815460
18
Zoom out
Zoom in
Previous page
1/52
Next page
3 english
2.5 Lighting the fire
To operate the heat system correctly and safely, it is important to ensure that the chimney generates
the required delivery pressure. This must be checked particularly at each initial operation (after the
summer season) and in the transition period (e.g. strong wind, fog, etc.). For this purpose, hold a match
or lighter flame to the opened fire door. If the flame is not drawn into the opening, a natural draught
must be created in the chimney through a strong build-up of heat (e.g. by paper or kindling). If this does
not succeed, the fireplace heater must not be put into operation!
Move the combustion air flap control to the leftmost position "+" (see p.1 / Fig.2)
Open damper flap, if present, completely (see Fig.6).
Place 2 - 3 pieces of firewood (beech, oak, birch) crosswise in the bottom of the firebox (see Fig.7 - (1).
Place the finely split softwood on top (2). Place a lighting aid (3) in the middle and light it. Never use
petrol, spirit or similar substances to light the fire!
When after a few minutes the firewood has burnt well all around (see Fig.8), close the combustion air
flap by approx. 50% (set the control to the middle position - see page 1 / Fig.2) or close the damper
flap, if present, by 50% (handle to the left - see Fig.6).
Fig. 6: damper flap Fig. 7: before lighting Fig. 8: display of flames
Turn to the right -> flap opens
Turn to the left -> flap closes
2.6 Heating
The combustion air flap should not be more than 50% open (control in middle position), otherwise the
fuel fed will burn away too quickly, resulting in excessively high temperatures on the appliance.
The damper flap, if present, should be 50% open, otherwise the fuel fed will burn away quickly.
Open all existing warm air grilles completely.
Add more wood after approx. 45 to 60 minutes.
2.7 Piling up the fire
Please note that the fireplace inserts are not permanent fireplaces. They are temporarily burning
fireplaces, i.e. for longer lasting operation, fuel has to be added repeatedly.
Do not wear wide or easily flammable clothing when adding fuel to the fireplace inserts.
.
The right time to pile up the fire is when the fuel has burnt down almost to the embers. The second top-
up should be added approx. 45 minutes after the first. In most cases, it is not necessary to add any
more wood.
If you still wish to continue operating the unit, the feeding intervals must be extended and the feeding
quantity reduced (by 0.5 - 1 kg).
Symbolic image
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austroflamm Miu at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Miu in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info