558054
37
Zoom out
Zoom in
Previous page
1/48
Next page
Operators Manual 33
A FRESH APPROACH TO VENDING
2. To enable the DEX setting, select DEX. A filled radio
button indicates that it is selected.
N.B. Even if the default is set to DDCMP, once the
controller detects a DEX activity, it will automatically
switch to the other mode. However, setting the
default to the correct protocol will speed up response
time.
3. To save the new parameter to the machines memory and return to the DTS Menu
screen, press Up One Level.
The operator can now download data from the machine by plugging a DEX enabled
device into the DEX port (J36) on the I/O board, located on the rear of the door.
DTS Audit List
From this sub-menu the operator can select which data is transferred from the machine to a
DEX/DDCMP data carrier:
1. Select DTS Audit Data. The LCD will display the
screen as shown.
All data and events fields within a vending machine are
assigned a unique code determined by the Standard.
2. From this sub-menu the operator can choose which
fields will be available for download by selecting them
from the list displayed, an will appear in each
adjacent box indicating that it is selected. Continue
until all required fields have been selected.
CA304 Data Type
This sub-menu determines whether the data will be displayed as currency or numerical, for
example, assuming that the value of pound coins in the machine is £3.00, when set to currency
CA304 will read 300 in the DEX/DDCMP report. When set to numeric it will read 3. To change the
Data Type see 6.4 Entering or Updating Parameters. When complete, press Up One Level to
return to the DTS menu screen.
Data Reset Mode
This field can be set to either AUTO or SAVE from within the sub-menu. When set to AUTO, all
resettable data will be reset after a successful read. To change the Data Reset Mode see 6.4
Entering or Updating Parameters. When complete, press Up One Level to return to the DTS
menu screen.
Event Reset Mode
This field can be set to either AUTO or SAVE from within the sub-menu. When set to AUTO, all
event data will be reset after a successful read. To change the Event Reset Mode see 6.4
Entering or Updating Parameters. When complete, press Up One Level to return to the DTS
menu screen.
Section 7 - Operatorʼs Program
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Autobar Infinity at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Autobar Infinity in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Autobar Infinity

Autobar Infinity Installation Guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info