601693
9
Zoom out
Zoom in
Previous page
1/28
Next page
600 Series
LOAD DIAGRAM
The lifting capacity of the loader is limited by the possibility of tipping around the front axle. The diagram
below shows the tipping loads and max. allowed loads in different loading situations on an even level surface
with the loader in maximum articulation (i.e. minimum restoring moment).
The diagram can be interpreted as follows:
The diagrams show tipping load and max. load with the load at different distances from the front axle of
the loader
Example: If the center of gravity of the load is 750 mm in front of the front axle, max. load is about 820 kg
with a driver weighing 75 kg and with the 170 kg integrated rear weight mounted on the loader.
Max. load should be reduced when the load is farther away from the attachment coupling plate.
Tipping load and max. load depend both on the weight of the driver and the eventual extra weights mounted
on the loader.
Please note that the diagrams are based on the machine operating on a level, even and firm supporting
ground. Loads should be significantly reduced when operating on gradients and/or on soft ground.
The loader is equipped with a load sensor system, which gives an audible warning signal and an indicator
lights up in the dashboard when tipping load is being approached. See also page 23.
ALWAYS KEEP AND TRANSPORT THE LOAD AS CLOSE TO THE GROUND AS POSSIBLE
NEVER TAKE A HEAVY LOAD ON THE LOADER FROM HIGH LEVEL - E.G. FROM TRUCK,
SHELF ETC. - RISK OF TIPPING OVER!
ALWAYS PUT DOWN THE LOAD BEFORE LEAVING THE MACHINE
WHEN LOADING ALWAYS KEEP THE LOADER FRAME AS STRAIGHT AS POSSIBLE
AVANT 600 series load diagram
Tipping load with the loader
in max. articulation
Rear weight 170 kg
Driver 75 kg
Load diagram
9
Max. load, ISO 14397-1
The loader in max. articulation
Rear weight 170 kg
Driver 75 kg
Distance from front axle mm
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Avant 630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Avant 630 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Avant 630

Avant 630 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info