800525
21
Zoom out
Zoom in
Previous page
1/28
Next page
21
Entlüften nach
Wartungsarbeiten
Der Durchlauferhitzer DEX ist mit einer
automatischen Luftblasenerkennung
ausgestattet, die ein versehentliches
Trockenlaufen verhindert. Trotzdem muss
das Gerät vor der erst en Inbetriebnahme
entlüftet werden. Nach jeder Entleerung
(z.B. nach Arbeiten in der Wasser-
installation, wegen Frostgefahr oder nach
Reparaturen am Gerät) muss das Gerät
vor der Wiederinbetriebnahme erneut ent-
lüftet werden.
1. Trennen Sie den Durchlauferhitzer vom
Netz, indem Sie die Sicherungen aus-
schalten.
2. Schrauben Sie den Strahlregler an der
Entnahmearmatur ab und öffnen Sie
zunächst das Kaltwasserzapfventil, um
die Wasserleitung sauberzuspülen und
eine Verschmutzung des Gerätes oder
des Strahlreglers zu vermeiden.
3. Öffnen und schließen Sie danach
mehrfach das zugehörige Warm-
wasser zapfventil, bis keine Luft mehr
aus der Leitung austritt und der
Durchlauferhitzer luftfrei ist.
4. Erst dann dürfen Sie die Stromzufuhr
zum Durchlauferhitzer wieder ein-
schalten und den Strahlregler wieder
einschrauben.
Venting after maintenance
work
The instantaneous water heater DEX fea-
tures an automatic air bubble protection
to prevent it from inadvertently running
dry. Nevertheless, the appliance must be
vented before using it for the first time.
Each time the appliance is emptied (e.g.
after work on the plumbing system, if
there is a risk of frost or following repair
work), the appliance must be re-vented
before it is used again.
1. Disconnect the instantaneous water
heater from the mains by disactivating
the fuses.
2. Unscrew the jet regulator on the outlet
fitting and open the cold water tap
valve to rinse out the water pipe and
avoid contaminating the appliance or
the jet regulator.
3. Open and close the hot water tap until
no more air emerges from the pipe and
all air has been eliminated from the
water heater.
4. Only then should you re-connect the
power supply to the instantaneous
water heater and screw the jet regula-
tor back in.
12. Gebrauch 12. How to use
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austria Email DEX18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austria Email DEX18 in the language / languages: English, German as an attachment in your email.

The manual is 2.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info