Manual Austroflamm IRONY XL (page 10 of 21) (English, German, French, Italian)

696815

Zoom out

Zoom in

1/21

english 8 Irony XL

5. ASSEMBLY- / DISMANTLING INSTRUCTIONS

Transport safety unit

Follow the procedure below to remove the

transport safety unit:

• Remove the wood storage tray by pulling the

tray out to the stops and then lifting tray and

removing it completely from its position.

• Now remove the two screws with which the

Irony stove is attached to the shipping pallet.

The transport safety unit for the sliding door is

removed by cutting through the cable binder that

can be seen in the wood storage compartment at

the left rear.

Fig. 6: Rear wall

Cladding

The following cladding units can be removed for

easier transport:

1. Lift and remove the cover (Item 3).

2. Remove the wood storage tray (Item 5) by

pulling the tray out of its position.

3. Lift the ash collection tray (Item 6) from its

position on the tile support (Item 7).

4. Remove the left and right ceramic shells (Items

8 and 9) by lifting them out of position.

5. Remove the eight screws (Item 4) – four on

each side, left and right – from the rear wall

(Item 1).

6. Remove the complete cladding unit (Item 2) by

lifting it out of position.

The above components are re-assembled in the

reverse order.

Fig. 7: Cladding components

6. Irony XL equipment

This model is available with either lateral or sliding

door.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm IRONY XL in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Austroflamm IRONY XL Manual

Product: