559542
49
Zoom out
Zoom in
Previous page
1/142
Next page
Step by Step
AVM Access Server – 4 AVM Access Server Use Scenarios 47
4. Enter the following settings at the two locations:
The default gateway entry can be any IP address in the AVM
Access Server’s subnetwork.
5. Confirm by clicking “OK”.
6. If want to use any other additional LAN adapters with the AVM
Access Server, you must enter a fixed IP address for each such
adapter as described above.
B Install the AVM Access Server
Install the AVM Access Server as described in the section “Installation
and Initial Configuration: An Example” on page 15.
After the AVM Access Server has been installed and the computer re-
started, the AVM Access Server Configuration Wizard starts automati-
cally. In this scenario, the Configuration Wizard is only used to config-
ure the ISDN-Controller.
C Configure the ISDN-Controller for the Appropriate Line Type
The AVM-ISDN-Controller B1, C2 or C4 must be configured to use its
special driver software for the “point-to-point BRI”. Please observe the
instructions in the manual accompanying your ISDN-Controller.
1. In the Configuration Wizard’s sign-on dialog, click “Next”.
2. In the dialog that prompts you to “Select the ISDN and ADSL-Con-
trollers ...”, select the AVM ISDN-Controller C4 in the list and click
“Properties”.
3. Activate the “Point-to-point BRI” option and confirm the setting by
clicking “OK”.
4. In the dialog that asks “How should the AVM Access Server con-
nect to the Internet?”, select the option “Do not set up Internet ac-
cess”.
5. In the “Access for remote users” dialog, disable the two options
“Over the Internet (VPN)” and “Direct ISDN dial-in”.
In Berlin In London
IP address 192.168.10.1 192.168.20.1
Subnet mask 255.255.255.0 255.255.255.0
Default gateway 192.168.10.2 192.168.20.2
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM Access Server at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM Access Server in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM Access Server

AVM Access Server User Manual - German - 157 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info