•The relevant safety precautions must be observed when working with
coolant liquids and electrical and fuel systems when installing and
dismantling the heater.
•Do not disconnect power from the heater before the purge cycle
ends.
•When the heater has been switched off, do not switch it on again for
5-10 seconds.
•Due to poisonous exhaust gases and the risk of suffocation, DO
NOT use the heater in closed and/or unventilated places (e.g.
garage, workshop, etc.)
•Do not step on the heater or put any objects on it and in it.
•Electric wiring, the air intake, and the fuel pipe must be protected
from contact with sharp edges of vehicle structures.
•If any work was done on a cooling system (repair or replacement of
coolant), it is necessary to bleed the system.
•For safety reasons, contact the service shop to troubleshoot the heater
if it fails to launch twice in a row.
•In case of faults in the operation of the heater, contact only specialized
repair organizations authorized by AUTOTERM.
