Manual Austroflamm Eric (page 6 of 16) (English, German, French, Italian)

696274

Zoom out

Zoom in

1/16

Eric 4 english

1. TECHNICAL DATA

As a stove of construction type 1, it is possible to connect it

to the chimney together with an exisiting other stove or

another hearth for solid fuels, as long as the chimney

dimensioning complies with DIN 4705, Part 3.

TECHNICAL DATA

Height

1412 mm

Width

510 mm

Depth

510 mm

Weight

340 kg

Flue pipe outlet diameter

150 mm

Nominal thermal output (EN 13240)

5 kW

Maximum thermal capacity

7 kW

Smallest heating capacity

2,5 kW

Room heating capacity

(depending on building insulation)

48–124 m³

Exhaust values for multiple use of the chimney in

accordance with DIN 4705, Part 3 and for the

calculation of the chimney measurements in

accordance with DIN 4705, Part 2

Fluegas mass flow

closed

5 g/s

Fluegas temperature

closed

273 °C

Minimum feed pressure

Nominal thermal output

closed

12 Pa

at 0.8 times

n. ther. outp.

10 Pa

2. IMPORTANT INFORMATION

The installation and operation information given here is of

general nature. National and European standards, local

and building regulations as well as fire prevention laws

must be observed during the operation of the stove.

General safety instructions for the

operation of your stove

 Thoroughly read the entire manual before starting up

your stove and observe the caution notices.

 Your heating unit may not be moved without

approved means of transport with sufficient load-bearing

capacity.

 Your heating unit is not suitable to be used as a stand

or as a ladder.

 Please keep in mind that your

stove’s surface heats up considerably

during operation. We therefore

recommend wearing a safety mitten

when operating your stove.

 Attention – stove varnish is no rust prevention!

 Make your children aware of this particular danger

and keep them at a distance from the heating unit

whenever it is in operation.

 Only burn approved fuels and materials listed in the

chapter “Clean Burning”.

 The burning or placing of flammable or explosive

materials, like empty spray cans and such like into the

firebox as well as the storage of such materials in the

immediate vicinity of your heating unit is strictly forbidden

due the danger of explosion.

 Do not wear loose or flammable clothing when adding

fuel to the fire.

 Placing non-heat-resistant objects on the heating unit

or in the vicinity of the heating unit is forbidden.

 Do not lay laundry onto the stove for drying. Laundry

hung up to dry must be kept at a safe distance from the

stove because of the danger of fire.

 The woodstove ERIC is no “slow combustion stove”

(must hold embers for at least 4 hours).

 During the operation of your heating unit it is

forbidden to use flammable or explosive materials in the

same or an adjacent room to the one in which your heating

unit is located.

Setting up your stove

Required safety distances (Minimum

distances – see name plate - in Fig. 2) towards

flammable materials

a > 850 mm

b > 000 (*1)/850 mm

c > 000 mm (*1)

d > 760 mm (*2)

(a – toward the front in the radiated area)

(b – to the sidel panel/glass front)

(c – to the back)

(d – distance to the ceiling)

*1: A wall installation with a 0 mm distance to a flammable

wall is only allowed if the optional heat protective plate is

mounted and if you use an insulated flue pipe (insulation

minimum 4 cm mineral/rock wool [AQI 132]).

*2: If a flammable ceiling needs to be protected, the

distance between the Designkamin top end and the ceiling

must be not less than 760 mm.

Subject to technical and optical modifications. Formatting and printing errors excepted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Eric in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Austroflamm Eric Manual

Product: