Manual Autel MaxiService EBS301 (page 35 of 59) (English)

586066

Zoom out

Zoom in

1/59

1) Use the UP/DOWN scroll button to select I/M Readiness from

Diagnostic Menu and press OK button. (Figure 5.3)

2) Wait a few seconds while the scan tool validates the PID MAP.

3) If the vehicle supports both types of tests, then both types will be

shown on the screen for selection. (Figure 5.20)

Figure 5.20

4) Use the UP/DOWN scroll button, as necessary, to view the status

of the MIL light (“ON” or “OFF) and the following monitors:

For spark ignition engines:

 MIS -- Misfire Monitor

 FUEL -- Fuel System Monitor

 CCM -- Comprehensive Component Monitor

 EGR – EGR System Monitor

 O2S -- O2 Sensors Monitor

 CAT -- Catalyst Monitor

 EVAP -- Evaporative System Monitor

 HTR -- O2 Sensor Heater Monitor

 AIR -- Secondary Air Monitor

 HCAT -- Heated Catalyst Monitor

For compression ignition engines:

 MIS -- Misfire Monitor

…………… I/M Readiness .

1.Since DTCs Cleared

2.This Drive Cycle

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Autel MaxiService EBS301 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Autel MaxiService EBS301 Manual

Product: