814914
6
Zoom out
Zoom in
Previous page
1/16
Next page
6
When an operation mode is active, the respective symbol is displayed on the main screen
(under the current time) and it works as a quick menu. By rotating the knob three options can
be accessed:
Active operation mode
settings
Shut off the heater
Access the main menu
Confirm selection by pressing the knob.
1.2. ROTARY KNOB
The rotary knob is the main button for navigation through the interface.
When control panel is active pressing the knob enters the main menu. After that pressing
the knob confirms selected item or setting.
Turning right selects next item or increases value of selected setting.
Turning left selects previous item or decreases value of selected setting.
While control panel is in sleep mode, turning the knob to either side allows to change the
set temperature/power level of the active mode. Changes are applied without
confirmation.
1.3. BACK BUTTON
Back button is used to return to the previous screen by pressing it once.
1.4. QUICK BUTTON
Quick button can be used to start or stop the heater without entering the main menu or quickly
enabling or disabling timers.
While the heater is off, pressing the button once opens the “Heating” menu.
While the heater is off, long-pressing the button for 2 seconds starts the heater with
previous settings (Display message: “Starting…”).
While the heater is operating, long-pressing the button for 2 seconds switches off the
heater (Display message: “Switching off…”).
While the heater is operating (and in sleep mode), pressing the button once opens the
settings of the active operation mode. Changes are applied after confirmation.
In the menu “Timers” pressing the button once enables/disables the selected timer (for
this action timer has to be set beforehand).
1.5. LED INDICATORS
LED indicators are used to indicate the operating mode or status of the heater:
RED – heater is working in heating mode;
BLUE – heater is working in ventilation mode;
GREEN – heater is switching off (purge mode);
RED (blinking combined with display message) – an error has occurred;
LIGHT GREEN (one blink every 5 seconds) – a timer has been enabled.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Autoterm Comfort Boiler Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Autoterm Comfort Boiler Control in the language / languages: English as an attachment in your email.

The manual is 1.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info