54081
39
Zoom out
Zoom in
Previous page
1/60
Next page
Program Abbreviated Dialing
Issue 1 July 2001
5-13
Program Abbreviated Dialing
To be programmable for abbreviated dialing, a Line/Feature button must be
administered for the Abbreviated Dialing feature. Note that two separate
procedures follow for programming Abbreviated Dialing numbers one for
programming Line/Feature buttons for abbreviated dialing using the Program
feature, and one for programming Line/Feature buttons for abbreviated dialing
using an AD Access Code.
Programming or re-programming a single
Abbreviated Dialing button on a
Line/Feature button using the Program feature
Use this procedure only if your System Administrator has programmed a
Line/Feature button for the Prog (Program) feature.
NOTE:
If you make a mistake while programming, you CANNOT move back a
space to erase it. Instead, press the # key or go on-hook to erase the entry
and start over.
1. Write down the outside numbers, extensions and/or Feature Access codes
you want to program. (Each AD button holds one complete phone number,
an inside extension or a Feature Access code.)
2. To enter programming mode, press the Line/Feature button to which your
System Administrator has assigned the Program Abbreviated Dialing
feature.
The phone goes off-hook, the Speaker indicator lights and the message
"Press button to program" displays.
3. Press the pre-administered Line/Feature button you want to program for
Abbreviated Dialing.
The message "Enter number" displays.
4. Enter the outside number, extension or Feature Access Code you want to
store. An automatic dialing number or code can be from 1 - 16 digits. (24
digits are allowed if the number is associated with an AD list; see your
System Administrator for information.) When programming an outside
number, be sure to include the trunk code, for example, a "9" if applicable.
5. Press the # button to save the number or code.
A three-beep confirmation tone indicates the AD number has been stored
and the message "Number saved" displays for one second.
6. Record the number, code or other identification on the label next to the AD
button.
7. Repeat Steps 1 through 6 to program additional AD numbers on
Line/Feature buttons.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Avaya 4606 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Avaya 4606 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info