6151
31
Zoom out
Zoom in
Previous page
1/70
Next page
Function Key Features Function Keys - Page 31
IP Office (R3.0) 4620SW + EU24 User’s Guide Function Keys - Page 31
40DHB0002USEP – Issue 1 (13th January 2005) Function Key Features
Group (#)
Answer or clear calls ringing a specific group.
This function requires entry of the group number (allocated by your System
Administrator). When programmed, the group name is then displayed next to the
key. This function can be programmed through the phone by the user using an
Admin 1 key and the group number.
A
appears against the group when calls to that group are ringing. Pressing
displays details of one of those calls and options to drop (Drop
) the call, answer
the call (Answn
) or exit the group monitor ( EXIT).
[User | Digital Telephony | Group]
User (#)
See the status of a specific user, call that user and pick-up calls to that user.
When programmed by your System Administrator (on the IP Office), the user name is
entered. That name is then displayed next to the
key. This function can also be
programmed through the phone by the user using an
Admin 1 key and then the
user number. Pressing the
key calls the user.
The when the user is called the user name is underlined with a
symbol beside it.
Press the
key next to the name. DkPickup appears against a call appearance key.
To pick up the call press this key.
If the System Administrator has setup group monitoring of the same user, pressing the
user key when the user is busy on a call displays several options. These are Drop
(end the user's call), Listn (listen to the call), and Aquir (takeover the call). If the
System Administrator has not setup group monitoring, then the options shown are Call,
Message, Vmail and CallB.
[User | Digital Telephony | User]
Absnt - Set Absent Text
Set the users current absence message setting.
This function is currently not supported on the 4620 telephone.
Acct - Account Code Entry (!)
Make a call using an account code or enter an account code during a call.
This function can be programmed with or without data. This function can be
programmed through the phone by the user using an
Admin key.
If programmed with data, the account code entered when programmed must match a
valid account code set on the telephone system. The
Acct key displays that
number.
If programmed without data, ENTER ACCOUNT is displayed after
Acct is pressed.
Enter an account code and press Set
.
If the account code entered does not match a valid account code set on the telephone
system, RENTER ACCOUNT is displayed.
An
Acct key can be pressed before or during a call.
[User | Digital Telephony | Emulation | Account Code Entry]
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Avaya 4620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Avaya 4620 in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Avaya 4620

Avaya 4620 User Manual - Dutch - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info