765064
18
Zoom out
Zoom in
Previous page
1/39
Next page
18
MFP-20-GB(V1)
PART7-IN-SEASON POOL
MAINTENANCE AND WATER CARE
your local after sale service center if you want to get advice on any repair during the life of the pool kit.
4. If applicable, check your lter-pump cartridge every two weeks (or more frequently during periods of heavy usage) to verify
whether it needs to be cleaned or replaced. If your cartridge is no longer white in color, attempt to spray it clean with a strong
blast of water from your garden hose. If your cartridge cannot be cleaned in this manner, the cartridge must be replaced. Failure
to frequently clean and/or replace your cartridges will affect the effectiveness of your lter pump and could shorten its useful life.
5. If your pool system included a cover, try to keep your pool covered at all times when not in use. This will help keep the wind
and other elements from depositing dirt and debris in your pool, and will also prevent excess rainwater from overlling your pool.
6. Remind your family and friends to always hose or rinse off any dirt or tanning oil from their hands, feet, and body prior to
entering the pool.
7. It’s necessary to monitor the bolts and hardware of the pool (eg. rust stain) when possible.
8. Once your pool has been lled with water for the season, take note if your pool becomes overlled due to rainwater or ac-
cidental overll. If this should occur, it is important to drain or bale out the excess water as soon as possible. If it is an inatable
ring pool, the water level should never be higher than the bottom edge of the inatable ring.
PART8-TROUBLE SHOOTING
Repair Patch Instructions
(Small pinhole and small puncture leaks can be repaired with the included repair patch)
a) Locate the leak place.
b) Deate the air.
c) Clean the area surrounding the leakage and wipe up all water from the surface.
d) Take out the repair patch, cut it into required shape and size, which should be larger than the leaking area, put the
patch on leaking area and press tightly.
e) Wait 30 minutes for open-air drying of the repaired position.
If the damage is too big, we recommend using a Silicone or rubber based glue for repair.
Repair Glue Instructions
1 Locate the leak place.
2 Deateif necessary,and drain thoroughly
3 Clean the area surrounding the leakage and wipe up all water from the surface.
4 Thoroughly clean the area surrounding the leak .Cut a piece of repair material in round shape, which should be
larger than the damaged area.
5 Gluing (need to purchase adhesive separately) one side of the material patch to the repair area. Please notice the
material patch need to be applied glue evenly.
6 Put the patch on the damaged area and press tightly. Wait 12 hours for drying. After patch has dried, apply glue
around the edges for a complete seal (dry 4 hours) swimming pool storage.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Avenli 17728 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Avenli 17728 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info