814910

Autoterm modem QSTART Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
– 3 –
4.1. SIM Card Setup
First of all put new SIM card in phone, remove PIN code and delete all
preset contacts from it.
Attention! SIM card has to be without voicemail. Ask your network
provider to remove voicemail option from your SIM card.
To insert MICRO-SIM card unscrew two screws from bottom of modem and
take off top casing of modem.
Insert the SIM card in the slot as
shown in Fig.2. with contacts facing
down, push carefully until a click.
Then it is secured in its position.
To assemble modem back, do
previous steps backward.
Figure 2 shows an internal view of the
modem. The following are located on
the modem:
- 6-pin cable connector (1);
- antenna connector (2);
- SIM card slot (3).
Fig. 2. To insert SIM card
4.2. Modem Connection
To set the modem up, connect the antenna, connect the harness to the modem and place
the modem in a clean location. Mount the antenna in an unobstructed location (for example,
on the windshield).
To connect the cable to the modem, push it in the connector until a click, so the cable
connector is fixed in place.
To disconnect the cable, depress the connector latch.
To connect the modem to the product, disconnect the control panel from the product
harness and connect the harness to the modem as shown in Fig.3.
After connecting the modem to the power harness (modem power supply), the LED
closest to the antenna connector starts to glow. The second LED will start to blink (connection
and data exchange). When second LED (green) start to blink slowly (once every 3 seconds)
modem has established network connection.
1
3
2
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Autoterm modem QSTART at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Autoterm modem QSTART in the language / languages: English as an attachment in your email.

The manual is 0.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info