815458

Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II Manual

110
Zoom out
Zoom in
Previous page
1/122
Next page
16 | Help EN Operating manual Fireplace inserts slied flat + II
110
Problem Cause Solution
Ceramic windows become sooty
very quickly
Unsuitable wood used Use dry unrefined wood. See inform-
ation about this in the Fuel section
Operating temperature not reached Bring fireplace insert to the operat-
ing temperature
Sooting up of the window after 8- 10
hours of fires is normal
Chimney draft too low Contact chimney sweep
16.1 Firebox lining
The lining of your fireplace insert consists of Keramott, a high-quality material with special combustion
properties and an attractive appearance. During or after operation this lining may have superficial hair-
line cracks, which do not however affect functioning. Replacement of such parts is not required!
16.2 What to do in the event of a chimney fire
If fuel used is incorrect or too moist, then due to deposits in the chimney this may lead to a chimney
fire.
1) Call the fire department and the district master chimney sweep!
2) Close the combustion air.
3) Enable access to the cleaning openings (e.g. basement and attic).
4) Remove all flammable material from the chimney.
5) Inform your district master chimney sweeper before recommissioning your fireplace insert and
have your chimney checked for any damage.
16.3 What to do in the event of faults
Should faults occur on the fireplace insert, your dealer will require the following details:
• Serial number and appliance model as per the nameplate
• Original invoice (date of sale)
16.4 What if....?
... the fire smoulders or goes out on its own?
• Is the existing throttle valve open?
• Is the existing start-up flap (for an installed heat recovery surface) in the correct position?
• Is the air controller open (+)?
• Are you using dry wood?
• Is the external temperature too high (>15C°)?
... the room is not sufficiently warm?
• Are the convection air grilles opened?
• Is the existing start-up flap conducting the heating gases over the heat recovery surfaces?
• Is the chimney draft too high?
... the fire combusts too quickly and uncontrolled?
• Has the combustion air supply been throttled after the operating temperature has been reached in
the firebox (+ / -)?
• Are the seals on the inside of the door frame in condition all the way round?
… 110 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II in the language / languages: English as an attachment in your email.

The manual is 14.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II

Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II User Manual - German - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info