694960
68
Zoom out
Zoom in
Previous page
1/125
Next page
63
The ECM monitors driving style and selects a suitable time to employ
regeneration. Cars driven a lot at idling speed and low load will attempt to
regenerate earlier than cars driven more with high load and speed. In order for
regeneration to take place, a prolonged high exhaust temperature must be
obtained.
In the event of the car being driven in such a way that regeneration is not
possible, i.e., frequent short journeys, a diagnostic trouble code will eventually
be registered in addition to the DPF light and “Check Engine” indicators
displaying. A service regeneration can be requested in the workshop, using the
diagnostic tool.
Before performing a forced DPF regeneration using the tool, check the
following items:
The fuel light is not on.
No DPF-relevant faults are stored in system.
The vehicle has the correct spec engine oil.
The oil for diesel is not contaminated.
IMPORTANT: Before diagnosing a problem vehicle and attempting to perform
an emergency regeneration, it is important to obtain a full diagnostic log and
read out relevant measured value blocks.
NOTE
1. The DPF will not regenerate if the engine management light is on, or there
is a faulty EGR valve.
2. The ECU must be re-adapted when replacing the DPF and when topping
up the fuel additive Eolys.
3. If the vehicle needs to be driven in order to perform a DPF service, a
second person is needed for the function. One person should drive the
vehicle while the other person observes the screen on the Tool. Do not
attempt to drive and observe the scan tool at the same time. This is
dangerous and puts your life and the lives of other motors and pedestrians
at risk.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Autel MaxiCOM MK906 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Autel MaxiCOM MK906 in the language / languages: English as an attachment in your email.

The manual is 6,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info