810578
19
Zoom out
Zoom in
Previous page
1/74
Next page
Operating manual Ruby EN 7 | Requirements at the installation location
19
7 Requirements at the installation location
7.1 Requirements to be met by the installation room
Your pellet stove must not be set up in:
spaces in which the required combustion air supply is not guaranteed.
spaces which are generally accessible, in particular emergency exits (staircases in residential build-
ing with no more than 2 apartments are not included in general accessible spaces).
spaces in which easily flammable or potentially explosive substances or mixtures are processed,
stored or manufactured.
spaces, apartments or units from which air is extracted with the aid of ventilators, such as ventila-
tion- or hot-air heating installations, extractor hoods or exhaust air tumble dryers. Unless the safe
function of the pellet stove is ensured.
This is ensured if:
the systems only circulate air within a space.
the systems have safety features which autonomously and reliably prevent negative pressure in
the installation space.
simultaneous operation of the fireplace and the air-extracting system is prevented by safety
features.
the flue gas routing is monitored by a particular piece of safety equipment.
Floor load-bearing capacity
Before installing, verify whether the load-bearing capacity of the substructure can withstand the weight
of your pellet stove.
The installation surface for the pellet stove must have an appropriate load-bearing capacity. If an
existing design does not fulfil this condition, suitable measures (e.g. a plate for distribution of the
load) must be taken to meet it.
7.2 Chimney requirements
To protect your own safety, national and local regulations exist governing the connection of flue pipes
to the chimney. Your pellet stove is set up at the factory for connecting to 130 mm flue diameter / top.
With minor modifications on site it can also be connected at the rear. When connecting with other pipe
diameters, you should obtain the prior approval of your chimney sweep. Your specialist pellet stove
dealer will be familiar with the guidelines. For your own safety the flue connection should be carried
out by a specialist.
7.3 Combustion air / Outside air supply
This pellet stove requires sufficient combustion air to operate smoothly. With dense building envel-
opes, the room air is insufficient. For this reason, the combustion air required must be supplied from
outside.
Your pellet stove is prepared for this situation (balanced flue operation). The external air supply pipe
must be connected tightly to the pellet stove (e.g. a pipe clamp or airtight adhesive tape). Your dealer
will advise you on the correct connection.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austroflamm Ruby at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Ruby in the language / languages: English as an attachment in your email.

The manual is 26.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Austroflamm Ruby

Austroflamm Ruby User Manual - German - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info