586068
31
Zoom out
Zoom in
Previous page
1/145
Next page
Diagnostics Operations Establishing Vehicle Communication
24
6. If Manual is selected, you need to set the IP address on your own.
NOTE: If you are not sure about the specific IP address values, please
contact your network administrator.
7. Tap Apply to set up the wired network connection.
When the wired network is successfully connected, the connection status is
displayed as Connected, and the two status lights at the corners alongside the
Ethernet Ports on the display tablet illuminate. The solid amber light indicates
steady connection, and the flashing green light indicates active
communication, between the units. The VCI navigation button at the bottom
bar shall display a green tick icon after a few seconds, indicating the MaxiSys
Pro diagnostic platform is ready to perform vehicle diagnosis.
Refer to 10.2 Wired Network Connection on page 92 for additional information.
NOTES: After the MaxiSys/MaxiSys Pro diagnostic platform has successfully
established communication with the vehicle, the VCI device makes a long
beep sound for confirmation.
4.1.3 No Communication Message
A. If the MaxiSys Display Tablet is not connected to the VCI device, an
“Error” message displays. An “Error” message indicates the display
tablet is not communicating with the VCI device, and so cannot gain
access to the vehicle control module. In this case, you need to do the
following check-ups:
Check if the VCI device is powered on.
In case of wireless connection, check if the network is configured
correctly, or if the right device has been paired.
If during the diagnosis process, the communication is suddenly
interrupted due to the loss of signal, check if there is any object that
causes signal interruption.
Check if the VCI device is properly positioned. It is recommended to
put the VCI device with the front side up.
Try standing closer to the VCI device to obtain more stable signals,
and faster communication speed.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Autel MaxiSys at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Autel MaxiSys in the language / languages: English as an attachment in your email.

The manual is 5,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Autel MaxiSys

Autel MaxiSys User Manual - German - 149 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info