528736
60
Zoom out
Zoom in
Previous page
1/74
Next page
Original Operating Manual 1-2013
60
Before working, remove the battery from the bike, to prevent unintentional driving
Loosen the wheel out of suspension by flipping the quick-release lever (180 °)
Turn the lever of the shaft counter-clockwise, until the wheel loosens enough, that it
can be removed from its holder (if necessary remove the axle, keep nut holding screws,
and remember position for re-installation)
By removing the wheel you should consider
- disc brakes at the wheel must be carefully pulled out of the caliper
- if a hub dynamo is present the connection terminals must be solved
- in the case of a V-brake, the brake shoes have to be solved (unhook the brake cable)
- if a derailleur gear is to decrease, the chain should be in the lowest gear or smallest
pinion and if necessary pull the shifter slightly back
- by a hub gear remove the shifter cable must be un-mounted and eventually the
position of an affixation nut is to be noted for re-install
The mounting and fixing of the wheels is in the reverse order
Screw up the eccentric bolt with the tension lever as far as a resistance is encountered,
then close the lever and check the tightness of the wheel (if not satisfying fix it again, re-
open, re-adjust and tighten)
IMPORTANT: After installation of the wheel check again if all devices are connected properly
including the chain, gear and brake cable, the rotor in the suspension is tight (cross shake), the
direction is correct (lift the wheel and turn) and the brakes work well with little sanding and if
any dynamo is connected to the lighting.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ave Hybrid 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ave Hybrid 2013 in the language / languages: English as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info