586064
67
Zoom out
Zoom in
Previous page
1/79
Next page
65
Verify that the ignition is ON.
Check if the scan tool’s OBD II connector is securely
connected to the vehicle’s DLC.
Check that the park brake is released.
Turn the ignition off and wait for about 10 seconds. Turn
the ignition back to on and repeat the procedure.
If the “LINK ERROR” message does not go away, then there
might be problems for the scan tool to communicate with the
vehicle. Contact your local distributor or the manufacturer’s
customer service department for assistance.
B. Activate Brake
CAUTION: The EPB system must be activated after finishing
the maintenance/service work on the brakes. Make sure the
vehicle is properly blocked before activation of the system.
1 To close the brake pads after finishing the
maintenance/service work on the brakes, use UP/DOWN
scroll button to select Activate Brake from Special
Function menu, and press OK button.
Figure 6.41
2) Wait a few minutes while the device is activating the brakes.
When they are activated successfully, an Activate Brake
Done message comes up.
Special Function
1 .Deactivate Brake
2 .Activate Brake
3. Adaptation
4. Function Test
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Autel MaxiService VAG505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Autel MaxiService VAG505 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info