764770
16
Zoom out
Zoom in
Previous page
1/34
Next page
7. WARRANTY
If the screen displays an error code “Ex”, please refer to the table belo
w.
E3, E4, E5, E6 error code
If error code is still displayed on the control Box, please do the following instrutions :
1 - Check that the water line is between the high and low limit
s.
3 - Unscrew and clean the 2 nozzles (Entry and exit of water) i
nside the spa and remove wastes if necessary (Neaf, hairs, fur,
skin...
)
foreign matter.
Cut the spa again electrically for 5 minutes and re-connect it
, if the error code is still displayed on the control box please contact
the Service Center.
7.1. Error code
CodeSituation Problem CausesSolutions
E1 Not heating Not
heating properly.
Wrong temperature
control sensor.
Temperature control sensor short
circuit or open circuit.Contact service center.
E3 Not heating
properly.
High water tempera-
ture indicator.
E4
All functions do
not work, buzzing
warn.
Low water tempera-
ture indicator.
The pool water is lower than 2°C
(36°F).
water is between 2°C~44°C (36°F~111°F)
· If this does not solve the problem, refer
to the box below
E5
All functions do
not work, buzzing
warn.
High water tempera-
ture indicator. (122°F).
-
cian to reset the thermal cutout described
in next paragraph.
· If this does not solve the problem, refer
to the box below
E6
Not heating and
Buzzing warns.
Water pressure is
not big enough to
activate heating.
·Inlet or outlet on inner wall are
blocked.
·Filter cartridge is too dirty.
·Pool water does not reach mini-
mum water level.
·Do not release air from pump
Pump is wrong
·Clean inlet and outlet
·Add water to reach water level
·Do air release as outlined again
· If this does not solve the problem, refer
to the box below
1. The filled water is over 45°C
(113°F)
2.The filter cartridge was put on the wrong
suction fitting (higher suction fitting). 2.Put the filter cartridge on the lower suction
fitting.
1.Cut off the power,make sure the pool water is
between 2°C~44°C(36°F~111°F).If this does not
solve the problem, refer to the box below.
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Avenli Spa Osaka at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Avenli Spa Osaka in the language / languages: English as an attachment in your email.

The manual is 7,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info