Manual Austroflamm Lounge Xtra (page 10 of 20) (English, German, French, Italian)

694333

Zoom out

Zoom in

1/20

Lounge/Lounge Xtra 8 english

5. LOUNGE/LOUNGE XTRA Accessories

Xtra heat storing technology

The model Lounge Xtra has been equipped with the unique Xtra heat storing technology. This technology is based on the

patented Heat Memory System, but also on the special flue gas guidance and the convection air which can be regulated or

shut off completely. Consequently a fast heating system is being combined with an extraordinarily efficient heat storing.

The convection air can be regulated according to demand with the attached lever (see picture). The more the convection air

outlets of the top plate are open, the faster heat but less heat storing can be reached. A closed top plate will however lead to

slow heat and longer heat storing.

Our hint: while the fire still burns let the convection air outlets open; close them after the fire has burnt down in order to reach

a steady heat emission.

Self-locking door mechanism

In order to ensure a correct self-locking door mechanism it is necessary, to let the door fall into the lock with an opening

angle of min. 30 °.

Operation with external air supply

The German institute for constructional engineering (DIBT) has given the Lounge/LoungeXtra the general technical

approval for operation with external air supply. If the combustion air is being supplied directly to the furnace by an air-tight

pipe including closing mechanism from the outside, then the stove may be used in residential property with mechanical

ventilation.

If the stove in being used like that, a multiple stove installation on the same chimney is forbidden.

This stove has been approved by the German DIBT.

problem

possible reason

solution

door glass gets sooty too fast

bad chimney draught

generally: door glasses must be cleaned with

Austroflamm glass cleaner from time to time

(depending on the frequency of use)

contact your chimney sweep (elongate

chimney/draught metering)

incorrect use of the combustion

air supply lever

please operate air lever according to user's

instructions (if secondary air is closed, the door glass

soots rather fast)

wood logs are too large

keep to the max. fuel quantity according to user's

instruction

operating temperature was not

reached

more fuel, use dry wood (< 15 % residual moisture),

attend air regulation

stove does not get enough

combustion air

chimney draught not sufficient

contact your chimney sweep (elongate

chimney/draught metering)

stove is sooted inside

more fuel, use dry wood (< 15 % residual moisture),

attend air regulation

stove smells strongly and there

is smoke on the outside

surface

baking phase of the varnish

there may be some odour development during the first

operations

stove is dusty/dirty

cleaning before the heating season starts!

exhaust gas emission while

putting more wood on the fire

and during operation

chimney draught no sufficient,

flue pipe connection leaky

inspect joints and seal up again if necessary

check chimney draught, examine operating - for info

video follow:

http://www.austroflamm.com/de/Video/index.html

the stove door was opened

before the wood has burnt down

to embers

put more fuel wood into the combustion chamber only

if there are only embers left (no more visible flame)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Lounge Xtra in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Austroflamm Lounge Xtra Manual

Product: