800540
16
Zoom out
Zoom in
Previous page
1/72
Next page
16 Id.Nr. 235161-13
SAFETY INSTRUCTIONS
General
This tank can be used by children eight years old and older as well as by persons with reduced physical,
sensory or mental capabilities or who lack experience and knowledge if they are supervised or if they
have been trained with regard to the safe use of the tank and understand the resulting risks. Children
may not play with the tank or its packaging. Cleaning and user maintenance may not be performed by
children without supervision.
The tank may only be installed and operated as described in this manual or the associated technical
information. Any other use is not proper and is therefore impermissible.
A defective tank may not continue to be operated.
There is a risk of scalding from hot water or hot components (e.g. ttings, hot water outlet pipe, etc.).
When using an electric immersion heater, proper corrosion protection is to be ensured.
Installation and commissioning
Installation and commissioning may only be performed by qualied specialised personnel who therefore
assume the responsibility for the proper assembly according to the applicable laws, standards and
guidelines.
The tank is mounted to a sucient load-bearing wall using a wall mount (note the total weight of the
lled tank) or is placed on a at horizontal surface after mounting the included adjustable feet. Ensure
that the subsurface at the installation location has a sucient load-bearing capacity.
The tank may only be set up in dry, freeze-protected spaces. The tank is to be completely emptied if
there is a risk of freezing.
The rated pressure specied on the nameplate may not be exceeded.
When installing the tank, a possible water leak is to be considered and a corresponding collection
container (including drain) is to be installed in a drainage object.
Following the commissioning, the tank and all connections are to be checked for leak tightness.
Electrical Connection
Only qualied specialised personnel may connect the tank to xed lines while observing the relevant
professional standards and laws.
A ground fault circuit interrupter with a trip current of I∆n ≤ 30mA must be installed upstream from the
electrical circuit.
Before working on the tank, this is to be de-energised, checked for the absence of voltage and secured
against being switched on again.
If a connection cable is damaged, immediately disconnect the power supply (circuit breaker) and call a
professional!
Connection cables may not be extended or cut through in any way.
Servicing
Maintenance, cleaning and any necessary repair or service work may only be performed by specialised
personnel who are qualied for this purpose.
Never try to x errors and faults yourself.
Necessary service and maintenance intervals are to be observed in accordance with these operating and
assembly instructions.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austria Email KDO 102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austria Email KDO 102 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info