559288
74
Zoom out
Zoom in
Previous page
1/80
Next page
Troubleshooting
74 FRITZ!X USB – 8 Support
Automatic outside dialing is deactivated for your extension,
and you hear a busy signal 30 seconds after picking up the
handset or switching on your fax machine
This is not an error. FRITZ!XUSB sounds the busy signal if
your handset is off the hook for 30 seconds and no number
is dialed. Dial the desired phone or fax number within 30
seconds.
The extension does not ring for an incoming external call
z Check whether the terminal device that you expect to
receive an external call is connected to the right
extension. Then make sure that the MSN which your
caller is dialing is assigned to that extension. If not,
either connect the terminal device to the extension to
which the MSN is actually assigned, or assign the MSN
to the extension to which the terminal device is actually
connected.
z Check whether the extension has been assigned an
MSN as its outgoing Caller ID, but not as a dial-in
number. In order for the extension to ring, you must
either assign it a valid MSN as a dial-in number, or clear
all of its MSN settings, both outgoing Caller ID and dial-
in numbers.
z Check whether the FRITZ! modules respond to incoming
calls.
All incoming calls are answered by the integrated ISDN-
Controller
Check the program settings in FRITZ!fax and FRITZ!fon. Is
FRITZ!fax standing by for incoming calls? If you have selected
the call acceptance option “Answer all incoming fax calls” on
theISDN settings page, then no calls can be answered by
FRITZ!X USB’s analog extensions.
If FRITZ!fon is standing by for incoming calls and you have
selected the call acceptance optionAll incoming calls” on
the “ISDN” settings page, then FRITZ!fon takes all incoming
calls after a certain delay. In this case, no calls can be
answered by FRITZ!X USB’s analog extensions. The delay
F!XUSB-e.book Seite 74 Mittwoch, 8. November 2006 2:23 14
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM FRITZ X USB v3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM FRITZ X USB v3.0 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM FRITZ X USB v3.0

AVM FRITZ X USB v3.0 User Manual - German - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info