815458
104
Zoom out
Zoom in
Previous page
1/122
Next page
14 | Operation EN Operating manual Fireplace inserts slied flat + II
104
14.3 Fuel
NOTICE
To avoid damage you must NEVER operate your fireplace insert a greater quantity of fuel than that
specified in this manual!
Approved fuel
Dry, properly stored, unrefined log (preferably hard wood) is permitted as fuel for our hybrid stoves
Round wood must be split at least once so that it lights better. The diameter of the split piece of wood
must not exceed 7 cm.
Maximum fuel quantity
Every fireplace insert is designed for a maximum fuel quantity: see Technical Data section.
Clean combustion
To achieve clean, low-emission combustion, dry (relative wood moisture < 20 %) and untreated fire-
wood must be used. (In addition to a lower calorific value, wet wood causes the panes of your fireplace
insert to become tarnished with soot more quickly). Secondly, the correct amount of firewood must be
burnt. Heat responsibly with dry firewood to protect both people and the environment.
Fuel
Only burn the recommended fuel.
Explosive substances
It is strictly forbidden to burn or introduce highly flammable or explosive substances (empty aerosols
and the like) into the firebox or to store them in the immediate vicinity of your stove. Risk of explosion!
14.4 Firing
To ensure the heating appliance operates correctly and safely, it is important that the chimney gener-
ates the required draught. This must be checked in particular for each initial commissioning (e.g. after
summertime) and in the transitional periods (e.g. strong wind, fog, etc.). For this purpose, hold a
lighted match or cigarette lighter flame to the opened fire door. If the flame is not drawn into the
opening, lift must be created in the chimney by a strong generation of heat (e.g. by paper or kindling).
If this does not succeed, then the stove must not be started up!
1) Turning the combustion air controller regulator com-
pletely to the left to the “+” position
2) If there is a throttle valve, open it fully.
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II in the language / languages: English as an attachment in your email.

The manual is 14.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II

Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II User Manual - German - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info