559288
19
Zoom out
Zoom in
Previous page
1/80
Next page
Connecting the Cables
FRITZ!X USB – 2 Hardware Installation 19
2.2 Connecting the Cables
Proceed as follows to connect the necessary cables:
1. Position your FRITZ!X USB so that the sockets on the
back panel are facing you.
2. To connect FRITZ!X USB to the ISDN line, take the ISDN
cable from the package. Plug one end into the jack
labeled “ISDN” at the right end of the FRITZ!X USB
connector panel. Plug the other end into an ISDN jack of
your ISDN line.
3. Remove the enclosed USB cable from the package. The
USB cable has two different plugs: one that is flat and
square (known as the Series-A connector) and one that
is rectangular (known as the Series-B connector).
Plug the rectangular connector into the USB socket of
your computer or your USB hub.
Then insert the square connector into the USB socket of
FRITZ!X USB.
4. To connect FRITZ!X USB to the power supply, take the
AC power adapter from the package. Insert its RJ45 plug
in the jack labeled “POWER” at the left end of the
FRITZ!X USB connector panel. Plug the other end into an
AC power outlet.
Use only the mains adapter included with delivery. The
use of other adapters may cause
malfunctions
.
5. Now observe the LEDs on your FRITZ!X USB. The green
“Power” LED should light up, indicating that FRITZ!X USB
is operational.
FRITZ!X USB is ready for operation. The PBX does not have
an on/off switch.
Upon completion of the hardware installation, FRITZ!X USB's
default factory configuration settings are active. To configure
your FRITZ!X USB according to your personal requirements,
please see the section “Configuring FRITZ!X USB” from
page 44.
F!XUSB-e.book Seite 19 Mittwoch, 8. November 2006 2:23 14
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM FRITZ X USB v3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM FRITZ X USB v3.0 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM FRITZ X USB v3.0

AVM FRITZ X USB v3.0 User Manual - German - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info