559288
54
Zoom out
Zoom in
Previous page
1/80
Next page
Updating the PBX Software
54 FRITZ!X USB – 6 Configuring FRITZ!X USB
z
From the “Service” area the FAQs may be accessed.
These lists of Frequently Asked Questions along with
their answers present concrete support suggestions
and tips. Solutions to concrete problems are offered
here.
z The latest driver software and software for your PBX can
be downloaded from the “Download” section.
Performing the Update
Once you have loaded new firmware on your computer and
unpacked it (by double-clicking), proceed as follows:
1. Start the configuration software by selecting “Start /
(All) Programs / AVM / FRITZ!X”.
2. Select the “Update” settings page in FRITZ!X.
3. In the text field, enter the path to the location where
you have saved the update file locally. This entry can
also be selected using the “Browse ...” button. The file
ends with the suffix “.dat”. If you clicked “Browse...”,
the lower window will report whether the selected file is
a valid update file, and, if so, which version it contains.
If the update file is a later version than the currently
active firmware, it is recommended that you install the
update.
4. Then click the “Update” button to perform the update.
A warning message appears. If you are sure you want to
perform the firmware update, confirm the message. If
the update version is older or as old as the version
installed on your computer, you will also be prompted
to confirm that the update should be performed.
Do not disconnect FRITZ!X USB from the computer during
a firmware update, and do not unplug the FRITZ!X USB
power cord! If the firmware update is interrupted, your
FRITZ!X USB may become unusable! In that case, repeat
the update procedure.
A message indicates that the update has been completed
successfully. The PBX is then reset and its new version
number is displayed.
F!XUSB-e.book Seite 54 Mittwoch, 8. November 2006 2:23 14
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM FRITZ X USB v3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM FRITZ X USB v3.0 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM FRITZ X USB v3.0

AVM FRITZ X USB v3.0 User Manual - German - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info