764765
14
Zoom out
Zoom in
Previous page
1/32
Next page
14
Here are some useful tips to help you to diagnose and rectify common sources of
trouble.
Problem Cause Solution
Control panel
screen does not
operate
Check power source
Power failure
Reset the RCD plug / Check if the wiring system is adapted to
the power of the pump unit.
Call for service if it does not reset
SPA pump does not
heat properly
Temperature set is too low Set to a higher temperature
Filter Cartridge is dirty Clean or Replace the cartridge (see chapter 5.2)
Too low water level Fill water to minimum water level
Heating element defective Call for service
Bubble massage
system does not
work
Pump is overheating Cut off the power and wait until the pump has cooled.
Auto shut-down feature (30min) is
activated Press the bubble button to reactivate
Malfunction of the pump unit Call for service if it does not reset
Water ltration does
not work
Filter Cartridge is dirty Clean or Replace the cartridge (see chapter 5.2)
Inlet and outlet blocked Clean the inlet and outlet
Air inside the pump Fill water to minimum water level
Malfunction of the pump unit Call for service if it does not reset
Pump leakage
Adaptor seal improperly Replace the seal in the right position
Water leakage from pump body Check the pump body, call for service
Spa pool leakage Spa pool is torn or punctured Use provided repair kit (see chapter 5.4)
Water is not clean
Insufcient ltering time Increase the ltering time
Filter Cartridge is dirty Clean or Replace the cartridge (see chapter 5.2)
Pool lled water quality Change the pool water completely
Improper water treatment Refer to the chemical manufacturer’s instructions
CHG FIL
After 150 cumulative hours of ltration operations, an audible alarm will sound and the LCD display will
show the characters CHG, followed by FIL, to remind you to change or clean the lter. You can hold
the ltering button 5 seconds to turn off the buzzing. The ltering system will turn off, you can press the
button to active the ltering system again.
6. TROUBLE SHOOTING
6.1. Troubleshooting
14


Need help? Post your question in this forum.

Forumrules
1

Forum

avenli-spa-venice

Reset search

  • how do i get an impeller mine is broken and my spa no longer works Submitted on 30-8-2022 at 18:39

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Avenli Spa Venice at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Avenli Spa Venice in the language / languages: English as an attachment in your email.

The manual is 5,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Avenli Spa Venice

Avenli Spa Venice User Manual - German - 9 pages

Avenli Spa Venice User Manual - Dutch - 9 pages

Avenli Spa Venice User Manual - Polish, Swedish, Norwegian - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info