800525
20
Zoom out
Zoom in
Previous page
1/28
Next page
DEX 18 / 21 / 24 / 27 KW
20
Energiespartipp
Stellen Sie die gewünschte Temperatur
am Gerät ein und öffnen Sie nur das
Warmwasserzapfventil. Wenn Ihnen die
Wassertemperatur zu hoch ist, mischen
Sie kein kaltes Wasser zu, sondern geben
Sie am Gerät eine niedrigere Temperatur
ein. Wenn Sie kaltes Wasser zumischen,
wird das bereits erwärmte Wasser wieder
abgekühlt und es geht wertvolle Energie
verloren. Außerdem entzieht sich das
in der Armatur zuge mischte Kalt wasser
dem Regelungs bereich der Elek tronik, so
dass die Tem pe ra tur konstanz nicht mehr
gewährleistet ist.
Leistungsgrenze
Wenn die volle Leistung des Durchlauf-
erhitzers DEX nicht ausreicht, um die
gezapfte Wassermenge zu erhitzen, wird
dies durch Aufleuchten des Dezimal-
Punktes angezeigt (z.B. im Winter,
wenn mehrere Zapf stellen gleichzeitig
geöffnet sind). Durch Reduzierung des
Warmwasser durch flusses hört der Punkt
auf zu leuchten, da die Leistung wieder
ausreicht, um die eingestellte Temperatur
zu erreichen. Sie können die volle
Leistungs abgabe nutzen, um zum Beispiel
die Badewanne schnell zu füllen.
Betrieb an Solaranlagen
Bei Betrieb mit Solaranlagen muss
gewährleistet sein, dass die Einlauf-
temperatur 70 °C nicht überschreitet.
Sollte bei Betrieb mit vorerwärmtem
Wasser die Einlauftemperatur den vorge-
wählten Sollwert übersteigen, wird keine
Leistung abgegeben, der Dezimalpunkt
der Anzeige blinkt.
How to save energy
Set the exact temperature you need on
the appliance and open the hot water tap.
Once you feel that the water is too hot, do
not add any cold water and, instead, enter
a lower temperature on the appliance.
If you were to add cold water, the water
already heated would cool down again
and valuable energy would be wasted.
Moreover, the cold water added in the
tap is not covered by the control range
of the electronic circuitry, with the result
that temperature constancy is no longer
guaranteed.
Power limit
If the full output of the instantaneous
water heater DEX does not suffice to heat
the tapped quantity of water, this will be
indicated by the LCD decimal point (e.g.
in winter time, when open ing several taps
at once). When you reduce the hot water
flow rate, the LCD point stops indicating
because the output of the appliance is
again sufficient to reach the set tempera-
ture. You can use the full output to fill a
bathtub, for instance.
Operation with solar systems
When operating with solar systems, e.g.
an automatic mixing tap must ensure that
the inlet temperature does not exceed
70 °C.
If the inlet temperature exceeds the set-
point, the flashing decimal point of the
digital display indicates that the heating
power is switched off.
Keine Leistungsabgabe Unit provides no output
Leistungsgrenze erreicht Power limit
12. Gebrauch 12. How to use
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austria Email DEX18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austria Email DEX18 in the language / languages: English, German as an attachment in your email.

The manual is 2.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info