597347
39
Zoom out
Zoom in
Previous page
1/52
Next page
4400/6400 Page 39
15-601074 Issue 12b (07 February 2010)IP Office
DSS Key Overview: Admin Functions
DPkup
Answer a call currently ringing at another extension or group. This function can be programmed with or without a target
extension or group number. If programmed without a target number, the number should be dialed after pressing the
DSS key.
Drop
Clears the current connected call. Temporarily pauses the ringing of an incoming call. This function does not require any
data entered when programmed.
This feature is intended mainly for call center headset users and so returns silence rather than dial tone to the user.
GrpPg
Page a group. Those phones in the group that support handsfree auto-answer will hear the page call without having to
take any action. This function can be programmed with or without a target group number.
If programmed without a target group number, the group number should be dialed after pressing the programmed DSS
key.
HdSet
Activate headset mode. This function does not require any data entered when programmed. When this function is on, the
appropriate DSS key lamp is lit.
Hfans
Sets the phone to auto-answer internal calls after a single ring. This function does not require any data entered when
programmed. When on, the appropriate DSS key lamp is lit.
HGNS+
Put a specified hunt group into night service mode. This function requires entry of the hunt group number when
programmed.
Park
Park a call against another extension. This function can be programmed with or without a target extension number.
If programmed with a target extension number, pressing the DSS key when on a call will park that call against the target
extension number.
If programmed without a target extension number, pressing the DSS key when on a call allows entry of a target
extension number before parking the call against that extension.
The parked call indication received at the target extension will depend on the phone type. If the call remains parked for
too long it will ring at the target extension.
Prog
Program and re-label the default softkey functions. Program a phone number to dial against a DSS key (see Storing
Abbreviated dialling Under a DSS Key ).
RngOf
Switches the phones audible ringer on/off. This function does not require any data entered when programmed. The
appropriate DSS key lamp is lit whilst this function is on. Pressing the DSS key again, turns the function off.
SAC
Switches do not disturb on/off. This function does not require any data entered when programmed.
When on, the appropriate DSS key lamp is lit and N is shown on the display. All callers receive a busy tone or are
diverted to your voicemail, if enabled. Pressing the DSS key again, switches off do not disturb.
Spres
Replace the display of dialed digits with s characters. This function does not require any data entered when programmed.
When this function is on, the appropriate DSS key lamp is lit.
Timer
Starts a timer running on the phone's display. This function does not require any data entered when programmed. The
timer is reset whenever a new call is made or answered. When timer mode is selected the appropriate DSS key lamp is
lit.
TmDay
Replaces the user name and number details on the phone display with the date and time. This function does not require
any data entered when programmed.
When on the appropriate DSS key lamp is lit.
41
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Avaya 6408D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Avaya 6408D in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Avaya 6408D

Avaya 6408D User Manual - German - 62 pages

Avaya 6408D User Manual - Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info