563991

Auriol Z31092 - IAN 79210 Manual

7
Zoom out
Zoom in
Previous page
1/49
Next page
7 GB/IE
For wall mounting:
Hang the weather station with the mount
32
on one screw.
For free standing:
Turn the stand
35
out from the bottom of the
weather station.
Connecting the weather station with the
outdoor sensor:
After removal of the battery safety strip the weather
station attempts to establish a connection with
the outdoor sensor. This process may take a few
minutes. When the connection with the outdoor
sensor has been successfully established, the
selected channel symbol
22
is shown the channel
of the outdoor sensor (To change the channel of
the sensor, see “Setting the channel”). If the con-
nection with the outdoor sensor is not established
automatically, this can be done manually by
pressing TX button
42
of the sensor”.
Radio Signal (DCF):
The DCF signal (time signal transmitter) consists
of time pulses emitted by one of the most accurate
clocks in the world close to Frankfurt / Main,
Germany – this varies by 1 second in a million
years.
Your weather station receives these signals under
ideal conditions up to a distance of approximately
1,500 km around Frankfurt / Main. Reception of
the radio signal usually takes about 3–10 minutes.
Operation
DCF radio signal reception
After the establishment of a connection with the
outdoor sensor the weather station automatically
begins to search for the DCF radio signal. The
search is shown in the LC display by the radio
tower symbol
18
flashing.
When the DCF radio signal is being successfully
received, the radio tower symbol
18
is shown
permanently in the display. If at the time of putting
the device into operation it is not possible to syn-
chronise with the atomic clock, you can also carry
out the clock adjustments manually (see “Setting the
Date / Language / Time / Time Zone Manually”).
Note: During the search for the signal, all func-
tion buttons except for the SNOOZE / LIGHT
button
12
are blocked on the weather station.
In order to correct any deviations from the exact
time, the clock is automatically synchronised with
the DCF radio signal every day at 01:00, 02:00
and 03:00. If the synchronisation with the DCF
signal does not succeed, the radio tower signal
goes out
18
. In this case, the weather station att-
empts to conduct a synchronisation with the DCF
radio tower at 04:00 and 05:00.
Reception of the DCF radio signal can also be
started manually on the weather station.
Press and hold down the / button
11
for 3 seconds. The weather station attempts
to receive the DCF radio signal. This process
takes several minutes and is indicated in the LC
display by a flashing radio tower symbol
18
.
If the connection with the DCF radio signal cannot
be established, the search is stopped. A further
attempt to establish a connection is made auto-
matically on the next full hour.
Setting the date / language /
location / clock / time zone
manually
At the location site of the weather station, recep-
tion of the DCF radio signal may be impaired or
interrupted. In this case it is possible to adjust the
device manually.
Follow these steps:
1. Press and hold down the MODE button
15
for about 3 seconds. The time zone display
flashes. Press the
/ button
11
and the
/ 12 / 24 button
14
to set the desired value.
Note: The standard setting for the time
zone is GMT+1. Set the weather station to
correspond to your time zone. Confirm your
setting by pressing the MODE button
15
.
2. The hour value of the time display
17
flash-
es. Press the
/ button
11
and the
/ 12 / 24 button
14
to set it to the desired
value.
Tip: By keeping the
/ button
11
and
the
/ 12 / 24 button
14
pressed, you
accelerate the process and reach the desired
value more quickly. This quicker method can
also be used for making the other settings.
If during a period of 30 seconds no buttons
are pressed, the LC display returns automati-
cally to the default display.
3. Confirm your settings by pressing the MODE
button
15
. The minute value of the time dis-
play
17
flashes. Press the / button
11
and the
/ 12 / 24 button
14
to set it to
the desired value.
4. Confirm your settings by pressing the MODE
button
15
. The second value of the time dis-
play
17
flashes. Press the / button
11
or the
/ 12 / 24 button
14
to set the sec-
ond value to 0.
5. Confirm your settings by pressing the MODE
button
15
. The year value flashes in the time
display
17
. Press the / button
11
and
the
/ 12 / 24 button
14
to set it to the
desired value.
6. Confirm your settings by pressing the MODE
button
15
. The month value of the date
display
16
flashes. Press the / button
11
and the / 12 / 24 button
14
to set it
to the desired value.
7. Confirm your settings by pressing the MODE
button
15
. The day value of the date display
16
flashes. Press the / button
11
and
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auriol Z31092 - IAN 79210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auriol Z31092 - IAN 79210 in the language / languages: English, German, Danish, Swedish, Finnish as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Auriol Z31092 - IAN 79210

Auriol Z31092 - IAN 79210 User Manual - German, Dutch, French, Italian - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info