Manual Austroflamm Yan Xtra (page 7 of 20) (English, German, French, Italian)

695806

Zoom out

Zoom in

1/20

english 5 Yan Xtra / Ray Xtra

1. TECHNICAL DATA

As a stove of construction type 1, it is possible to connect it

to the chimney together with an existing other stove or

another hearth for solid fuels, as long as the chimney

calculation complies with DIN 4705, Part 3.

TECHNICAL DATA

Yan

Ray

Height

1480 mm

1368 mm

Width

490 mm

634 mm

Depth

400 mm

472 mm

Weight

263 kg

327 kg

Weight HMS

115 kg

Flue pipe outlet diameter

150 mm

Nominal thermal output

7 kW

Max. thermal capacity

9 kW

Smallest heating capacity

3,5 kW

Room heating capacity (depending on

building insulation)

82–210 m³

2. IMPORTANT INFORMATION

The installation and operation information given here is of

general nature. National and European standards, local and

building regulations as well as fire prevention laws must be

observed during the operation of the stove.

General safety instructions for the

operation of your stove

 Read the entire manual before starting up your stove

thoroughly and observe the caution notices.

 Your heating unit must not be moved without approved

means of transport with sufficient load-bearing capacity.

 Your heating unit is not suitable to be used as a stand or

as a ladder.

 Please keep in mind that your

stove’s surface heats up considerably

during operation. We therefore

recommend wearing a safety mitten

when operating your stove.

 Attention – stove varnish is no rust prevention!

 Make your children aware of this particular danger and

keep them at a distance from the heating unit whenever it is

in operation.

 Only burn approved fuels and materials as listed in the

chapter “Clean Burning”.

 The burning or placing of flammable or explosive

materials, such as empty spray cans, etc. into the firebox as

well as the storage of such materials in the immediate

vicinity of your heating unit is strictly forbidden due to the

danger of explosion.

 Do not wear loose or flammable clothing when adding

fuel to the fire.

 Placing non-heat-resistant objects on the heating unit or

in the vicinity of the heating unit is forbidden.

 Do not lay laundry onto the stove for drying. Laundry

hung up to dry must be kept at a safe distance from the

stove because of the danger of fire.

 The wood stove is not suitable for long term heating.

 During the operation of your heating unit it is forbidden to

use flammable or explosive materials in the same or an

adjacent room to the one in which your heating unit is

located.

 The appliance must be operated with the stove door

closed.

 The stove door and all fittings for adjusting the stove

must be closed, if the appliance is out of use.

Setting up your stove

Required safety distances (Minimum distances –

see name plate - in Fig. 2)

a > 800 mm - towards the front in the radiated area

b > 100 mm – to the side

c > 110 mm – to the back

Make sure that the room in which the stove is set up has at

least one door or window into the outside or is directly

adjacent to such a room. Other fireplaces and extractor

hoods must not be operated in the same room as the stove.

Floor load capacity

Make sure that the load capacity of the supporting

construction is sufficient to carry the weight of the entire

unit, before the heating unit is installed.

Exhaust values for multiple use of the chimney in

accordance with DIN 4705, Part 3 and for the calculation of

the chimney measurements in accordance with DIN 4705,

Part 2

Fluegas mass flow

closed

5,4 g/s

Fluegas temperature

closed

340 °C

Minimum feed pressure

Nominal thermal output

closed

12 Pa

at 0.8 times n.

ther. outp.

10 Pa

Subject to technical and optical modifications. Formatting and printing errors excepted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Yan Xtra in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Austroflamm Yan Xtra Manual

Product: