559542

AVM Access Server Manual

137
Zoom out
Zoom in
Previous page
1/142
Next page
AVM Access Server – Glossary 135
The responses are therefore “spoofed”, or generated at the local end
using the remote client’s source address. If the ISDN connection is
physically active, the packets can be sent over the ISDN line. As soon
as the physical connection is interrupted by the inactivity timeout, and
as long as the logical ISDN connection persists, the remote access soft-
ware answers the packets locally, simulating the existence of a physi-
cal connection to the remote site. Once the physical ISDN connection
has been dialed up again due to user data, spoofing stops and the
overhead packets are transported over ISDN again.
The spoofing mechanisms to be used are negotiated with the remote
client on connection set-up in accordance with the PSCP Draft. If the re-
mote client does not support spoofing, the function is not activated.
Subnet mask
Subnet masks are used in “classless inter-domain routing” (CIDR) to
define a non-standard boundary between the host address and net-
work address components of an IP address. The network address is the
part of the address that is the same for all nodes in a network. The sub-
net mask is composed of ones in the positions of all network address
bits and zeroes in the positions of all host address bits. Subnet masks
are written either in dotted-decimal notation, like the IP address itself
(example: 192.168.10.1/255.255.255.0), or simply as the number of
one-bits in the mask (192.168.10.1/24). For example, a Class A Internet
address, which has a standard network address component of eight
bits (i.e., the subnet mask 255.0.0.0), can be used with a subnet mask
of 16 bits (255.255.0.0) as a quasi-Class B address, or with a 24-bit
… 137 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM Access Server at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM Access Server in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM Access Server

AVM Access Server User Manual - German - 157 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info