Manual Avenli 17728-1 (page 13 of 39) (English, German, Dutch)

765065

Zoom out

Zoom in

1/39

MFP-20-GB(V1)

Step4. INSTALL HORIZONTAL BEAM

Step3. INSTALL THE U-TUBES

Slide combined beams into sleeve,the hole on the beams should face outwards.

Slide each U-tube through the bottom addition

connected belt

1. Insert Plastic Spring Pin into the U tube.

When the locks on the Plastic Spring Pin t the

holes on the edge of the U tube. It is properly

installed.

2. Insert U-Tube Joint into the U tube.When

the locks on the edge of the U tube fit the

holes on U-Tube Joint. It is properly installed.

PART4-SET UP THE POOL

BEAM A BEAM B BEAM C

For 18’ x 8.2’ x 39.5” / 18’ x 10’ x 48”, the combination is A-B-C

For the long side sleeve of the pool:

Step1. ACCOUNT FOR ALL PARTS.

Remove all the parts from the carton(s) and place them on the ground in the location where they are to be assembled

Check each part according to “PART REFERENCE” .Make sure all the pieces to be assembled are accounted for.

IMPORTANT: Do not start assembly if any pieces are missing. For replacement pieces call the Consumer Service

telephone number in your area.

The number of persons required for installation: 2 adult at least.

Total installation time except the time for site preparation and water lling : 45 minutes

Step2. INSTALL DRAIN VALVES COVER AND STOPPER

Make sure that outer drain plug is inserted into the outer drain cap and drain valve cover is screwed on tightly.Plug the con-

nection holes with the stoppers. (The out drain plug changes according to different size of pool.)

STOPPER Out Drain Plug A Out Drain Plug B

Drain Vavle Cover

BEAM E BEAM D BEAM C

For 13’ x 6.5’ x 39”(4.0m x 2.0m x 99cm), the combination is E-D-C

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Avenli 17728-1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Avenli 17728-1 Manual

Product: