresses are used for computers and other
network devices within local IP networks.
Since many local IP networks are not connected to the
Internet except via single computers or routers (gateway),
certain address ranges are excluded from the publicly
available IP addresses so that they are available for
assignment in local IP networks. An IP address may only
be assigned once within the local network. A private IP
address may exist in any number of other local networks.
Public IP
address
A public IP address is an IP address valid in the Internet.
Every computer or router participating in the Internet must
have a uniquely assigned public IP address. This address
is usually negotiated dynamically with the Internet Service
Provider when a connection to the Internet is dialed. The
Internet Service Provider assigns the negotiated IP
address to the computer or router for the duration of an
Internet session.
Stick & Surf Stick & Surf is a technique developed by AVM for the fast,
simple, error-free and secure configuration of radio
networks. This technique allows for the straightforward
transmission of all important parameters of a radio
network from the access point to any computer that is to
be added to the radio cell.
In this process the radio parameters used, including
WLAN channel, SSID and WLAN standard, as well as
security parameters like the encryption method and
network key, are transferred almost fully automatically
from the WLAN access point to the computer with the
WLAN client that is to be connected.
FRITZ!Box Fon WLAN 7113 114
Glossary
Subnetwork A local IP network can consist of one subnetwork or be
divided into multiple subnetworks. The division into
subnetworks is performed when the local IP network is
configured. The subnetworks of a local IP network are also
IP networks.
Subnet mask The subnet mask indicates which part of an IP address is
the network address and which the address of the
computer. The network address defines what is called the
subnet.
Example 1
IP address: 192,168,178,247
Subnet mask: 255.255.255.0
The assignment of the first three groups of numerals in the
subnet mask indicates that the first three groups of numerals in
the IP address define the network. The following addresses
result:
Network address of the subnet: 192.168.178.0
Address of the computer in the
subnet:
192.168.178.247
IP address pool in the subnet: 192.168.178.0 -
192.168.178.255
The IP addresses
192.168.178.0 and
192.168.178.255 are
reserved. This means that the
addresses from
192.168.178.1 to
192.168.178.254 are
available for assignment to the
computers. Therefore a
maximum of 254 computers
can be included in the
subnetwork.
Glossary
FRITZ!Box Fon WLAN 7113 115
TCP/IP abbreviation for Transmission Control Protocol / Internet
Protocol
TCP/IP is the “language” of the Internet. TCP/IP is used to
refer to a suite of protocols used for data communication
over the Internet. TCP and IP are the network and transport
protocols underlying most Internet services, including file
transfer (FTP) and e-mail communication (SMTP). TCP/IP is
available for practically all computer systems. TCP/IP thus
offers the advantage of trouble-free communication
between otherwise incompatible networks and systems.
TR-069 T-069 is an HTTP-based protocol for communication
between CPE (Customer Premises Equipment) and an Auto
Configuration Server (ACS) belonging to the Internet
Service Provider. The TR-069 protocol is also known under
the alternative name CPE WAN Management Protocol
(CWMP). It offers the possibility of setting up the terminal
Example 2
IP address: 192.168.178.247
Subnet mask: 255.255.0.0
The assignment of the first two groups of numerals in the
subnet mask indicates that the first two groups of numerals in
the IP address define the network. The following addresses
result:
Network address of the subnet: 192.168.0.0
Address of the computer in the
subnet:
192.168.178.247
IP address pool in the subnet: 192.168.0.0 -
192.168.255.255
That’s 65,536 IP addresses.
The IP addresses 192.168.0.0
and 192.168.255.255 are
reserved. This means that the
addresses from 192.168.0.1 to
192.168.255.254 are
available for assignment to the
computers.
FRITZ!Box Fon WLAN 7113 116
Glossary
device securely and automatically and thus, most
importantly, facilitates simple initial configuration of the
ADSL terminal equipment by the end customer.
The TR-069 protocol can be used for automatic
configuration only if it is actively supported by the given
terminal device. For this an Auto Configuration Client
(ACC) must be integrated in the device. The specifications
for automatic configuration of the ADSL terminal device
are stored on the Auto Configuration Server by the given
Internet Service Provider. The process of automatic
configuration via TR-069 is initiated by the ADSL terminal
device. First the user enters a security key and then the
settings are retrieved from the Auto Configuration Server
and implemented in the ADSL terminal device without any
further interaction with the user. During this process all of
the communication between the ADSL terminal device and
the Auto Configuration Server takes place in encrypted
form.
Update A more recent version of software or firmware is called an
update. Updates are often free of charge, resolve minor
programming errors, and sometimes also offer new
functions.
Upload This term designates the procedure of transmitting files
from one’s own computer to another computer in the
Internet.
UPnP abbreviation for Universal Plug and Play (UPnP)
UPnP is an extension of the Microsoft Plug & Play standard
that allows devices to network globally and to exchange
services – without a central server or computer.
UPnP allows devices from all kinds of manufacturers
(stereo systems, routers, printers, house controls) to be
controlled via an IP-based network, with or without central
control through a gateway. It is based on a number of
standardized network protocols and data formats.
Expressed simplistically, devices can communicate with
each other using UPnP to exchange information.
Glossary
FRITZ!Box Fon WLAN 7113 117
Today the UPnP forum specifies the UPnP standard and
certifies devices that are compliant with the standard.
VoIP abbreviation for Voice over IP, also known as Internet
telephony
Voice over IP makes telephone calls possible via the
Internet. The technology has already been in use for years,
but today it allows even private customers the
convenience familiar from conventional telephony, usually
at significantly lower prices. VoIP has also made it
considerably more convenient to use applications like
conference calls and answering machines in networks.
Added to this are global accessibility under a single
telephone number and new VoIP features like the Buddy
List known from chat rooms.
Internet telephony used to be possible only with a
headset connected to the computers of the callers and
their conversation partners. Today voice connections via
the Internet, even to fixed-line and mobile networks, can
be conducted conveniently using VoIP telephone systems
that allow already existing analog telephones to be used
even when the computer is switched off. Various Internet
Service Providers and telephony carriers provide SIP-
fixed-line gateways for this purpose. Such a gateway is
used to produce voice connections between the Internet
and conventional telephone networks. In principle VoIP
conversations are possible via every DSL access point, but
for convenient use with existing terminal equipment, and
for conversations with the fixed-line and mobile networks,
it is important that the DSL provider support what is
known as the SIP standard. SIP is the current standard
defined for VoIP by the IETF (Internet Engineering Task
Force).
FRITZ!Box Fon WLAN 7113 118
Glossary
WLAN abbreviation for Wireless LAN, or Wireless Local Area
Network
The term WLAN designates the industry standard for
wireless local networks passed by the Institute of
Electrical and Electronics Engineers (IEEE) in 1997 under
the title IEEE 802.11.
By means of WLAN technology, individual computers or
network devices like printers or DSL access points can be
linked wirelessly to an existing cable-connected local
network (LAN), or LANs can be converted completely to a
wireless structure. A further useful purpose for WLAN
technology is to link segments of existing cable-
connected networks.
Although WLAN was actually developed only for short-
range connections, by cascading WLAN access points or
implementing transmission networks with high-power
point-to-point radio transmission, even network segments
located further from each other can be linked or network
participants in relatively remote locations can be
economically and easily integrated into an existing
network.
WLAN access points often also serve as access points to
the Internet in private or public institutions. Many
airports, hotels and cafes, for instance, make WLAN
hotspots available to their customers, either free or
subject to a charge. Ultimately this has maneuvered WLAN
into serious competition with mobile UMTS technology.
The application possibilities for wireless network
communication also overlap with Bluetooth technology.
For mobile devices with limited energy capacity Bluetooth
is the more useful solution, however, as Bluetooth uses
considerably less power than wireless LAN. What is more,
Bluetooth technology is more flexible and thus can offer a
greater bandwidth of potential applications.
Index
FRITZ!Box Fon WLAN 7270 119
Index
A
access rights
user interface . . . . . . . . . . . . . . . . 23
alarm. . . . . . . . . . . . . . . . . . . . . . 31
, 37
alternating between calls . . . . . . . . . 45
ambient conditions . . . . . . . . . . . . . . 74
analog telephone line . . . . . . . . . . . . 21
analog terminal equipment. . . . . . . . 22
answering machine
connecting . . . . . . . . . . . . . . . . . . 22
setting up . . . . . . . . . . . . . . . . . . . 28
audio signals
acknowledgement tone. . . . . . . . 32
autochannel . . . . . . . . . . . . . . . . . . . . 82
automatic outside dialing option . . . 40
B
baby monitor . . . . . . . . . . . . . . . . . . . 51
bandwidth management . . . . . . . . . . 97
base station . . . . . . . . . . . . . . . . . . . . 85
Busy on Busy . . . . . . . . . . . . . . . . . . . 41
busy on busy . . . . . . . . . . . . . . . . . . . 41
C
cable
DSL/telephone cable. . . . . . . . . . 70
network cable . . . . . . . . . . . . . . . 71
call blocking . . . . . . . . . . . . . . . . . . . . 30
Call List. . . . . . . . . . . . . . . . . . . . . . . . 30
call waiting . . . . . . . . . . . . . . . . . . . . . 44
CLIP. . . . . . . . . . . . . . . . . . . . . . . . . . . 40
CLIR. . . . . . . . . . . . . . . . . . . . . . . . . . . 39
computer
connecting . . . . . . . . . . . . . . . . . . 14
connecting . . . . . . . . . . . . . . . . . . . . . 12
analog fixed-line network . . . . . . 21
answering machine . . . . . . . . . . . 22
computer . . . . . . . . . . . . . . . . . . . 14
DSL with telephone line . . . . . . . 20
electrical power . . . . . . . . . . . . . . 13
fax machine . . . . . . . . . . . . . . . . . 22
FRITZ!WLAN USB Stick . . . . . . . . . 17
LAN . . . . . . . . . . . . . . . . . . . . . . . . 16
network hub or switch . . . . . . . . . 16
network port . . . . . . . . . . . . . . . . . 15
sockets for analog terminal devices
22
telephone . . . . . . . . . . . . . . . . . . . 22
WLAN. . . . . . . . . . . . . . . . . . . . . . . 17
connecting a fax machine . . . . . . . . . 22
Connecting a Telephone . . . . . . . . . . 22
connecting an answering machine . . 22
consultation . . . . . . . . . . . . . . . . . . . . 48
contact for Help . . . . . . . . . . . . . . . . 102
conventions . . . . . . . . . . . . . . . . . . . . . 6
copyright . . . . . . . . . . . . . . . . . . . . . . . . 2
customer service . . . . . . . . . . . . . . .100
D
declaration of CE conformity . . . . . . . 75
declaration of conformity. . . . . . . . . . 75
defining connection type . . . . . . 31
, 42
DHCP server
disable . . . . . . . . . . . . . . . . . . . . . 93
fixed IP address . . . . . . . . . . . . . . 92
integrated . . . . . . . . . . . . . . . . . . . 92
dialing rules . . . . . . . . . . . . . . . . . . . . 31
disable
DHCP server . . . . . . . . . . . . . . . . . 93
WLAN. . . . . . . . . . . . . . . . . . . . . . . 36
displaying the incoming Caller ID . . . 40
disposal . . . . . . . . . . . . . . . . . . . . . . . 76
do not disturb . . . . . . . . . . . . . . . . . . . 36
documentation . . . . . . . . . . . . . . . . .100
DSL cable . . . . . . . . . . . . . . . . . . . . . . 70
DSL connection
with telephone line . . . . . . . . . . . 20
DSL/telephone cable . . . . . . . . . . . . . 70
FRITZ!Box Fon WLAN 7270 120
Index
E
ECT . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
electrical power
connecting . . . . . . . . . . . . . . . . . . 14
enable
WLAN . . . . . . . . . . . . . . . . . . . . . . 36
error search . . . . . . . . . . . . . . . . . . . . 53
explicit call transfer . . . . . . . . . . . . . . 49
F
factory settings . . . . . . . . . . . . . . . . . 35
DHCP server . . . . . . . . . . . . . . . . . 92
IP address . . . . . . . . . . . . . . . . . . 91
network . . . . . . . . . . . . . . . . . . . . 90
network name . . . . . . . . . . . . . . . 81
subnet . . . . . . . . . . . . . . . . . . . . . 93
FAQs . . . . . . . . . . . . . . . . . . . . . . . . . 101
fax
setting up . . . . . . . . . . . . . . . . . . . 29
fax machine
analog. . . . . . . . . . . . . . . . . . . . . . 28
fax number of support desk . . . . . . 103
features . . . . . . . . . . . . . . . . . . . . . . . . 9
fixed-line number. . . . . . . . . . . . . . . . 27
frequency ranges
WLAN . . . . . . . . . . . . . . . . . . . . . . 82
FRITZ!WLAN USB Stick
connecting . . . . . . . . . . . . . . . . . . 17
H
Help
customer service . . . . . . . . . . . . 100
troubleshooting . . . . . . . . . . . . . . 53
hold . . . . . . . . . . . . . . . . . . . . . . . . . . 48
hub
network . . . . . . . . . . . . . . . . . . . . 16
I
imprint . . . . . . . . . . . . . . . . . . . . . . . . . 2
information in the Internet. . . . . . . .101
FAQs . . . . . . . . . . . . . . . . . . . . . .101
installation . . . . . . . . . . . . . . . . . . . . . 12
requirements . . . . . . . . . . . . . . . .11
with CD . . . . . . . . . . . . . . . . . . . . . 12
without CD . . . . . . . . . . . . . . . . . . 13
instructions
security . . . . . . . . . . . . . . . . . . . . . . 7
interfaces . . . . . . . . . . . . . . . . . . . . . . 73
Internet connection . . . . . . . . . . . . . . 25
manual . . . . . . . . . . . . . . . . . . . . . 25
Wizard . . . . . . . . . . . . . . . . . . . . . . 25
Internet connections
setting up . . . . . . . . . . . . . . . . . . . 25
Internet telephone number
entering. . . . . . . . . . . . . . . . . . . . . 28
Internet telephony . . . . . . . . . . . . . . . 96
bandwidth management . . . . . . . 97
telephony scenarios. . . . . . . . . . . 96
IP address . . . . . . . . . . . . . . . . . . . . . . 91
factory settings. . . . . . . . . . . . . . . 91
obtaining automatically in Linux. 68
obtaining automatically in Mac OS X
68
obtaining automatically in Windows
XP . . . . . . . . . . . . . . . . . . . . . . . . 65
obtaining automatically in
Windows 2000 . . . . . . . . . . . . . 66
obtaining automatically in
Windows Vista. . . . . . . . . . . . . . 64
IP settings . . . . . . . . . . . . . . . . . . . . . . 90
change . . . . . . . . . . . . . . . . . . . . . 94
K
keypad sequences . . . . . . . . . . . . . . . 52
L
LAN
connecting . . . . . . . . . . . . . . . . . . 14
legal notice . . . . . . . . . . . . . . . . . . . . . . 2
Index
FRITZ!Box Fon WLAN 7270 121
M
making internal calls . . . . . . . . . . . . . 43
N
network. . . . . . . . . . . . . . . . . . . . . . . . 89
connecting . . . . . . . . . . . . . . . . . . 15
factory settings . . . . . . . . . . . . . . 90
IP settings . . . . . . . . . . . . . . . . . . 90
network overview. . . . . . . . . . . . . 89
network cable. . . . . . . . . . . . . . . . . . . 71
network devices. . . . . . . . . . . . . . . . . 89
network hub . . . . . . . . . . . . . . . . . . . . 16
network name . . . . . . . . . . . . . . . . . . 81
network settings . . . . . . . . . . . . 89
, 90
change . . . . . . . . . . . . . . . . . . . . . 94
UPnP . . . . . . . . . . . . . . . . . . . . . . . 90
network switch. . . . . . . . . . . . . . . . . . 16
new firmware . . . . . . . . . . . . . . . . . . 101
notice
legal . . . . . . . . . . . . . . . . . . . . . . . . 2
number
entering local . . . . . . . . . . . . . . . . 27
fixed-line . . . . . . . . . . . . . . . . . . . 27
Internet telephone number . . . . . 27
Wizard . . . . . . . . . . . . . . . . . . . . . 27
O
obtaining an IP address automatically64
opening the graphic user interface. . 23
P
package contents. . . . . . . . . . . . . . . . 10
password protection
user interface . . . . . . . . . . . . . . . . 23
physical properties . . . . . . . . . . . . . . 74
picking up a call. . . . . . . . . . . . . . . . . 44
ports and lines . . . . . . . . . . . . . . . . . . 73
Product Details. . . . . . . . . . . . . . . . . . 70
R
recovery
electrical equipment . . . . . . . . . . 76
electronic equipment. . . . . . . . . . 76
recycling . . . . . . . . . . . . . . . . . . . . . . . 76
repeater
WDS. . . . . . . . . . . . . . . . . . . . . . . . 86
requirements for operation . . . . . . . . 11
room monitoring. . . . . . . . . . . . . . . . . 51
S
security
operating instructions . . . . . . . . . . 7
user interface . . . . . . . . . . . . . . . . 23
serial number . . . . . . . . . . . . . . . . . . 103
service team . . . . . . . . . . . . . . . . . . .102
setting up
Internet connection . . . . . . . . . . . 25
on the telephone . . . . . . . . . . . . . 35
telephony devices . . . . . . . . . . . . 28
settings
network . . . . . . . . . . . . . . . . . . . . . 90
obtaining an IP address automatically
64
save. . . . . . . . . . . . . . . . . . . . . . . . 24
telephony devices . . . . . . . . . . . . 29
shortening the dialing procedure . . . 42
SSID. . . . . . . . . . . . . . . . . . . . . . . . . . . 81
starting operation. . . . . . . . . . . . . . . . 12
with CD . . . . . . . . . . . . . . . . . . . . . 12
without CD . . . . . . . . . . . . . . . . . . 13
support . . . . . . . . . . . . . . . . . . . . . . .102
by e-mail . . . . . . . . . . . . . . . . . . .102
information in the Internet . . . .101
service team . . . . . . . . . . . . . . . .102
support by fax. . . . . . . . . . . . . . . 103
suppress call waiting . . . . . . . . . . . . . 38
suppress outgoing Caller ID. . . . . . . . 39
switch . . . . . . . . . . . . . . . . . . . . . . . . . 16
symbols. . . . . . . . . . . . . . . . . . . . . . . . . 6
operating instructions . . . . . . . . . . 6
FRITZ!Box Fon WLAN 7270 122
Index
T
technical specifications . . . . . . . . . . 73
physical properties . . . . . . . . . . . 74
ports and interfaces . . . . . . . . . . 73
Telephone Book . . . . . . . . . . . . . . . . . 30
telephone connections . . . . . . . . . . . 27
configuring . . . . . . . . . . . . . . . . . . 27
telephony
alarm . . . . . . . . . . . . . . . . . . . . . . 31
answering machine . . . . . . . . . . . 22
blocking calls. . . . . . . . . . . . . . . . 30
Call List. . . . . . . . . . . . . . . . . . . . . 30
dialing rules . . . . . . . . . . . . . . . . . 31
functions . . . . . . . . . . . . . . . . . . . 30
settings . . . . . . . . . . . . . . . . . . . . 29
Telephone Book . . . . . . . . . . . . . . 30
telephony devices
setting up . . . . . . . . . . . . . . . . . . . 29
supported. . . . . . . . . . . . . . . . . . . 29
telephony scenarios . . . . . . . . . . . . . 96
three-party conference call . . . . . . . . 46
transferring calls . . . . . . . . . . . . . . . . 49
troubleshooting . . . . . . . . . . . . . . . . . 53
U
uninstallation
FRITZ!Box . . . . . . . . . . . . . . . . . . . 69
Update
Microsoft . . . . . . . . . . . . . . . . . . 100
update
firmware . . . . . . . . . . . . . . . . . . . 101
UPnP . . . . . . . . . . . . . . . . . . . . . . . . . 116
settings . . . . . . . . . . . . . . . . . . . . 90
user interface
password protection . . . . . . . . . . 23
problems opening . . . . . . . . . . . . 53
save settings . . . . . . . . . . . . . . . . 24
V
Voice over IP (VoIP) . . . . . . . . . . . . . . 96
W
WDS
base station . . . . . . . . . . . . . . . . . 85
repeater . . . . . . . . . . . . . . . . . . . . 86
WLAN range . . . . . . . . . . . . . . . . . 83
WEP security mechanism. . . . . . . . . . 79
WLAN. . . . . . . . . . . . . . . . . . . . . . . . . . 77
base station . . . . . . . . . . . . . . . . . 85
frequency ranges . . . . . . . . . . . . . 82
range . . . . . . . . . . . . . . . . . . . . . . . 83
repeater . . . . . . . . . . . . . . . . . . . . 86
WLAN adapter
troubleshooting . . . . . . . . . . . . . . 59
WLAN Autochannel. . . . . . . . . . . . . . . 82
WLAN connection, problems with . . . 61
… 109 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM FritzBox 7113 Fon WLAN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM FritzBox 7113 Fon WLAN in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM FritzBox 7113 Fon WLAN

AVM FritzBox 7113 Fon WLAN User Manual - German - 137 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info